Softspikes Pulsar Fast Twist 3.0 Golf Cleat - 18 Count

I bought these to replace the original worn cleats on my foot joys. The two prong tool I already had for cleat installation was useless for removal. After a losing battle of the metal prongs shearing right through the rubber on all of the of the old cleats in one shoe, I switched to medium sized needle nose pliers and they came right out. For installation: clean any excess debris out old of the mounting holes and apply some dish soap or soap foam for lubrication. Insert the cleat and Rotate counter clockwise with medium pressure until it drops in then rotate a quarter turn clockwise to lock it in using a lot of pressure. Failure to follow this process or similar process will make this way more difficult at the fit is very tight, or the cleat may not fully engage all in all three slots. Make sure the cleat is all the way in, you can peal it off with minimal finger pressure if all three slots are not engaged. So check this on each one before finishing. Hope this helps!

Perfect and identical replacement for original spikes. The reviews stating they fell out did not use a tool in order to make sure it clicks a second time. Make sure you clean the fitting well, seat it properly, click once. Then get your tool and tighten until it clicks again. No complaints!

Remove the old worn out spike by turning counterclockwise and thoroughly clean the old spike hole. Insert new spike and turn two clicks clockwise until firmly in place with spike tool.

Work well. However one spike has broken teeth after 5 riding rounds of golf.

Great fit, they work well on my spikes

Exactly as described and fit the brand golf shoes it stated it did. Good quality.

Affordable. Easy to install. BE SURE THEYRE COMPATIBLE WITH YOUR SHOES!

These fit my husband’s golf shoes perfectly. Great price, too.