Linkstyle 2PCS Motorcycle Turn Signal Light, 12 LEDs Turn Signal Indicator Lamp, Amber White Front Handlebar End Light for 12V Scooter Sportster Cruiser Motorbike

I purchased 3 different bar-end turns signals from different companies. This set are the brightest and best for your buck. I even compared them with the high end motogadget pair and performance is equal. The high end just looks better do to the crystal cone shape otherwise I would have returned and kept these one on.I don’t know how long these last but for the short stint I used them, the worked phenomenal!

I bought 2 sets of these to install on my friends motorcycle in Mexico. I live part time in an area full of American and Canadian retireees in Mexico who are blind and oblivious to motorcyles riders. The more additional lights that can be seen, the better !!!I put one pair up near the end of handle bars so they could easily be see by oncoming and side traffic. I put the other pair near or under the seat and sides of the motorcycle so it could also be seen from side traffic and well as rear traffic.

The media could not be loaded. Honestly, I bought a similar model first thinking it would be brighter, but it was very dim, so I returned those and got these. Reviews on this, some stated that they weren't very bright. They are. At night, they're brilliant. During the brightest part of the day with the sun out, you can definitely see them, but given their size, they don't attract a lot of attention like they do at night, so you almost need to look for them. (And hopefully people are looking for turn signals at a stoplight!!) Honestly, I'm happy with them, and attaching videos.That said, the bushing that fits into the handlebar is rubber and has a nut to compress it to make a snugger fit. The interior of my bars was thick enough that I needed to sand down the bushing around it's circumference, but I got it to fit and they're nice and snug. The quality of materials seems really solid and I appreciated the fact that they designed it to fit on pretty much any bike/scooter.

Product is garbage now Iv used them many times before and they worked great. Bright white light bright orange turn ligh. Last two sets I ordered where junk one set wouldn’t work. White light bright orange fine but wouldn’t blink. If you disconnected white light orange would blink. They sent new ones I haven’t return the junk that cost me as much in gas to go to post office as they cost. The second both worked proper but one of them the turn singly light wasn’t bright. After testing them twice one stopped working on the turn signal like the first batch ordered and the second one the turn signal light looked like only 1/5 of the leds are working. What use to be a good product is now junk.

Easy to install, bright in daylight BUT the plastic black end caps just fall off.

I love these! They improve your visibility at a 360, are bright and functional which looks cool plus gives you more safety while riding at night, it’s a great product. Requires some elbow grease but when you’re done installing, it’ll be worth every penny and effort.Now, to install:You’ll need to connect black wire to turn signal ground, red wire to hot (blinker) corresponding signal side and white wire to key switch power (tap the white wire into any running light wire that turns on when you switch on the ignition) you’ll also need either an led relay flasher or a pair of resistors for this setup to properly function. Though, careful with the resistors, functional but get quite warm. Place them far from other wires or plastics, if possible mount them on metal.I’m currently using these on a Honda Ruckus / Metruck.

These lights work great mounted vertically on an ATV or UTV for turn signals. The lights are very bright and since they are visible for 360 degrees the placement is not critical. The lights can be seen by other vehicles as well as the operator. You can drill a hole the size of the threaded tube and install them with the rubber bushing on the back side. When the nut is tightened, it presses the rubber bushing against the flat surface and they are very secure. They can be mounted on the top of the fenders or or near the driver to provide additional visibility as shown in the photo. The only special requirement is the need for about 2 inches of clearance below the light. The wire for the white light is not connected in this instillation.

Those are the best cheap option for this model of turn lights. I had some cheap one made of plastic (ebay) and it was a shame, the bold itself was made of plastic and it broke while adjusting it. BUT THOSE! All metal! and the light is bright and clear! As written by other reviewer, the white light is brighter then yellow but hey...it works! I use them near the headlight, I'm too scared to put them on the handlebar: that's the first thing that hit the ground in case of accident.PROS:- METAL! not plastic.- Cables are long- Bright white lightCONS- The cables are really weaks, you can barely sold them without metling- I wish the yellow was as bright as the white