Drip Irrigation System, 164FT Garden Irrigation System 1/4, Blank Distribution Tubing Watering Drip Kit Automatic Irrigation Equipment for Garden Greenhouse, Flower Bed,Patio,Lawn

Update 5/3/2024: We finished putting the entire system together after doing a little research. Putting the two kits together worked as planned - you can go up to 200ft with 1/2 inch hose. The problem we were having is having tooany emitters, going too far per connection on the 1/2-1/4 inch Ts. We were trying to do two 10ft lines per garden box. Some of the emitters wouldn't even work. So we did just between one and two feet per T connection and now everything works perfectly. If you are confused about what you need, look up the 200/200, 30/30, 480/480 rule - part of it is, the further the line has to go, the bigger the supply line needs to be. There are other technical details with that, but too much to type here.As far as assembly goes, it took us two days to install, because we ran some underground through PVC. The first day consisted mainly of getting the half inch tube in (55 ft, collectively). That was the easy part, because the half inch tube is extremely easy to work with. The second day was adding Ts and feeder lines. Tried hot water and didn't see a real difference. Pushing them on from a little ways back with a little air in the tube and rocking them back and forth was a lot easier. My hands still hurt for a few days after, but still totally worth the work.We also have plenty of 1/4 inch tube left and a bunch of emitters and some spare parts we plan to use in the container part of the garden.Anyway . . . As far as function goes, this is one of the best purchases we have made. We got it to replace soaker hoses and my, what a difference. 100% happy with this purchase. Would recommend and will definitely order another kit, if we need to.**********Old review*******I was actually surprised by the quality of the hose and fittings. The emitters are a little questionable, but the rest of the kit is nice. The 1/2 inch hose is nice and thick and the 1/4 inch is flexible, but good quality. Not gonna lie, though. It's tedious to put together. Even warming the tube, my hands hurt after assembling two runs. May have to get some grippy gloves or something, to finish the rest. I've found rocking the tube back and forth makes it easier to get on.We bought two kits, because the 1/2 inch hose was about 10 feet short of being able to service the whole garden. I can't really give a fair rating on function yet, because we have a few issues to resolve that may be affecting how everything works.

This watering system is easy to use and very versatile. I was able to focus on some flowers and newly planted bushes; and, I have plenty of tubing and pieces to expand/alter in the future as my garden grows. It was a great buy.

If I could give it negative stars I would. Honestly junk!!! The tubing is stretchy which sounds great but when it gets warm in the sun many leaks happen also the tubing is super thin and gets pin holes very easy. The tee barb’s provided are too big for the tubing making it difficult to install and when you finally get it installed it has stretched the tubing out and it leaks. Some of the emitters literally shot off the end of the tubing tubing because of the shitty tubing. The emitters themselves seem ok-ish, they can be adjusted but no two emitters are the same some you have to open more than others to get flow and others still emit even when closed. Not easy to install due to the tee barbs, leaks all over. Do not buy this product!!!

The media could not be loaded. This trip kit was fairly easy to figure out. The instructions were vague. I spread all the components out on a table and referenced the visual instructions to make sense of the parts.I have this irrigation set up in (4) 4'x8' raised beds that have 6-8 drips each. They only give you 4 of the large tube to 1/4" branch units, but tons of misters and drippers. (The misters dont mist, its more like a sqirt gun stream even after adjustment.) I needed a branch unit for each of my raised beds (see my video for how I set it up) My only other complaint is that the end bed gets very little water pressure. I wish there was a way to hook up the hose to the middle of the system for my 4 beds so the water pressure could be distributed a little more evenly. Maybe the company has the correct part, but I haven't looked and that component wasn't in the kit. The system is super easy to edit, so I could easily go to home depot for the part and try to jerryrig somthing.Tip- warm the tube's in the sun, or use very hot water to soften them a bit. I would say the tubes were very soft sitting in 80 degree sunshine and it was still a little difficult. I made sure there was a proper connection and didn't have any leaks when it started up.Over all, its a great value. I bought a second kit.It looks like your typical drip system, works well and is good quality.

Kinda dosnt handle so much pressure

Love this complete set of drip irrigation pieces. I was able to cover my entire garden with the easy to cut tubing. The fittings are very tight so they will not leak or pop off the tubing. There is a variety of fittings and spray nozzles that have flow adjustments on each one.

Good value for the money. Works pretty well, after a bit of a tedious install, but all of these systems are made the same so not any different than any other of this type. Lots of sprinkler heads of various types and customizable to you garden layout. Would buy again.

I was extremely pleased with this kit. I was about to run more than 50 drip pieces and hose off the main quad tee provided in the kit. The worst part was simply setting everything up and running hose to each plant. I recommend installing a filter inline with the main hose, especially if you are using well water to minimize/eliminate the possibility of nozzles getting clogged with debris/sediment.The tips are great and can be adjusted for more or less water output.