Delle Rosa Drinking Water Faucet, Solid Brass Kitchen Water Filter Faucet, Commercial Water Filtration Faucet for Under Sink Water Filter System Oil Rubbed Bronze

We LOVE this faucet!! So modern, solid, well made!This thing is built like a tank, is really nice looking, the valve operates sooo smoothly, and we love the way the water flows out. Really a nice classy piece of equipment.The only thing to be aware of is, , and this applies to ANY of these faucets, I found it not too hard to install, but depending on the hole you need to put it in, and the tubes/connections you need to fit it to, you 'might' have a little trouble or need some help.I think this is pretty normal and common sense.They give you most of what you need for a standard install.I had to do a little improv because of the hole size it fit into being a little too big and I also had to get some adapters for the tubing because I wanted to hook it up to a water filter, but it wasn't that big a deal.Love this thing, would buy it again in a minute and recommend it whole heartedly!

High pressure drinking faucet. Easy to install and keep clean.

I have a brantford moen kitchen faucet and the water filter faucet that was in the home did not match. Once the faucet went out, I searched for a replacement and found this one which is about as perfect a match as you'll ever find.The faucet is quality metal and feels very well made. It was well packaged to ensure no problems in shipping. The finish was the same throughout and a perfect oil rubbed bronze, not solid dark brown like some others that marketed models color as such.Installing was an adventure for DIY as there was not enough room between the sink and cabinet to get a wrench and too much in the way. Solution is a 3/4 or 19mm crowsfoot wrench also purchased from Amazon. Hope that helps someone else to think about that before you start. Super easy when you have the right tools. It came with 3 connectors, and one fit my line perfectly so no trip to the hardware store. If I had had the right tool at the start, would have taken maybe 15 minutes start to finish including uninstalling the old faucet.This functions very well. I was pleasantly surprised at the flow of this faucet. My previous faucet it took forever to fill a glass, and you had to hold the lever down, but this one is as fast as my sink faucet. It also does not splash despite the arc. It is a smooth water flow, and the on/off handle is like a traditional faucet in that it stays at the flow you wish. It is not one that you have to hold down and if you let go the flow stops.Also, the seller is responsive to questions as I had a few before buying. I absolutely recommend this faucet and seller.

This faucet matches the other rubbed bronze fixtures I have perfectly. Really easy to install, but as other reviewers have mentioned, make sure the hole you drill is small enough. This faucet has a pretty small base. The faucet appears to be made of quality materials and functions perfectly. The handle operates smoothly, the finish looks nice, and there are no drips or leaks. The water pressure is so high that if you turn the faucet on full blast quickly, you will end up with splashed water all over the place. You learn to turn it on slowly. Highly recommend.

Have owned this for 5 years and it looks new. This is on my kitchen sink and there has been no loss of color or scratching. VERY good value.

The oiled rubbed bronze is beautiful, and a perfect match with the oil rubbed bronze faucet we have.We like the shape. Very solid and well made. Very good flow.It comes with three adapters: 1/4. 3/8 for RO Tubing and 1/2" male pipe thread.It does not have an air gap (3 tubes), but if you already have one, this will work well for a second dispenser.This dispenser is ideal for a 1/2" counter hole. We put it in the sprayer hole, about 1 1/4". This is very marginal, but doable. The base is about 1 3/4 at the top of the counter, so it barely covers. The backup washer supplied is 1/2 x 1 1/2". The OD for the washer supplied is not enough for the hole, so I had to run out and buy a washer, 1/2 x 2". It was still difficult to mount because the base shifted as I was tightening the nut. If you have this problem, I recommend you make a blank out of wood using a hole saw with the right OD for your hole. Use electrical tape to make it a snug fit.I did not try this, but maybe, as an alternative, you can fill the hole in with wood putty and drill a 1/2" hole in the center.I would give it 5 stars if the 1/2 x 2" washer was also included.

Easy install. Quality faucet

Easy to install. Quality product at a bargain price.