KegcoKC D4743T-SS Beer Tower, Stainless Steel

While the tower looks nice and seems to be pouring good, I truly do not believe this a genuine it’s Kegco Tower. I have a Kegco kegerator and everyone one of the components with boxes had their brand and part numbers. The box was unbranded, the tap faucets are unbranded and the material seems different vs my original Kegco tower. It also does not come with instructions.

Bought this to switch my Kegerator from a single tap to a dual tap. Tower appears to be of good quality stainless. The tower cap had a small blemish on the edge, I just rotated it 180 degrees. I took out their insulation and swapped it with the heavier insulation from the single tap tower I was replacing. Also, note, this tower has no collar on it. So if you don't want exposed screw heads you either need to purchase a collar or in my case, transfer it from my original tower. The tower ships with two "generic" faucets. I'm using an InterTap flo-control for my stout and a regular InterTap faucet for ales, so the generics became spares. At the price though it was still worth purchasing even knowing I wasn't going to use their faucets. I'm still very happy with it, and if would recommend it for a very reasonably priced two tap conversion.

Exact replacement. 3" chrome plated barrel, complete with flange seal, flange holes identical, all threads identical, pre-installed supply line to barrel fitting, tapper came with small handle with threads compatible with AB-INBEV handle, supplied nuts and bolts for through-wall install were substituted, by me, with preexisting wood screws, so body was not compromised, faucet spanner was not supplied, but hand-tightening was sufficient, comes with extra supply line plastic washer, fifteen minute instalation with flat blade screw driver and crescent wrench, insulation and open-bottom allows communicated cooling of tower line for head foam and microbe control. I spent four hours and $20 trying to clean, reseal, and replumb my old leaking tap, only to discover a pinhole in my stainless tower line that had cost me $75 in beer and CO2. Please, learn from my mistakes and just replace it with this one. Dirt simple.

I purchased this double tap tower to convert my single tap Danby kegerator into a double tap. It came in a timely fashion and fit perfectly on my kegerator. Installation was very easy, only requiring the removal of 4 screws to uninstall the single tap tower and replace with the double tower. I had to purchase ball lock converters and CO2 lines to get the kegerator up and running but everything worked perfectly.After a few months, I have noticed that the faucets do sometimes get sticky and a bit tough to pull if I don't use them regularly, but I think the high sugar content of the beer I was tapping may be the issue. I plan on cleaning out the faucets to see if that solves the problem. Overall a great product, still shiny and looks like I just got it yesterday.I would definitely consider purchasing another if I ever decide to convert another kegerator.

Update after a year of use:The faucets are REALLY inexpensive and cheap. As per my original review the right faucet has always been loose and would open on it's own and leak beer all over the place. The left faucet handle just broke on us (the shaft inside from the pull that slides open the valve) and we had a beer flowing crisis, luckily the keg was near empty and we only had to scramble to fill 3 pitchers on the fly. Luckily we had the pitchers to catch the beer and luckily we had people over and were able to use the beer and not let it go to waste.The faucets that come with this unit are the cheapest Kegco has to offer and therefore not very stout. We're now upgrading the faucets to stainless steel like our old one, but that will cost nearly $60-70 for 2 plus shipping.So I think we would have been better off to just spec the parts we needed and built out a nicer version of this 'cheap-o' version they are selling here. Our recommendation - just buy better faucets to begin with and save yourself a ton of headache and hassle of dealing with this cheap junk.Original review:This is a nice and sturdy double tap system. The only issue we've had with it is that one of the faucets is a bit loose and doesn't always turn off completely.

I bought a kegorator w/single tap, but the kegorator itself, has enough room for two 5 gallon cornelius kegs. I am a homebrewer, so I wanted to keg my own and maximize my resources and options ;) I purchased this Double Tap Tower as the solution and it does not disapoint. Everything is very well made with plenty of tubing coming from the taps to the kegs. I removed the sankey adaptors(these are nice, if you are buying commercial kegs at your local beer store) to comply with my homebrew set-up. They work flawlessly and have a nice stainless shine to them, not evident in the listing photo.We all want to know, if there is anything else out there better for the price range. Well, I'm here to tell you, that for the price...absolutely not. If you are on the fence about purchasing this item, don't be. It works very well and is pleasing to the eye.Thanks and take care!

Tower is heavy and well made. As another guy stated, the holes are not clocked true. Dont lay this out for your build based on holes. I lined mine up by using a square on my counterface and measuring from the face of the square to the tip of each faucet. Marked, drilled and installed 6mm machine screw wood nut inserts from there.It did come with a nice foam insulation inside the tower. Plenty of room to run a 1" o.d. tower cooling line up the middle. I wish this tower was about 2 inches taller and had come with a base ring but it serves its purpose and does feel "nice"

The media could not be loaded.  This tower has not had any leaks or created excess foam... installation was fine and I would totally recommend this purchase. Taps feel solid - look no further for your homebrew needs...

bar

La torre es buena solo que llegan las valvulas flojas hay que ajustarlas. Y la base solo esta unida con 3 puntos de soldadura muy debiles uno se le rompio y pues no quedo exelente

Excelente producto, solo deberían de indicar especificaciones de las conexiones que incluye, Buenos acabados y calidad, el tiempo de entrega excelente.

Fácil de instalar y funciona bien. Cliente feliz :-)

Perfecto para una barra