LX Desk Mount Dual Monitor Arm Horizontal

挟んでも使えるし、机に穴をあけても使える。 ベットと引っ付いている机の為、机の隅 には、大きな補強があり、挟んで取り付けが不可能でしたが、この商品は 穴を開ければ取り付けが可能な為、無事に取り付けが出来ました。とても頑丈で良い。 上はモニター、下はエキタブを取り付けてます。 画面は大きめサイズを取り付けましたが、とてもしっかりとしており、グラグラしない。 良い買い物だと思います。

組み立てが恐ろしい程簡単でデスクにもつけやすくかなり頑丈で文句のつけ所なし

まさに高かろう良かろうの実例ではないでしょうか。 左に27インチ、右に24.5インチのモニターを接続して使っていますが、その安定性や操作性は絶賛に値します。かなり自由に場所を設定できることに加え、調整ネジをいじれば、ほとんど動かないようにもできます。また、見た目も高級感があります。 唯一の問題と言えば値段ですが、安いアームを何回も乗り換えるよりはエルゴトロンを長期スパンで使用する方がいいと個人的には思います。

やはり4000円～5000円ほどで売られているものとは品質が違いますね。しっかりしている。自分は安いモニターアームを買って1年でネジが馬鹿になって壊れてしまったので、今度はちゃんとしたものをと思い、こちらを買いました。ただ、一つ残念だったのは、縦に2つ並べる際、モニターを下に傾けることができないので、上のモニターを少し下にお辞儀させたくてもできないのが残念でした。まぁでも許容範囲として自分の中では一応許せていますが、これは惜しいポイントではありますね。

高いけどその分強度があり、とても便利です！ 買う価値があります。 マルチモニターの方にはオススメします。

安定しているし、角度調整もすごくしやすい。前使っていたアームは固くて微調整が難しかったけど、これはしっかり固定してあるのにモニターをかんたんに動かせます！

24インチモニター2枚で使用。 横並び・縦並びどちらもスムーズに配置でき、可動域が広く動きも滑らか。 設置後はデスク周りがスッキリし、作業効率が向上しました。 エルゴトロン独自の機構で高さ調整も軽く、10年保証付きで安心して使えます。

こういった商品はたくさん買わないから比較出来ないけどヨォ 組み立ては分かりやすかったし、クソ重いモニターもしっかり支えてくれるしで大助かりだぜぇ。 だけどよ、一部部品が重いからそこは気をつけてくれよな！

Excelente producto muchas gracias a :Servicios Comerciales Amazon México S. de R.L. de C.V. de lo mejor que he comprado, me ayuda para capturar cosas de gaming o programar con 2 pantallas muy buenos una inversion que valio la pena

this review comes after 2+ years of using this product. i have mounted laptops, 27" LCDs, 34" ultrawide LCDS on it. been playing arround with it for vertical and horizontal arrangement, would always recommend it to a friend. note that when u swap for a heavier monitor, u do have to tighten/loosen the screw thing a bit to adjust the weight. once u reach the optimal "zero gravity" setting, u will be a happy camper as i am. the only "con" i can think of is the cable management system. it hides well in the bottom half of the arm, but cables still reveal themselves in the upper arm. (they only have a hindge thing for u to tie it) I'd really like the thumb screws at the VESA spot. makes it easy to remove / swap monitors without any tools assist.

About a year ago my office was notified we would be moving to a different floor in our office building and would be getting new Steelcase office furniture (cubicles and a chair). At the time I was using two monitors sitting on desk stands that didn't have any adjustment range. One monitor stand was so short I had it sitting on a empty portable camera box to get the the monitor heights about even. The monitors took up a lot of desk space and I had to lean in to read the screens with my computer reading glasses. Our building services and IT folks had no suggestions so I did the reasearch on monitor stands and whether they would fit the new cubical desktops. Fortunately the new furniture had a cable route space gap at the back that would allow the C-Clamp mount to work fine. After researching all kinds of monitor stands online I found the Ergotron LX dual monitor stand fit my needs just right. The MSRP price was good and the Amazon price was excellent. Free shipping on top of that and we had a deal. The dual monitor "kit" shipped with excellent packing and instructions and I had no difficulty in assembling it and mounting it to the back of the cubicle desk top. Since my PC operating position is in one corner of the cube I initially installed the base mount on the left but later moved it to the right side to get a little more left/right angle adjustment to avoid sun glare on my monitors coming in my office windows. Routing the cables along the articulating arms was easy and I am happy with the installation. At our floors open house where we had visitors looking at how our offices/cubes were layed out, folks were asking what brand and model monitor stand I was using to see about getting their own. One thing I might have done differently was to order two single Ergotron LX articulating arms with bases so I could mount one on the left and one one right of my corner desktop to be able to move the monitors closer to the operater (me). I'm still satisfied with the additional desk space provided and the range of movement the Ergotron provides, I will keep it for a long time. If there's another office move it will be the first thing I pack to go with me. 7/15/2013 Well, I've had to move my office to another floor and I'm still using the same Ergotron listed above. The monitor arms are still working great and moving the stand was easy. I even got the chance to upgrade my monitors to (2) two new ViewSonic VP2365-LED 23" widescreen monitors (also purchased on Amazon). They're great too. Please note when shopping for monitors or mounts, that the monitor can mount to the stand you're considering and vise versa. Mine uses the "VESA" standard (4) screw mount. To use, just unscrew the monitor from the fixed base it comes with and attach it to the compatable monitor arm mount. If only the hundred cardboard moving boxes I had to assemble, pack, and unpack were as easy to work with, I would be a happy camper. 12/14/2016 This dual monitor stand is still going and I'm still happy with it. So much so that I have recommended one for my boss who has finally decided she should upgrade to a dual display to keep up with the mounds of PC information she deals with every day. I had forgot this review but recently discovered it again while looking for the model number of the one I purchased in 2010. This is the one I will order for her based on my experience with my Ergotron LX. I wish my PC's were as reliable as this dual monitor stand have been.

Bardzo dobry sprzęt, choc wymagał tunningu dla moich potrzeb. Aby zmieścić dwa ekrany 42" + 34" musiałem wymienić główna rurę na dłuższa 100cm (nierdzewna rura 35x3mm + odpowiednie nagwintowanie). W jednym z ramion spiłować blokadę dolnego pochyłu, która oryginalnie pozwala tylko na -5 stopni. Oraz dokupiłem dwie blokady obrotu 97-774-003. Po tych przeróbkach uchwyt w pełni spełnia moje wymagania.

This arm is almost exactly what I was looking for. * Very full range of motion for two monitors. I can pull them out, push them back, tilt them forward or sideways, raise them, etc. * I can mount it against a wall, push the monitors back, and only require about two inches of buffer between the desk and the wall. This allows me to use my full desk depth and not require buffer off of the wall. * Sturdy. Tensions are adjustable. No sagging after a week of use. * The rail allows both monitors to be easily aligned, minimizing the hassle of manually aligning individual arms. I mounted two 27" 2k (16:9) monitors and they fit fine. The Ergotron website compatibility checker said they wouldn't fit, but they do and I have about 1/2" buffer left on the rail. Between that and that it's rated for up to 20 lbs per monitor, I would imagine that almost any set of 27" monitors would fit on this. Larger monitors will likely require the next size of of the Ergotron 2 monitor rail mount. The biggest downside is probably the cable management, or lack thereof. The only provided cable management is that the lower half of the arm has a removable plate at the bottom that allows a couple cables to be run through it. I have 2 display cables and 1 power cable per monitor (6 total) and they don't come close to all fitting. I have to do the cable management myself. A more minor downside is that if the monitors are pushed back with the arm angled to the side (ex, there's a wall behind the monitors) the monitor stand won't align with the center of the monitors unless the monitors are very high. The arm is made of two pieces of unequal length (all Erogotron arms are), so angling the arm to the side and having the top piece double back the bottom piece yields a center stand that is 2-3 inches offset from the center of the monitors. As an aside, here's a detailed schematic showing the exact measurements: https://www.ergodirect.com/18667-ergotron-45-489-026-lx-desk-mount-dual-direct-arm-polished-aluminum.html