16PCS Floor Jack Repair Sealing Tool Kit,3 Ton Floor Jack O Ring Kit with Oil Filler Plug for Improved Sealing of Hydraulic Systems,Standard Car Accessories Floor Jack Parts

Description

HIGH-PERFORMANCE SEALS FOR LONG-LASTING RELIABILITY -- PROVIDE COMPLETE PROTECTION FOR YOUR JACK, KEEPING EVERY LIFT SAFE AND SECUREProduct AttributesColors: BlackWeight: 0.67 ozMaterial: NBR, NylonPackaging: 16-Plunger Oil Seal*2, 13-Plunger Oil Seal*2, Base Pad*1, Oil Plug*1, Safety Ring*1, Bowl Seal*1, Nylon Bowl*1, Oil Seal at Bleeder*1, Top Cap Ring*1, 16 Thick Ring*1, Dust Cap*1, Washer*1, Steel Ball*2Product Size16 plunger oil seal: 16*21*2.5mm/16*20*2mm13 plunger oil seal: 13*18*2.5mm/13*17*2mmBase pad: 68*75*2.73mmSafety ring: 12*16*2mmBowl oil seal: 30*40*5.79mmNylon stopper bowl: 32*40*5.3mmOil seal at bleeder: 20*24*2mmTop cap ring: 30*37*3.39mm16 thick ring: 16*24*4.5mm(The above size data for the inner diameter * outer diameter * thickness)Oil plug: 13.61*13.61*12.04mmDust cap: ID: 15.34mmProduct FunctionsOur jack repair kit can be adapted to 3 tons of horizontal jacks. Have you encountered hydraulic fluid leaks, insufficient pressure or failure to maintain lift while using the jack? Replacing old parts can effectively avoid hydraulic fluid spills and keep the pressure in the hydraulic system stable13-plunger oil seal/16-plunger oil seal: To avoid hydraulic oil spillage from the gap between the plunger and the cylinder, installed in the contact part of the plunger and the cylinderOil plug: Closes the hydraulic oil injection port to avoid spillage of hydraulic oil, installed at the oil injection port of the jackNylon retaining bowl: Provides a cushioning and guiding effect to reduce the friction and wear of the plunger in the process of movement, installed at the top or bottom of the plunger, and the part in contact with the cylinder bodyTop cap ring: Fixes and seals the top of the plunger, installed on the top of the plunger and connected with the top capBleeder seal: Avoids hydraulic oil spillage from the bleeder valve and is installed at the interface of the bleeder valveDue to the manual measurement, the error is within 1-3mm is normal