Product details: DC input: 24V DC input range: 21V-30V No Load Current Draw: 0.8A Efficiency:90% AC output: 120V AC Regulation:3% Frequency: 60Hz Socket:15A USA type Low Voltage Alarm:19.5V-21.5V Low Voltage Shut Down: 19V-20V Over Load: shut off, recover manually Over Voltage Shut Down:31V Over Thermal: Shut Off Output Automatically, Over voltage protection Cooling Ways: Cooling Fan will run when the temperature is over 50 degree Precautions: 1. Please use the standard battery cables we sent, or a full power output may not be guaranteed. And the spare fuses in the package are just used when the original ones are burned by accident. 2. Please do not connect the inverter with the grid power, and a reverse connection of positive and negative is also forbidden. 3. Please do not overload. If your applications are inductive loads, please choose the inverters whose continuous power is 3-7 times higher than the watts of your appliances. If you want to power up a refrigerator, we suggest you use 10 times higher power inverter. 4. Please turn off the load first then turn off the inverter. And as there is a soft start function, please turn on the inverter first then turn on your loads, or the output may not stable at the first seconds. 5. For a red light flashing, it is a kind reminder to note you the input voltage is a bit high, you can regardless of it. If the input is too high, the inverter will shut down automaticly.Please make sure your battery is fully charged before using. 6. The output voltage can be adjusted in a little range.
R**S
Works well but manual needs work
I purchased this unit to use on an off grid solar system in Vermont. I am planing to use it for the for the lighting circuits in the cabin. I am planning to use a higher power unit for the kitchen circuits which will include a coffee maker, toaster and garbage disposal.I have been test running the unit on a limited solar system setup in my garage before taking it to Vermont. The unit worked well with an 800 watt test load. The information on the built in LED display is a nice feature.The manual caused a couple of concerns. I purchased the unit for use on 24 volt DC to 120 volt AC system. The manual states that the unit puts out 220 VAC. (page 2 section 4 item 1. ) After double checking the model information on other references I confirmed that I had a 120 VAC model.The second concern is that they supply spare fuses for repairing a blown fuses. After examining the unit there is no way to located the fuses unless you open the unit. The manual gives no instruction on where the fuses are located. Additionally opening a unit like this typically voids the warranty. Really would be nice if the manual made it clear that you are allowed to open the unit?
J**Y
Great Product for My Needs
Looking for a smaller inverter to handle our power supply needs for a mini bard. This little guy hums right along.Handles battery chargers & overhead lights with ease. Would buy again with out hesitation.
Trustpilot
2 weeks ago
2 months ago
