RokformMotorcycle Perch Mount, Fits Most Harley's, Metrics, and Indian Cruisers, Secures Cell Via RokLock and Built-in Magnet (Black)

Easy and quick install. Mount is solid and easily handles vibration from my 2004 Harley Electra glide. Highly recommend buying the vibration dampener. I bought the iPhone case and it locks my cell in tight with no concerns of my cell coming loose. Certainly worth the money if you ride and don't want to lose your phone or worry about damage from bumps or vibration

Installed this mount on my Road Glide Special. Like that it can be mounted on the existing parts. Easy installation. Adjustment needs some time to find the perfect position for the phone. It hold the phone rock solid and you can remove the phone easily. I like it and it allows me to easily use some of the apps like amazon music, maps or Quick to control my GoPro. Highly recommend this mount.

Works great on my Ultra Limited, nice quality item really strong magnet and very sturdy.

I bought this for my girlfriend for her birthday and she loves it!!! First, these are MUCH less expensive on Amazon than at the Harley-Davidson shops. Secondly, the security of the way the device connects to the phone gives piece of mind. The magnets are amazingly powerful and will hold tight by itself, the little cogged mount just makes it that much better.The install was VERY easy, everything necessary comes in the kit, including the allen wrenches (good for install, but won't help with removing the torx head bolts on Harleys) The entire set-up took about 3-5 minutes to put on the handlebars and adjust to her preference. The cogged bit was a little tight, but loosening the screw on the back helped with that and did not effect the stability or security of the device. The magnet will surprise you a bit when you first try mounting the phone to it, but once you figure out how to maneuver the thing, it works great.It will hold the phone fine at 70mph, and it is very steady. I would recommend this device to anyone.

I own two Harley Davidson motorcycles. One is a bagger and the other a soft tail. I wanted a phone mount that I felt comfortable that my iPhone 8+ would not be lost or damaged. The mounting of the case to the phone is every bit as good or better than my prior Otter box case. I also purchased the magnet that attaches to the vent louver so I can use it in my car. It truly works great! The system is excellent and my wife wants the same for her Samsung Galaxy phone. The phone cases and other accessories I give the Rokform products 5 stars and nothing less.When I received the first Rokform mount to install on my Electra Glide Ultra Limited I did have a mounting issue. Using the necessary Torx bit I removed the original two attaching bolts and the bracket that Harley Davidson secures the Master Cylinder and Front Brake assembly. The original Harley Davidson installed bolts when I checked protruded about 1/2” to 5/8” through the half bracket and there was a lot of thread to hold the assembly in place on the handlebar. See photo attached.I took the Rokform parts as supplied in the kit and assembled them in my hand using the longer furnished bolts from Rokform. What I found was the bolts supplied by Rokform in the kit extended through the half bracket with barely 3/16” of the bolt protruding and about 4 threads. The bolt used is a standard 1/4 x 20 thread, but utilizes a countersunk head and is finished with a black non-corrosive finish. See attached photos that I sent to Rokform. First photo shows how short the supplied bolts in the Rokform kit were. These if used would have eventually stripped out the attaching aluminum master cylinder and brake assembly leaving an expensive repair. The second picture shows the original bolt length as it was manufactured and how much longer the thread engagement is.I contacted Rokform whom responded back to me very quickly. I explained what I had found and advised I needed two longer bolts of the same thread only longer and with the same black finish that wouldn’t rust. The original person I spoke with forwarded me to a person at Rokform who was a technical person. He and I spoke and I sent in the same photos attached with a few additional. The issue is apparent! Bolts were simply too short. However I spent a week dealing with this guy as he went to the area Harley dealer to attempt to look at new bikes such as mine, and validate my complaint. Why did I bother sending photos?After a week I got tired of waiting and dealing with this guy. I called around to an area fastener supply and asked if they had such a bolt I needed in the correct length. As expected they did and I went there and purchased two.In a day or so I again got contacted by the guy at Rokform who told me he could not verify my issue on any new Harley at the dealership he went to there in California. At this point I was aggravated and told him that I got it resolved by taking my time and going and buying two bolts of the correct length. I also conveyed my disgust with him and this nearly two week long deal to get two longer bolts. He advised he would furnish me longer bolts and in a few days they arrived.In summary I really like the Rokform phone mount. So much so I bought another one for my Harley FatBoy. I haven’t yet installed it as I keep that bike in Florida. however when I do if such a bolt length issue occurs I’ve likely got bolts long enough to adequately secure it. I don’t understand why I had to prove to the guy and he had to validate my complaint. I figured that Rokform would simply furnish me without issues two longer bolts. I truly think for the price of this phone mount kit that multiple length fasteners should be furnished in the kit. I purchased a cup holder made by Kuryakyn that is a perch mount as well and mounts on the opposite handlebar assembly. It came with four sets of fasteners. Two were standard thread and two were metric thread. That cup holder kit was expensive just as this Rokform phone mount and Kuryakyn didn’t go cheap in furnishing you what you could possibly need to mount their product. As I stated I bought a second Rokform mount and will likely by a third as I plan to buy one for my Son to give to him for one of his Harleys. Rokform did come through on the customer service end finally. However I don’t understand why such a simple issue took so many phone calls and discussion. I believe that Rokform thinks that a installer won’t remove the half bracket to install their perch mount such as I did. They believe you will remove one original bolt and then loosely assemble the phone mount using their furnished hardware. I’m an ole guy and have learned to trust no one but God. I’m glad I checked the length of the bolts furnished as had I didn’t they could have pulled the threads out of the aluminum Harley Brake Master Cylinder assembly. I would have then been facing the cost of repair as Rokform wouldn’t for sure. I could have simply just went and gotten the bolts and fixed the issue and said nothing. However I wanted Rokform to know and be aware of the issue. This forum we have to help each other by advising others of possible product issues is excellent. This Rokform Phone mount is an excellent product no question! Just check to be sure the bolts you get to attach your Rokform perch mount design if that’s what you buy, are long enough to adaquately secure it as the original manufacturers bolts. Hope you felt this was worthwhile for you to read.

I absolutely love this case combined with the perch motorcycle mount. I was skeptical about the quality and bulkiness before I ordered, but now that I have it all setup I’m super impressed with the quality and low profile design. Seems very very secure and tough. The quad lock mechanism is billet aluminum not plastic, so it won’t wear out. It’s the best case and mount system I’ve ever had for sure. Highly recommend it!

I was very skeptical on ordering this mount, mainly due to the cost and that it's sometimes hard to tell the quality from the video and the advertisement on Amazon. The mount could not have been any easier, I have a 2008, Black, Harley Davidson, Ultra Classic. The mount to the left (Clutch) housing was very simple. The mount comes with two types of spacers; I chose the shorter one. I removed the stock bolts and using the bolts and shorter spacers and a little blue locktite the mount is installed. I purchased the iPhone Rokform case and mounted it so the phone is horizontal. Brother, it not only looks cool it works. That phone is on there! Also there is a magnet in the case and mount that helps hold it together.

Works great! Holds my phone securely even at moderate cruising speeds.