TripleAliners Truck Mat Compatible with 2017-2026 Ford Super Duty F250/F350/F450 6.75FT Accessories, Truck Bed Mat Heavy Duty Custom Fit All Weather Protection TPE Pickup Liner

Fits our 2026 Chevrolet 1500 short bed perfectly. Lays out like like it was sprayed on. It was easy to install . The quality, thickness and looks are great. It stands up to heavy loads without splitting or cracking.

⸻ I’m really impressed with this truck bed cover. The quality is very solid, especially for the price. After leaving it out in the sun for a while, it softened up and fit perfectly. Once installed, it looks great and feels durable. Definitely a great value for the money. 10/10 purchase!

This truck bed mat fit my Ram perfectly and was a great upgrade for protecting the bed. It lays flat and lines up well with the bed contours, so it looks almost factory once it’s installed. The material feels thick and durable, and the TPE construction gives it a good balance of flexibility and toughness for everyday use. The textured surface helps keep things from sliding around in the bed, which is really helpful when hauling tools or gear. It also seems like it will hold up well to dirt, mud, and normal wear, and it’s easy to pull out and clean if needed. Installation was simple—just drop it in and it’s good to go. If you have a Ram with the 5.7-foot bed, this is a solid, heavy-duty mat that protects the bed and keeps cargo from sliding around. Just note that it’s designed for trucks without Rambox storage, so make sure your truck matches that configuration.

Very sturdy and scratch and dirt resistant. There’s no odor or need for trimming. This was a good buy.

Have had mat for 10 months and purchased with own money. Have a Tacoma with a plastic bed. Did not have many warm days for mat to form to bed quickly but when it did it fit like a glove. Have hauled tools, rock, wood, mulch and bikes without issue. mat has help up nicely. Before I got the mat this truck bed was slippery even when dry. Now it’s as safe to work in as any truck bed. Recently I left the tailgate down on accident and traveled to work with a loose bike at the end of the truck bed. The bike did not move much at all. I travel on some rough roads and this shows the grip this mat still has. Also if you need to clean it just pull it out and clean. This mat is light weight and really locks back into place when done. Only draw back is price and I don’t know if I would go down the highway in high winds without something on top of mat to keep it from blowing out.

This is a great product, I was skeptical of the material and ability to lay down. But the product material is great, thicker than expected and after two days has completely flattened out. The lip around the bed is a perfect fit, and I highly recommend this product. I’ve always had rubber liners in the past, but they never fit like this one does.

Fits like a glove. I have a spray in liner, but those will wear down over time. This is extra protection and looks great. I use a tonneau cover as well. I cannot say how bed liner would hold up to highway winds. If your plan is to run open, I’d get some heavy duty Velcro strips.

Fits 2026 ZR2 perfectly. Will need to cut holes for gooseneck hitch and hooks. Has good thickness. Good value. Is held in place and fits underneath the bed tie down hooks. Was delivered folded up in large box. I unfolded it, left it in the sun for 30 minuets. Looked flat enough to install. Easy to install.

Se lo puse a una Sierra Denali doblé cabina 2018 y le quedó perfecto, todos los cortes están en el lugar precisó

Ajusta muy buen, luce bien, protege bien, un poco elevado el costo ya con el envió pero conforme con el producto.

I just installed this in my 2022 P4X and if anyone is considering a bed liner, I definitely recommend this one. It arrived well packaged, wrapped in plastic in a cardboard box. That was a good thing since the courier apparently tried to destroy the box but the liner was 100% ok. Shipping was ridiculously fast too, I ordered it on Monday morning and it arrived on Wednesday afternoon. Considering this was shipped out of the US and I'm in Canada, that's impressive. It comes folded in the box but after laying it out flat for a day or so you can barely even tell it was ever folded. Mine still has a small amount of distortion in the center but I'm sure that will flatten out over the next few days as the material relaxes, it's barely been out of the box for 24hrs right now and it's not very warm here. Installation was a non-event. I spent 5 or 10 minutes cleaning out the bed to ensure I didn't trap any debris under it and then it just dropped into place with no effort. I'm really impressed with the fit. The ridges are perfectly designed to nest into the corresponding ridges in the truck and sits very nicely in the bed. It's well contoured at all the corners etc, comes up the wall about 1.5in and even captures the small lip at the rear of the box. It has lines molded across the width of it that nest into the truck and I think that, along all the other molded details should prevent it from moving around, even with the tailgate down. It doesn't interfere with the drain lines from my tonneau cover and I noticed that it's made with a rolled lip that should prevent the edges from curling in or losing their shape over time, that's a nice touch. The material (TPE) is nicely molded and seems pretty durable, TPE's are typically oil/acid resistant so that's a bonus when carrying gas cans, oil jugs, greasy parts etc. And when it came out of the packaging there was none of the chemical stink that's so common with many plastics. People have already been asking why I would put something like this in my truck since I have the spray-in liner and for me, there's a few reasons. Putting skis in on the spray-in liner is like sliding them across sandpaper and it's really hard on the them so this will protect my toys in that way, with a tonneau cover on it's really annoying when boxes and stuff slide forward and this should help to keep things in place nicely, and anything I spill back there will be much easier to clean up. I'd give this a solid 5/5.

It is a great idea and will work much better with a few improvements. Most of the holes didn't line up with the factory screws and needed to be drilled. The mat needs to be a bit wider as it doesn't fit into the design of the tailgate very well, you can get one side to fit perfectly only to find the other side is short by about 1/2" and because it doesn't sit down into the lines stamped in the metal the liner is raised up slightly on one side. The material is nice and I'm sure it will be durable, it just needs to fit better. There is no need to tape it down if you are reusing the screws that are already in your tailgate.

With a bit of trimming, fits a 2025 tacoma hybrid with power liftgate. I took 1/8” off the top and bottom edge with a carpet knife. A bit sloppy on the top edge, but doesn’t seem to interfere with the tonneau. UPDATE: it is getting cold now, so the rubber ‘ribs’ on the tonneau aren’t as flexible, causing the gate to get stuck. I trimmed off another 1/4” and it’s all good now. Total trim off the top edge was 3/8” The sloppy top edge could be fixed by making the 'divots' smaller, as the edge rides up on the edge of OEM lift gate cover, forcing it to pop up a bit. Communicated my observations with the seller. Hopefully, they make a bit of an adjustment to make it a PERFECT fit. It saves having to replace the Toyota OEM lift gate cover at a cost of $350 CDN.