Omron Qty 2 Japan D2F-F Ultra Subminiature Basic Micro Switch Compatible with Razer Apple MS SteelSeries Mouse

These switches work perfectly for replacements in the popular Logitech g502 mouse. There is a helpful ifixit guide for disassembly of the G502 that will walk you through getting to the circuit board so you can desolder the existing switches. Try to use a soldering iron at 450 and no higher or you risk removing the soldering pads for the switches.The ifixit guide will help with reassembly of the mouse.

Put these in a Logitech G9x mouse that's about 10 years old now. Clicks feel better than they did when it was new. These switches are a hair taller (0.1mm or less) than the micros they were replacing. A shim in the form of some card stock solved an over tightening issue and the mouse has worked flawlessly since

I went through two different versions of the Corsair M65 mouse (Pro and Elite). My Pro still works after about 2-3 years but I don't like the placement of the side buttons. When I found out about the Elite and the better placement, I decided to upgrade. Loved it but it started developing a left click issue after a few months where it wasn't registering half of my left clicks. I was lazy and didn't up trying to RMA it. Fast forward about a year - I've been using a Steel Series Rival 710. Works fine but I really missed the dedicated sniper button. I tried emulating it with software but there was a delay and the placement for the button was not good either. I started getting a little more handy with things during quarantine and figured I'd try fixing the Corsair M65 Elite. It was a little troublesome de-soldering the old cheap switches but after putting everything back together - works great!That was long winded - does what it needs to do and recommended!

It was what I ordered, and it worked well. Only problem was, it arrived later than advertised. When buying replacement parts from Amazon, I use the expected delivery time in deciding what to order, and where to order it from. Delays in delivery affect my ability to repair equipment on time.

I was hesitant on purchasing this because I have never opened up my mouse, let alone desolder and solder on new switches for it. However, thanks to a video on YouTube, I was able to find a reliable way to change out the micro-switches on my G703, since the original ones were starting to double-click. The G703 originally came with Omron switches, and since these are Omron switches as well, they feel right at home in my G703. I will say that the original switches were more clicky compared to these newer ones. The newer ones have a more muted click. It's not better or worse, just different. It is noticeably more quiet than the older micro-switches, however.Overall I am happy with these new switches. Hopefully, these new switches will last me for a few more years before I have to replace them again.

I bought this and replaced my original switch in my logitech mouse but now this one is exhibiting a slight double click again which was my original issue. It isn't as bad as before but I would still recommend buying a different brand as this batch is still finnicky when it comes to this issue.UPDATE:After a year its pretty much exactly the same as it was before I replaced it. Definitely not worth it.

Bought it for the Basilik X Hyperspeed, Installed it but due to lack of experience I friend the board and never got to use it :/ but it fit perfectly, just couldn't make it work.

great quality switches that saved me buying a new mouse. I used them with a Steel Series Rival mouse and one thing I learned was when removing the Teflon sliders from the bottom of the mouse to get to the screws, you really should heat them up first with a blow dryer to avoid scratching or bending them. I used a small plastic scraper type tool meant to be used in the disamembly of electronics and even being super careful I slightly bend/scratched a few of them which made the mouse not glide as well for about 2 weeks before they eventually smoothed out due to repeated use.