VEVOR Bucket Tooth Bar, 53'', Heavy Duty Tractor Bucket Teeth Bar for Sub-Compact Tractor Loader, 4560 lbs Load-Bearing Capacity, Fits Bucket Cutting Edges Sized 1/2" or Less with No Drilling Required

This bucket tooth bar is of excellent quality. It is very heavy duty and has the option to clamp on or bolt on your bucket. It comes with the set screws for clamping and the bolts for bolting it on. It fit my bucket very nicely with a little room to spare. If you are digging in really hard clay or tree roots I would advise putting at least two bolts in it, in addition to clamping it down, otherwise it will get hung up in roots, rocks, etc., and get pulled off the loader. I learned this the hard way. This is a product I would highly recommend. It has increased my loader digging efficiency by four or five times more than digging with just the loader alone. Also, this was shipped to me even faster than promised.

These are great heavy duty bucket teeth. You will know they are heavy duty when you go to move the package. I am sure the holes match some buckets but not mine. I used the set screws and it is very secured. Installed quick by myself no problems. Some reason it would not let me give it 5 stars but I would have.

Well made. Had no trouble with attachment or slippage. Excellent results and increased digging ability with my John Deere 1025r. Great value

Ok, this fit my Bobcat 7753! Here's the deal though, you have to make some adjustments we had to use a cutting wheel and a grinder to take 3/8 of an inch off each end. Then we had to drill holes to line up some bolts. Well voilà!!!! It works like a charm, and about $900.00 cheaper than a bucket with teeth. If you don't mind a little extra work, buy this! Great value!

It's heavy! Much heavier than expected and it's a quick mount, stays tight and digs. For the price you can't complain.

Good quality, seems very strong, should do the job.

Was ok didn't fit my big loader had to cut off teeth and weld them on

Fits my tractor bucket perfectly. I drive a John Deere 3320 with a 300X loader with a 5' bucket. This set of "teeth" fit perfectly onto the bucket with a bit of room to spare on each end. Comes with both a complete set of bolts with lock nuts and the option of using the screw down Allen head screws. I fitted the new unit this morning. For right now, I've opted for using the Allen head screws to hold the unit onto the bucket. Tightened each using my cordless impact and the result was a very firm connection. Haven't used it yet to dig into my rocky, clay type soil, but I have high confidence it will work much better than just the regular bucket edge. The teeth on this unit look very similar in construction to those on my JD backhoe implement. Lastly this unit is heavy. It's built to take some serious usage. Don't know why I waited so long to get one of these considering how hostile the soil is on my property.

Very good quality, I have used it on my TYM 254 bucket and dug out many holes and lifted the asphalt of my driveway. Very heavy duty, thick steel, I couldn't break it even if tried. I like the ability to take it off very quickly (in about 10 minutes).

unit is very heavy duty. unfortunatly, the 48" did not line up to my 53" Kubota bucket. Unit was returned with no hassle or cost. Very good service.

I bought this hoping it would "add some teeth" to my ancient bobcat 631- it works a treat. I was a bit concerned when I unpacked it and found there were both M16 grub screws on each tooth, and nuts and bolts for fixing the bar itself to the bucket (which would have required drilling through the bucket in many places), the grub screws clamp down well on the bucket lip, and I presume the nuts and bolts are for a belt and braces approach. The Instructions are pretty useless, just saying " Use a tool to lock all nuts and bolts into place" i used an 8mm hex attached to a torque wrench and tightened the grubscrews to 30 ft lbs. The spec says that the bar fits buckets up to 1/2" thick, which again was a worry since the cutting edge on my bucket is more like 5/8" (16mm) thick- I'm pretty sure that this bar would clamp on to a 3/4" thick bucket from measuring the gap. It has greatly imptoved the ability to scrape up firm ground as well as cut into piles of soil mixed with brash and stones

Happy with purchase.

Heavy and good quality, fits my mini skid steer bucket as well. I just ordered it wider and cut it to length, that gave me a full bucket wide version and a small 2 tooth grabber version. I like it.