UPSIREN UTP-6 12.8w/mk Thermal Putty for VGA GPU IC Processor Rapid Cooling Thermal Pad Replacement Heat Blocking Putty High Performance (10g)

I recently redid my gigabyte RTX 3090, 2023 zephyrus g14, & a 2020 zephyrus g14. When I was replacing the old thermal compounds, I used this on the memory chips, power delivery, and other ICs that were covered in thermal pad material. This stuff actually provided a little bit lower temperatures than K5 pro. The device I tested the hardest was a 380 and the memory junction temperatures went from 90C (k5 pro down to 78C max.). I used 3d mark to stress test my GPU for 2 hours. I forgot to turn on my portable ac before going to make food. So that max temperature is what was achieved in a bedroom that hit 80°F(26.6C) inside. The gigabyte 380 requires a thicker application because some of the thermal pads 2 or 2.5mm thick. I don't remember the improvements on the two zephyrus laptops, but it was better than the factory stuff. The thermal putty does like to stick to the little stick after sooping a few times, but scraping the stick off back into the container and then re-scooping helps to stop accidentally picking the putty back up off whatever you're applying it to.

Works really well in dropping temperatures. Guaranteed will get a drop in vram temperatures versus stock. Dont use on the gpu die and use ptm 7950 for that instead

Great product. Much better than trying to figure out what pad size and thickness to get. Temp reduction is also better than pads. I would recommend going to a larger size than what you think you need. Having a extra on hand has never hurt anyone.

Good stuff. It’s lowered the temperatures of my laptop

Works well. A bit tricky to apply but conforms when you press it down. I applied putty to laptop VRMs and so far haven't experienced crashes in games (compared to Asus stock application). Keep in mind the product picture is for the 50g variant. I used around 80% of the 10g bottle for one laptop (cpu and gpu not included, they had ptm7950).

Used to bridge the gap on the NUC Extreme 13 PCH heatsink and CPU card shroud.

Muy buen producto a pesar de ser económico cumple con lo que es y mejor que algunos de marcas caras, los 10gr se te pueden quedar cortos pero si es para UN solo cambio de masilla queda bien y sobra un poco. 10/10 y lo volvería a comprar.

The 10grams option is not accurately represented by the photo. My surprise was the container was only a 6th to a 1/4 full. I based my purchase off the volume pictured. I did in fact verify it was in 10 grams on my scale. Now I have to buy more

El producto llegó en buenas condiciones, lo probaré estos días y actualizaré mi opinión

Works pretty well. Temps dropped significantly.

Excelente producto para remplazar thermalpads

Its the real thing and it works really well

I ordered this expecting the size shown in the product images—but what arrived was significantly smaller, more like a sample than the full-size item pictured. While it works fine, the discrepancy in size is misleading and disappointing. The dimensions were not as advertised, so buyers beware.