DAP Wall and Cavity Foam with Wide Spray Applicator Aerosol, Off White, 20 oz. (7565000370)

Spray head was busted on all 4 cans and they will not return or replace them. Such a waste of money. Foam sprayed all over me and not the wall. DO NOT BUY!!!This is junk!!!

I have a cedar 4"x4" window sill that was beginning to get soft in a couple places. We were getting ready to have our house painted. I cleaned out all the rotted wood and used this to fill in the holes. I shot it in, let it set until morning and shaved off the access. Worked like a charm. Didn't have to pay to have the beam replaced. $20 well spent. Wear gloves with this stuff. Worked for what I needed.

Spraying the can upside down made it difficult to use for our application as there was not really any room for the can. Didn't stick to the board as well as it showed it should. Wont know exactly how well it worked until outside temps get below 10 degrees for a 3-5 days. Hopefully the pipe thats near that space will not freeze again

Save your money, the stuff doesn't work. Bought two cans, first nozzle didn't work. The second nozzle did. Unfortunately the foam doesn't stick to anything, falls out. Of course it's non refundable (because they know it sucks).

Make sure to but an extra bottle as your first practice one. After you get the hang of it and the spray down it's easy to use. We used it in a well house to do all the edges on the roof and the gaps the big bottle missed. It did exactly what we needed to do. There's a lot in the can and if you do it right it can go a long way.

Not as easy or clean as videos for the product was shown. I could have used a four dollar can with the same results.

I bought 3 cans on the intent of sealing the floor joists cavities in the crawl space walls. Went by the exact directions labeled on the can. There was no light even spray pattern like the video shows. Sprays out extremely too much volumn. It's like using the foam crack filler with too much pressure. No thin/wide spray pattern just a massive blob all at once that didn't stick because it was too much foam no matter how easy you touch the trigger. You would get the same results using crack filler, just a bigger mess!!! *AND THEY WILL NOT LET YOU RETURN THEM, EVEN THE UNUSED CANS THAT ARE STILL FACTORY WRAPPED * Do not buy!! 0 out of 10. Going to buy the krackin brand next like I should have in the first place.

Did not spray wide