Broan-NuTone BCSD130WW Glacier 30-inch Under-Cabinet 4-Way Convertible Range Hood with 2-Speed Exhaust Fan and Light, 300 Max Blower CFM, White

Very bright, looks sharp, runs quietly and it extends out nicely without being a head clunker, which means it'll suck most of the steam from a big pot cooking on the front row. Not all but most. It has options for vented duct off the top and at the rear thru a wall or non-venting. It says One person can install it.I'm a 66yr gal, and I installed it by myself. First, attach the light bulbs (order separately) and wired a power cord (ditto). Remove whatever else you don't need, per instructions.I fought an old solid wood cupboard, couldn't use bolts & nuts cuz it had 2 solid bases for some reason. So, I used a paper bag as a map, drill the hole for the cord and only half drilled (4) 1" screws to the base, in their final spots. Then, lifted up the unit, wormed the power cord up to the base cabinet and then slid the unit onto the 4 screws. And then screwed them up tight. Order, if applicable:1. Appropriate bolts & nuts. Or screws. It didn't come with it. Does have 2 temp 'sliding' bolts but didn't do me any good. I screwed it on, using the screws as supports before tightening.2. Light bulbs (Philips 120v GU10 base, 50w 4wLEDs) I got the pack of 3, it came with a suction cup to help screw & twist the bulbs in place, or out, you'll need it!).3. Power cord plug (open wiring at the other end, standard) if you're connected to an outlet.4. Pair of non-duct filters (as I'm nonDucting, you do you) Part No 97020466, 2pk. The unit comes with pair of mesh filters. However they are for ducted vents. So, I use both! I slid my slightly smaller non-duct right on top of the unit mesh filters and closed it up.Final thought, check your gap from oven top to vent bottom - recommendation is 26" minimum and no more than 32" I believe? Mine's at 30". Perfect for my large steamy canning pots, light frying, and all around house cooking.Mine's all white, white oven, white cabinets. Love it.

Overall a well made, clean & simple design. Fan is very quiet on the low setting, and for those smokey dishes the high setting ventilates very well. The stainless steel is of good quality and well constructed. Comes with both round and rectangular outlets for the fan ducting, attachment points for screws are in the right place, and wiring is ready for easy connection; it took me about an hour to install, and although I am a contractor, it shouldn't be too much of a challenge for someone who is mechanically inclined. Only fly in the soup is that it does NOT come with bulbs. I was able to find the right type at my local lighting store and the lighting over the stove top is absolutely fantastic, but you could save yourself some aggravation and buy them here.

I bought this unit to replace a 45 year old Braun. It still worked fine, but showing its age. Bought the same brand as the original had held up well. It is a nice unit, fans exceptionally quiet, looks good. It is about 6” deeper than the old unit, not a problem. What I wish were different is the lighting. The old one had a single bulb dead center that lit the whole stove and back wall. This one has two lights 3” from the front edge. Lights the front of the stove well, but the rest, including the back wall is dark. As others have mentioned, and I concur, installing these lights is not easy. With that in mind, I installed them prior to mounting. Not looking forward to the time when I have to change one.All in all, a good unit reasonably priced.

So many range hoods have a manufacturer's nameplate, but this one is nice and plain. Even the light and fan switches are under the hood, but super easy to use without having to bend over. The fan is powerful and quieter than our previous hood. Installation was simple. The LED lights are nice and bright. I like the way it extends out about 2.5" farther than our previous hood so the front burners are covered better. All in all, we are very pleased with both the look and functionality of this range hood!

This was delivered in time and exactly as posted on Amazon.Very simple DIY (do it yourself)by following enclosed instructions.Works very well and looks very nice.Thank you!StephenM.Rodriguez