ALLEXTREME Non-Vibration Series Universal Spider Mobile Phone Holder Cradle Stand with 360 Degree Rotation and 2A USB Charging Port for Motorcycle Rear View Mirror Bike Mobile Holder (Black)

This is my second purchase first one lasted 6 years then rubber grips started falling apart, so changed it. The grip is strong and with limited and cared usage lasted this long. Charging point is an add-on so if you are on a long ride, just plug in your phone for charging too. Works nicely. Don't directly connect to battery terminals put it with key on power, will drain battery otherwise.

The media could not be loaded. It has strong iron clamps and claws to hold the phone but the metal clamp connecting the rubber bush is sooo loose. It was already mentioned by several other buyers in the comment. So when i ride, phone dances all the time and never holds in one place. I tried to fix it using quick fix glue but never worked. Also the rubber bush holding the phone comes out of its socket so easily and its never safe for the phone. The usb cable is about 1 meter long. To connect this to battery, it requires atleast 1.5 meters. I had to connect other wire to reach battery. Also the usb amperage is so high that phone gets disconnecting usb to make it safe from damage.

The mrp is 420 and I bought it at 429. This is not acceptable.It has a sturdy build quality. Did not check the charging function.The ball is rubberised, but has a gloss finish. So grip is not that good. The rubberisation is cracked in the ball. This will fail in some time and will make the product useless.I am returning this due to its flaw and overprice.

Very good product, highly recommend to everyone looking for a good mobile stand for their bike.Pros:1. Easy to use. Simply push the upper and lower arms together, put the phone in between at the right position, and release. With practice, you can do it in under 3 seconds.2. You don't ever have to worry about screw threads wearing out or creating trouble like they do in the other type of holder that grips your phone at the corners. If your phone has adjusted into the grip, it will stay there as long as the rubber covering does. The grip itself is amazing - I hit 150 kmph on my bike with the mobile in the holder, and there was absolutely no problem.3. Mirror mount means that handlebar space is free. The holder angle is hugely adjustable, much better than a handlebar mount. You can even set it at an angle that lets you use the phone camera for photos/videos of yourself or the road.4. Charger comes with an on/off switch of its own, so no more worries about miscreants draining your bike's battery. Just remember to switch it off yourself, else the bike battery could drain out. This is also easy because there is a light that stays on whenever the switch is on.Cons:1. The cover for the charging port is flimsy, and once became dislodged completely. It would have fallen off, but luckily it was trapped between the mobile and the metal arms, so I noticed it and reattached it. Be careful and don't let that happen to you.2. If you are used to the Dash charging of OnePlus phones, this charger will feel very slow. Of course, it works as long as your bike battery is working, but bear in mind that if your phone battery is critically low and you need to use it urgently, this may take a little longer than usual.3. The charger cable cannot be directly connected to the ignition (has to go to the battery instead.) What this means is that the charger can be used without the key even being in the ignition. Of course, the inbuilt switch deters a few miscreants, but beware all the same. Oh, you can also go to some mechanics and they will provide an adapter which makes the cable connect to the ignition and solve this problem.4. When riding on bad roads with lots of loose gravel, some tiny stone/sand particles could strike your phone and damage it. There is no protection for the side of the phone that faces the road. Plan accordingly.5. Mirror mounted - so if you want to remove mirrors (which is illegal BTW) you cannot use this unless you have some other way of attaching it.6. The attachment which fits into the mirror stalk is very weak (thin sheet metal) and will break in about 5 months, needing a replacement. If you get the u-mount, it's more sturdy.Overall, good product with some minor issues. 8.5/10

Received the exact holder as mentioned in picture by the seller. Connected it myself in my P220. It's was easy to connect since I already had spanner for connecting it to mirror holder. Bought this for Rs 500. Quality is good , very strong and can adjust its angle as per our requirement. For more safety from piston / engine heat, I attached a cover for the charger wire which goes all the way to the battery from front. Had to remove the petrol tank, seats and side covers for its assembling. There is a small switch for the charger inside a rubber bush cover. I think every bike should have such a holder . It holds very well without any shake. I am happy with the product. Thank you to Amazon and to the seller if u r reading this. Attaching few photos too.

It worked fine till now, except it felt cheaper than the older one it replaced. Its USB on-off was not there when I got it. I dont know if others have that button. my older one had it.Anyways, one day while opening it, it broke and came in hand. That entire claw is held by plastic piece under those 4 screws, and it breaks easily after few months. So, this is not at all a secure way of holding your phone to the bike. It will definitely break in any crash.

Useless products never buy thisMobile also doesn't fit properly and it come out while drivingVery low Quality product and price aso too high...

Amazing product