Segway Navimow Traction Wheel, Cleated Wheel, Rough Terrain Kit, Robust Wheels for Muddy Terrain and Slopes for Navimow i Series, i105N, i110N

These off-road wheels should be the standard ones for the Navimow i110N. With the standard wheels the robotic mower could not make it across my lawn without slipping several times and getting stuck. The off-road wheels made it work without any hiccups.

These wheels should really replace the syandard wheels included in the Navimow. Although advertised for very sloped yards - we noticed it has helped with our slightly uneven yard.Error reductionWe have noticed significantly less stuck errors. Although our yard has a significant hill, the standard wheels handled the slope fine. The errors we were seeing was from slight ground divots or tree roots with the standard wheels. The errors went from several per mow session to once in a while.IssuesWith the switch, we are noticing yard where the wheels have ripped up the grass trying to get traction.CostThese wheels should be standard and not an extra cost or a different inital Navimow package so we arent stuck with the useless standard wheels.

TL; DR: Good all terrain tires, heavier, more grip for lawns that are lumpy or sloped. Should have been the standard wheels.Unless your lawn is perfectly level, and all connected, I would highly recommend these all terrain tires. They are heavier and have spikes, so the robot has more grip and can climb higher elevations. Excellent if your lawn is not perfectly level like mine.The one pain is putting on the hubcaps after you install them. They only install properly one way, after you align a small post that's on the inner side of the wheel. So you're gonna spend a good 5-10 mins trying as you blindly guess if the post is exactly where it needs to be while snapping the hubcap on.

You spend all this money on wheels with more grip and what you get is wheels that are about 2-3 times heavier (more load on the already weak mower) and don't grip so much better as to justify the expense. What they will do, however, is spin out on problem spots and dig a nice deep rut and destroy your sod in that spot at the same time. They do grip a bit better, but the spikes need to be twice as long to really work for sloped yards or other issues that require more than the standard tire that comes with.

This upgrade will help the Navimow to go up and down slope with no slipping even if the grass is wet

I’d echo other reviews that these should be the stock wheels. The original wheels are good for flat, dry grass, and that’s about it.If you have any slopes to your yard, mow in damp/wet conditions, or observe any wheel slipping on your lawn whatsoever, don’t even think twice about switching to these wheels. They are expensive and it’s annoying they aren’t the default, but I’d still buy them again. The difference is major.

Update 8/21/24-While they seemed to solve the problem, I eventually found myself having to get the mower unstuck repeatedly again. Save the money on these wheels and simply remove the bumper from the front of the mower. It is held on by four easily accessible, 3mm Allen-head screws, and once removed the mower has enough ground clearance to not dig its nose in at the slightest divot. This may make it easier for the mower to run over something like a hose (or foot), but considering the mower got stuck 3 out of 4 times before, I figure it's worth the slight risk.Original review:Four stars only because these should have been an option from the start. It's a bummer to have to pay an extra hundred bucks to replace the stock wheels, but ultimately it's worth it.Previously, the mower would get stuck about once a mow day. I've had these wheels on for over two weeks now and it hasn't been stuck once. Installation is simple. If you have a normal yard (not a putting green), these are basically a must.

Should just ship with all units