FLASHFORGE Adventurer 5M Pro Nozzle, 0.8mm Hardened, 280℃ High Flow 32mm³/s for Stable High-Speed Printing, Compatible with Adventurer 5M Hotend, Perfect for High-Strength Filaments

Works very well and the installation was really easy. It is an original part and I am sure it will last for a long time.

This actually solved my problem of my printer shutting down whenever the nozzle was supposed to begin heating up. A weird problem with no error messages. Arrived quickly, easy to install. I just hope this is not a recurring problem with this part, because it is on the expensive side.

This is a huge plus. This is my first tip replacement and it is made from hardened steel. This is a huge upgrade from the brass tip that came with the machine! I’ve learned a few Things since I had the first nozzle clog. That is that each nozzle should only work with one type of material. I started with PLA and switched back and forth with PETG. That may have contributed to my first nozzle failing. Now I have decided to stick with only PETG and to only buy a hardened steel Tip when I change sizes or materials. Each one will be boxed in a container marked with size and material type. But so far this is a great product!

I got this to make small fine print items with my AD5M. It works great. It increases the print time by almost double sometimes but when the item is done, I don't have to worry about those little imperfections I'd usually see with my 0.4mm nozzle. Feels good and durable, just like the original. Good price I guess. Easy to remove and install, just like the one that comes factory. Easy to clean and store. Love it. Will probably buy the bigger nozzles next.

Perfect fit, you can't go wrong with name brand items.

I got the Adventure 5M as a birthday/Christmas present in early November 2024.Its now 01/07/25, I have replaced my nozzle 3 times already, so I have gone through 4 nozzles in total including the one that came with the printer and each nozzle had the same issues. Which is insane for only having the printer for a little over 2 months. At first I thought it HAD to be user error because there was no way the same issue would keep happening to each nozzle and not be connected to me but I haven't done anything that could cause these nozzles to fail.It will print great for a little while, then it seems like its clogged. I do the steps to unclog that Flashforge said to do via their website and Youtube page but it doesn't change anything. I will repeat the steps multiple times to the point that nothing will come out, then I give up and buy a replacement when nothing changes. I have only bought this exact one from this company, so its the company brand nozzles. I follow temp and speed requirements on all prints, I let the printer pull the filament I don't force the filament in, I got the PLA filament as it was suggested for beginners and have the printer set for PLA requirements. Today I went to order another brand new nozzle and a notice pop up stated "this is a highly returned item, please check the reviews", I finally read these reviews and looked at Reddit, I seen way too many people have the same issues I'm having, and I now know it cant be user error.I just rebought this nozzle on 12/29/24 and got it on 1/3/25 to keep as back up. Same day I got my back up, the one in my printer did the same as all the others. Still tried to unclog it, issue still not resolved, replaced it the nozzle, printed fine 1/3/25 and 1/4/25 doing simple prints no longer than an hour, didnt print anything 1/5/24, started a very simple print 1/6/24 that was only 24 minutes long, and BAM same issue within 5 minutes. Still tried to unclog it, but after multiple attempts its still not working.So now I have 5 nozzles in total I have gone through, all Flashforge brand nozzles that were brand new. I have tried so many different ways to avoid this but no matter what I do, it doesnt change. I cant afford to keep spending $40 to buy a new nozzle when it fails within 3/4 days. I even took apart the nozzle I removed on 1/3/25 to see where the clog was and couldn't find anything. I'm very disappointment with these nozzles and I'm starting to become very disappointed in this printer and this company.I'm not sure what I'm going to do at this point or what I should even do.

Works ok!

printer was throwing a "E0015: extruder temp error" if none of your wires in the housing look bad id suggest this part first. plugged rite in. (also even with no nozzle in machine it will throw the E0015 error. problemo solved had 300+ print hours on previous nozzle but was using some weird gold black filament that maybe did it in. so happy haha