RJ45 Crimp Tool Pass Through Crimper for RJ45 Connectors / Cat6 Cat6a Cat5 Cat5e Connector Ethernet Crimper Tool with Mini Cable Stripper

This Brileine RJ45 crimp tool set works exactly as it should — clean crimps, easy pass-through cutting, and solid construction. The simplicity and speed it takes to complete a termination is super useful. The real standout is the CAT6 line tester, which is a must-have if you’re doing any DIY Ethernet installs. It made testing and verifying my runs quick and stress-free. Great value for a complete kit!

This kit had everything I needed to make my own Ethernet cables. The crimp tool feels solid and works well with both Cat5e and Cat6. The pass-through connectors make wiring easy and clean. The included cable tester is a nice bonus and works as expected. Great value for anyone setting up a home network or doing small installs.

I'm a retired network engineer and haven't done cabling for years. I had to use several tools and have someone at the other end to test or just pray I crimped the connector right. This tool and tester is a tremendous improvement. I was not only able to test jumpers but place part of the tester in my closet and test the other end at the room I was working in. The crimp tool is a fantastic combo of tools I had to use in the past such as knife to remove sleeve, old style crimp, and dykes to trim. It does it all. Now need a tool to separate the leads and keep them in the right order as you push them in the connector. Lol.

Came with everything! This is my first time using pass through and man, it's a game changer. I did a few terminations so far and it's so easy to use.The tester works - I intentionally messed up some terminations to test. It's pretty basic though - you'd probably want a more fancy tester if you're doing this serious!One thing that's annoying is the battery connector in the tester is not glued/screwed down to the case, and I couldn't get the battery to stay in place easily. It kept moving around when trying to use, causing it to lose power. One of the productimages in the packaging shows the connector loose, so I guess that's intentional. Maybe I'm using it wrong. I will add a photo when I can.Eventually I just stuck something inside to avoid the battery from moving around. Probably best to remove the battery if you're not going to be using the tester for a while. Reminder that you'll need to buy a 9v battery separately.Overall this kit is well worth the price.

Awesome tool, worked great . Good quality of tools I was impressed..

It has a learning curve, but once you get used to it its actually quite easy. The Main thing is matching the wires with where they are supposed to go. If you manually insert each wire into each of the connectors slots before putting it into the crimper its easier to see where they go. All in all, im happy with this crimper.

Because of new Internet service to my home which required moving the router to the garage, I needed to run an Ethernet cable approximately 30 ft. between floors. I purchased a spool of Cat-6 cable and this kit to terminate the cable. Having followed the instructions precisely, upon crimping/trimming the pass through connectors, the cable did not work. When plugged into the router and uplink port on the switch, the lights on the switch did not light up, hence no connection. I cut off and redid both ends about 4 times without success. Sometimes the tester would show position 1 not active, other times the tester showed that the cable was terminated ok. I decided that I must have damaged the wire when pulling it through the hole, so I cut a new section of cable and carefully fished it though. Repeated the process of cutting and re-doing the connectors, no success.Next, I purchased the Klein crimp tool (80024) and a pack of their plugs. First try, success. The lights on the switch lit up like a Christmas tree. I will occasionally go cheap on a tool that I plan to use very infrequently, but in this case, not recommended.

Crimper tool works great. The kit is good. Made an Ethernet plug in about 5 minutes. Tested Ethernet plug and wire. There were no faulty connections. I would recommend this tool kit.