Front Bowtie Overlay Decal Sticker - 2010-2013 Camaro - (Color: Gloss Red)

I have a 2SS/RS Convertible, Red Jewel Tintcoat and all of my accents are black (rally stripes, shark gills, etc).I found this product easy to use if you follow the instructions. I am no decal expert but you need to be patient and work carefully. The product is excellent and there are professionals that can help you apply if you are not skilled.1. Perform this procedure on a warm day or have a blow drier available to heat the decal before application.1. Spray the car bowtie and remove backing from decal. Spray the decal backing with water. This will allow you to reposition the decal if not perfectly aligned.2. Align the center of the bowtie and attach the center only, leaving the two sides dangling.3. Working from the center, press outward to the left edge, making sure there are no creases and minimizing bubbles. You will always get bubbles and this can be fixed later.4. Once the left side is done, repeat for the right side.5. You will see bubbles. Apply your blow drier to heat up the decal surface, then push the bubbles to the edge or break them up as best you can. I recommend you come back in 48 hours to fix the remaining bubbles.6. Fast forward 48 hours later. Use a pin to prick a hole in the bubbles and force the air out. No worries, you can not see the pin pricks.Voila, you have a very nice look at a reasonable price!

This is so great. I love the look it gives my Camaro. So much better than the factory bowtie. I had my husband do it for me since he is used to doing this kind of stuff. I was glad to get an extra one. Holding onto it. Thanks so much for a great product. 💚💚

Excellent quality & fit. Originally purchased front/rear inserts from another company on Amazon that was of poor quality and the front didn't fit properly (was not cut right and didn't cover the original gold insert properly). This one fit great and went on easily following the provided instructions. Insure you use a hair dryer as directed, it will help prevent any problems 'bending' and 'smoothing' the insert as you install it.

Due to the convex nature of the front Camaro emblem this vinyl piece is a bit tough to apply without leaving a few small wrinkles. I used a hairdryer to keep it warm and pliant and used a plastic card to smooth it down but still managed to have one very small wrinkle near the bottom edge. Still, it looks great when done and covers the gold emblem nicely!

works perfectly

Doesn't fit correctly and doesn't stick flat

This turned out to be easier than I expected and great quality. Not a flimsy decal. The seller sent me 2 in case i messed the first on up i assume. I appreciate that however the first one went on flawlessy!! Thank you for a great product!!!

As of 24 hours of applying the carbon fiber decal, I am happy with the purchase. It is slightly difficult to apply the front one, but just take your time you should be fine.