Epoxy Resin Kit 16OZ, Clear Crystal Resina Epoxica Food Safe, Casting Resin for Art Craft, Jewelry Making, DIY

So I haven't actually gotten a chance to use this on a craft, but I did mix a bit of it up just to test it. It mixed nicely and I did not see it over abundance of bubbles. It was super clear when it cured which was really nice. my main reason for buying this was because the brand I have been using yellowed very badly after it cured and sat for a while. So unfortunately I won't know if this yellows for several months, however for now I'm very pleased with it. The price is on par with other Resins, and if you get a Coupon then you get a very good deal. As far as it being food safe, I probably wouldn't eat off of this, just because it's resin – it's literally toxic if you breathe it. I can't imagine putting food on it. Just my two cents on that.

I've tried a few different epoxy resins, and this one has quickly become my go-to. The instructions are clear and straightforward, and the 1:1 mixing ratio makes it incredibly easy to use. I was particularly impressed with how crystal-clear the resin cured. My finished pieces have a beautiful, glossy finish that really showcases the natural beauty.I did encounter a few tiny bubbles, but a quick pass with my heat gun took care of them. As another reviewer mentioned, it's crucial to properly prepare your surface before pouring to avoid trapped air bubbles. I learned that lesson the hard way with my first project!The odor during mixing and curing was minimal, which was a huge plus. I was able to work comfortably in my garage without feeling overwhelmed by fumes.Overall, this epoxy resin offers excellent value for the price. It's easy to use, produces beautiful results, and the low odor makes it a pleasure to work with. Whether you're a seasoned pro or just starting out, I highly recommend giving this product a try. You won't be disappointed!

This epoxy resin is top-notch! Its professional-grade formula ensures a food-safe finish with a glossy, vibrant effect that lasts. The surface is highly resistant to heat, scratches, and yellowing, making it perfect for protecting your crafts. Plus, the added defoaming agent works wonders—bubbles vanish within 2 hours, and the resin levels itself beautifully. An excellent choice for any DIY project or craft!

This was my first use of resin. I ordered this to put a nice finish to the flag shown in the pictures.All of the research I did said for this type of pour, you need a thicker viscosity product. After reviewing this, I decided to try it out.First, this is a VERY easy resin to use. Measure, mix, pour and finished. And after it cures, it is very clear. Yes, there can be little bubbles to deal with, just like any epoxy, but waving a hair dryer or heat gun quickly over the bubble and it’s gone. I ended up with a few small bubbles in my finished piece, but that is MY fault, not a fault of the resin. I researched a little more after I noticed the bubbles and sure enough, you should seal wood before applying the resin. If you look closely at the emblem in the stars you can see the small bubbles. There is a lot of cuts in the wood around that area that must have released trapped air as the resin was setting.I mixed and poured the resin in my craft room in the house and the smell was very mild.Overall, I believe I have found my goto resin!

I mostly use resin to do the coatings on my tumblers. This resin hits the mark that I need it to. It dries quickly and very clear on the outside of my tumblers. There's no real tackiness left behind or yellowing. It does have a shorter working time than I'm used to, but this hasn't become a problem. It isn't terribly shorter, but it does harden pretty quickly so be ready with your heat gun.

Review for Bond Crafter Epoxy Resin Kit, clear crystal: I had a repair project that required embedding a small metal plate in a recessed nylon dish, and I'd struggled to come up with a solution that would be self-leveling, and precise enough in application to avoid spoiling the outside of the piece: This epoxy resin, paired with an oversized syringe and needle, proved to be the solution. Thin enough to force through the needle, and fill the void without a lot of struggle, and easy to embed the metal plate. Now I'll have the solution already in mind when I next run into a similar problem.

I have used this epoxy to fill in a gap on a live edge table top my husband made. The epoxy is easy to mix up, it pours out nice and smooth and has a nice clear glossy finish. I sanded off the excess epoxy because I wanted to leave my table top flat and natural; but it really did elevate the wood when it was poured on, I am planning to do another project to do a full coat of this epoxy over the wood as the final finish.

This is some of the best resin I’ve used. It is easy to use and sets up beautifully. It is crystal clear and I put a test piece in the window and even after 5 weeks no yellowing at all. It is not completely bubble free but keeping a toothpick handy took care of them. I think this resin is great and it is priced better than most comparable quality resins.