eSUNPLA+ Filament 1.75mm, Enhanced Toughness, Dimensional Accuracy +/- 0.03mm, 1KG Spool (2.2 LBS) 3D Printing Filament for 3D Printers, Polylactic Acid, Black

With the purchase of a new printer (BambuLabs X1Carbon) I have been going through my stock of filament at a rapid rate. Fortunately for me a sale day popped up and had a range of eSun filaments at reduced prices. eSun PETG is one of my favourites so I thought I would try PLA+ for the first time.First things first - it comes very securely packaged in a proper cardboard box, within which the roll is in a thick vacuum sealed plastic bag complete with dissicant. You also get a nicely printed booklet showing the range of filaments and the associated temperatures for optimal performance, which is a nice touch. Quite often the manufacturer just leaves you to do some trial and error.As an aside to anyone considering the X1 or X1Carbon or already owns it - this filament fits into the AMS unit perfectly without fouling the lid or running off-center. The only thing missing is an NFC chip so the unit recognises it automatically!It's pretty forgiving stuff, I used the default settings for PLA which were actually a little low on the temperature side, but it printed quite happily without getting grumpy and causing me any problems. I did up the temperature to the suggested settings after the initial print and it has continued to print well. I have had no issues at all with adhesion on the Bambu flex plate with any filament, this filament included. From my experience, the way this prints I don't imagine anyone else would have any issues either.This filament is definitely worth 5 stars in my opinion, the fact it was on sale and cost less than unbranded mystery filament usually does was the icing on the cake and I wouldn't hesitate to buy it again.

I simply wanted something more authentic for printing figurines, skulls, etc. and gave this a try since it's available in "bone white". It fills the brief perfectly. There's nothing particularly special to it, it just works. Had no printing issues with it at all beyond some stringing on particularly big prints but that's probably my fault. Spools well wound as well.

This black filament is top-notch. The colour is deep and consistent, giving all my prints a sleek, professional look. It feeds smoothly through my printer with no jams or issues. The quality is spot on, making it perfect for all my detailed projects. Highly recommend for anyone looking for reliable and affordable filament

I've been using eSun PLA+ since I began 3D printing in May. I went through 9 x 1kg spools (1 silver, 2 purple, 1 cold white, 4 black and 1 grey) without any problems. The next spool (grey) was stringing like mad, no matter what temperature and retraction settings I used. I switched to a spool of purple and had no issues, so it wasn't something wrong with my printer.So, after chatting online with some more experienced printers, I bought a filament dryer. I weighed what was left of the grey spool (approx 900g including the spool) before putting it in - after 4 hours I took it out and weighed it again - it was 4 g lighter. That told me that the stringing problems I'd been having were down to excessive moisture in the filament.Once the purple roll was finished I put the now dried grey roll back on and it printed fine until near the end (probably about 150-200g of filament remaining) where I found it was a bit tangled - actually, I realised what was happening because it almost jerked the spool and roller off the shelf above the printer. Luckily I caught it before it wrecked a print, not to mention the printer. I shifted the spool onto the normal frame-mounted spool holder.At that point I went to put the next roll of grey into the filament dryer and saw that it was really badly wound. I spent several hours winding it onto an empty spool, then back onto the original spool. It was quite clear to me that it had been very badly rewound onto the spool it had come on - the filament was twisted and in many points looked to be stressed. I then dried it for 4 hours, leaving it in the drier until the roll on the printer finished. It started printing OK, but then there was some stringing again - I think it probably needed more than 4 hours in the drier. Yesterday I switched over to a roll of purple. It looked to be much better wound...right up until it got about 3 layers down where the filament started to get stuck under what should have been lower layers.Interestingly, all three spools I've had problems with were ordered during September. I suspect that there must have been a major issue at their plant a few months ago for their quality control to have slipped so badly.I'm reluctant to change brands as up until these three spools I've had a great experience with the eSun PLA+ - zero clogs, great print quality, good layer adhesion. However, I do have some Sunlu PLA+ to try.

Perfect filament no issues with printing very durable and very consistent, has some small flexibility

Every single 3d filament i used from from eSUN, i only have good things to say, print really well, does not retain moisture ( that much) sticks to the build plate, nice layer bonding!perfect product for hobbies and playing around, nice color accuracy as well.I really recommend and will keep buying.

Took a little bit of time to get the settings right on my printer but once sorted good quality prints.

This is the best PLA I have ever used, hands-down. It's really tough, and really easy to print with. No bed adhesion, layer adhesion, or stringing issues at all. Prints great even at high speeds like 400mm/s. The colors are very true as well. Had some minor tangling issues from one of my rolls, but all the others have been fine. Overall, Very good PLA!! Highly Recommended! My prints were on the BambuLab A1 Mini.

Ik heb het eSUN PLA+ filament getest op de Ender 3 V2 en Qidi Q1 Pro, en de prestaties zijn uitstekend. Dit filament print probleemloos met een stabiele doorvoer en zorgt voor mooie, consistente prints zonder verstoppingen. De verhoogde taaiheid maakt de geprinte objecten extra stevig en duurzaam, ideaal voor functionele onderdelen. Een aanrader voor wie op zoek is naar betrouwbaar PLA+ met een nette afwerking en extra sterkte!

Le eSUN PLA+ Filament est un produit de très bonne qualité pour les impressions 3D. La précision dimensionnelle est parfaite avec une tolérance de +/- 0.03mm, ce qui assure une grande régularité dans les impressions. Le filament est robuste, avec une bonne ténacité, ce qui permet de réaliser des objets solides et durables. La bobine de 3KG offre une grande autonomie pour vos projets. Très satisfait de la couleur grise et des résultats de mes impressions !

Ich habe das eSUN PLA+ Filament in der 1.75mm Variante getestet und bin insgesamt sehr zufrieden mit den Ergebnissen. Hier sind einige Punkte, die ich hervorheben möchte:Druckqualität: Die Druckergebnisse sind beeindruckend. Das Filament haftet gut auf der Druckoberfläche und sorgt für eine ausgezeichnete Schichthaftung. Die Oberflächenqualität ist glatt und die Details werden präzise wiedergegeben.Verarbeitung: Das Filament lässt sich leicht verarbeiten und hat eine konstante Durchmessertoleranz, was zu einer gleichmäßigen Extrusion führt. Ich hatte während des Druckens keine Probleme mit Verstopfungen oder Unterextrusion.Farbe und Finish: eSUN bietet eine breite Palette an Farben, die lebendig und gut gesättigt sind. Das matte Finish des PLA+ verleiht den Drucken ein ansprechendes Aussehen.Festigkeit: Im Vergleich zu herkömmlichem PLA ist das PLA+ deutlich robuster und weniger spröde. Dies macht es ideal für funktionale Teile, die etwas mehr Belastung aushalten müssen.Geruch: Ein weiterer Pluspunkt ist der relativ geringe Geruch beim Drucken, was das Arbeiten im Innenbereich angenehmer macht.Fazit: Insgesamt kann ich das eSUN PLA+ Filament jedem empfehlen, der nach einem zuverlässigen und qualitativ hochwertigen Filament sucht. Es eignet sich sowohl für Anfänger als auch für erfahrene Benutzer, die Wert auf gute Druckergebnisse legen. Ich werde definitiv weiterhin mit diesem Filament arbeiten!

Bra pla+ filament