2" Red Aluminum Leveling Kit for 07-18 Chevy/GMC 1500-1313

Perfect

Made the front a little stiff but over all great product did exactly what I was looking for and the red was perfect for my build fitment was great and the look was definitely there

At first I tried to follow the review that states you do not need to remove the ball joint, however I could not get enough clearance as the upper control arm hits the stops. I did not have to remove the tie rods. If you have access to a lift it makes it easy, or just jack up the entire front. Loosten the strut bolts from the engine bay while on the ground, then lift up, remove the sway bar brackets from the frame (not the control arm), remove ball joint and be careful of the hub wire, then install spacer while lightly pushing lower control arm down. Whole process took maybe an hour due to ball joint spinning and having to find an Allen key and cutting it down to fit.

The install was very easy after watching a video on You Tube. The video that I watched showed how to install without having to drop the upper ball joint. I was able to install with just very minimal work. It does require you have another person to pry the shock over while you align the bolt. Once you have the bolt up you can put the nut on and tighten it up. I did put the bolts in from the bottom up however they do come with nylon washer bolts that are supposed to keep them from backing out. I know there is a lot of people on here that have left reviews saying to never put the bolts in from the bottom. I have never had a problem with them backing out also the factory bolts are put in from the bottom up with clips that snap onto the shock. Those clips are the same thread as the bolts that come with the kit. The only problem with using the clips is they are too big and will hit the axles on the back bolt. Once you have bolted the shocks on the rear bolts on the shocks will be really close to the axles however, they don't hit the axle. This installation technique saves a lot of time and keeps you from having unbolt most of your suspension like the instructions say to. The really only big difference is your bolts will go in from the bottom instead of the top.

08’ Silverado crew cab 4WD it leveled the truck perfectly. It’s only 1” thick but with the geometry after installed it added 1 3/4”-2” of lift. BUY YOUR OWN BOLTS! I broke 2 of their bolts tightening them down. Buy at least 2 10mm grade 8 bolts and make sure they’re 3” long measuring after you put a washer on them from end of bolt to that washer, that’ll eliminate having to cut the bolts that go under the front axle but I suggest buying all 4! Only took 30mins per side after I had the wheels off. All you need to remove is the sway bar link ends, and have 2 pry bars and an extra set of hands to install these. After you remove that sway bar ends and the 2 bolts in the bottom of the shock the lower control arm will drop on its own and just push it down with you hand and slide the spacer in from the back and then you’ll need a pry bar to pry the shock back and over the spacer while simultaneously using a second pry bar to push the shock left or right until you can slide the bolt into a hole. Do one bolt at a time and it’s pretty simple. Should be a 5 star but their bolts are not grade 8 and easy broke with a Milwaukee M12 3/8” impact.

Fast shipping easy to install. Great price and product.

Great way to add height to the front of my Silverado. Almost perfectly leveled out my truck and was very easy to install! The red looks great as well!

I had a rough country 2 inch leveling kit on my GMC in the past and it worked out great. I have a new truck so I bought one for this truck so I could put the tires that I had on a GMC onto my Chevy Silverado. And I had P295x 55x 20 and they’ve worked well with the 2 inch leveling kit.

Installation was easy! Fit perfectly. No issues since installed 3 months ago

Looks good fits perfect

Sits nice with the 2” Very easy to install, did it in my driveway Needed to purchase stronger nuts and bolts though

leveling works still a little off but for the money it’s worth it, made out of aluminum it’s really worth the money if you’re looking to level your truck

Used these to take the rake out of my 2018 silverado Highcountry. Worked perfect and easy to install, looks good and truck sites higher and level. I do have air bags so truck really looks perfect and rides good.