ECHOGEAR 3 Monitor Desk Stand for Screens Up to 27" - Triple Desk Mount with Lock Down Clamp to Eliminate Screen Wobble - Adjust Tilt, Orientation & Swivel of Each Monitor Without Tools

I've wanted a triple monitor setup for years, I finally pulled the trigger when Dell released their S2721DGF and was in need of a stand for them. I've got an Uplift standing desk, so wall mounting wasn't an option and everything I looked at online just seemed cheaply made and looked like crap too. Then I found this one, had a decent picture with the monitors sitting nice and level and looked like it was pretty robust in design. I was skeptical of the $150 price tag though, usually good monitor mounts run hundreds of dollars (We have multiple triple monitor mounts at work that were almost 1k lol). When I first took it out of the package I was impressed by how much everything weighted and how solid it felt. The vertical tube wall thickness is 4mm! It was easy to assemble for the most part, getting the monitors aligned perfectly took some time, which I was expecting because I'm OCD about that kind of stuff, lol. There are a few reviews on here talking about how it isn't sturdy and showing the screens panning back and forth, they do not have the hardware on the clamp tight enough! You really need a ratchet with a 4mm allen socket to get it tight enough but it is ROCK SOLID when you get tight! I did modify it slightly because the vertical tube was a bit long for how low I have my monitors mounted, so I cut about 11" off of it so it only sticks up past the horizontal clamp about an inch and not above the monitors like it did when I first assembled it. I also used a through bolt to secure it to the desk instead of the clamp, a standard grade 8 3/8 bolt with a fender washer worked perfectly! Overall, I'm super impressed with this mount, couldn't be happier! 10/10

So if you've ever spent significant time trying to align your multi-monitor setup, and you're looking for a better solution, this is as good as it gets. The design of this product is the best I've seen, and it takes several of the variables out of the alignment challenge. The horizontal bar is one piece of sturdy metal. So instead of the hinge-sag on typical monitor stands, you have a perfectly-level horizontal mounting surface. Then, the VESA mounts connected to that are done in an innovative way. The movement is much smoother than typical monitor stands and the tightening function/method is such that it doesn't change the alignment, like a typical allen wrench tightening does--so you take that variable out of the equation. Is it still difficult to align the monitors? Eh. It's not instant-easy and it's not perfect. Right now I'm about 2mm off on each, but it's consistent. I think if I mess with the screws on the center monitor VESA I can get it even. But it's definitely as good as it gets for what's available in the market. I've spent a Saturday getting two 3-monitor setups level before. This is MUCH easier/more consistent than anything else I've used. The mount for the base is a single-bolt, wide tightening plate, which is better than the typical two-bolt setup (where as you tighten one, it effectively loosens the other). My only complaint is that you can't go through the "pipe" to route cables... I'm solving this by zip-tying the cables together and then zip-tying the bundle to the back of the pipe to hide it. That might bother people if a perfectly "clean" cable install from behind the monitors down (vertical to the desk) is important. In theory you could drill a large hole in the rear base of the pipe and then route the cables over and through/down (it's an empty pipe with an open top, but with thick walls, maybe 3mm, so it would take a serious drill bit... could maybe be done with a Dremel and some time/discs/burrs). Pipe height is tallest I've seen... I'm 6'2" and have a standing desk, and I can get the vertical center of the screens nearly to eye level. The reviews that say this won't work on 27 inch monitors might be for an older/incorrect product. I DO have three 27 inch monitors installed and there was ~2 inches of gap between the three with everything spaced out as wide as it would go before I adjusted them to touching. Finally, with the monitors touching edges, the angle of the outer two monitors is ideal (for me, at least). It's the same as what I had done when I had fully-independent adjustment arms. Bottom line on this item is that if you like having your monitors vertically-aligned, this is the best solution I've found/seen/tried, and I've tried a lot. I'm going to phase this in at my office for everyone's monitor stands. Everyone else with various other typical (though expensive) monitor stands has given up--it's misaligned monitors throughout the office and it looks bad and I think it's bad for morale on some level. This stand fixes the problem.

This was the 3rd mount I bought -- and I am soooo glad I finally paid a bit more - because this one is PERFECT. I was very apprehensive about clamping the mount to my desk -- but this mount is great. Big, thick, sturdy, STEEL. The bar was unexpectedly long - because it came as a Bar - go figure !!!! not a jointed flimsy series of bars -- but ONE LONG PIECE OF STEEL !!! It was so easy to set up - and the monitors can be HUNG on the top two screws because the mounts have U-channels , not holes - ! Long story - short - you clamp the base - done you add two screws to the top of each monitor - done you space the mounts apart - which is EASY as they slide along the bar - the ONE PIECE STEEL bar (remember?) you hang each monitor up - done - you add the other screws and tighten - done then you walk to the front and adjust them relative to the others - done you tighten the mount knobs - done - Done - DONE you enjoy THE CORRECT PRODUCT YOU'VE BEEN LOOKING FOR ! :-) Done

C'est un très bon achat. Un bras central solide. La disposition des écrans est réglables grâce aux maintiens pivotants. Mon écran central n'est pas le même et n'a pas la même taille que les 2 autres donc j'ai un léger écart. Le pied central est rotatif. Il faut faire attention car il faut de la profondeur sur le bureau. Le mien fait 80 cm de profondeur et je trouve que c'est le minimum sinon les écrans seront trop prêts de vos yeux. Le bureau doit être assez long, le mien fait 180cm. Pour moi le prix est justifié.

For a £150 price tag I was not expecting anything good, but I had searched around and wasn't finding anything that could offer to hold 3x ASUS VP279HE Eye Care Monitor - 27 Inch, without needing a small mortgage for a custom made one. So I thought I'd try it. Well my doubts were unfounded! It fits the 3 monitors perfectly with a little extra room which would accommodate a bit more of a bezel. The metal is thick and quality. The instructions contained some humor and were easy to follow. It would have only been easier to get this setup if they had come round and done it for me. Adjustments are easy to make without tools. I wish I had just bought this sooner rather than wasting time looking elsewhere.

Arrived in two business days to Ottawa, Ontario (shipped from Concord, Ontario). Everything is very heavy duty and feels very quality. I would definitely recommend installing this with a friend as it is a lot of work and heavy lifting at times. I did it myself only because I had to. The only thing that seems like it's going to be annoying is how finicky the stand can be (although I wouldn't be surprised if I figure out a fix for this). I've only owned the stand for about two hours, but because everything can move in every-which direction (because it is incredibly customizable), it is difficult to get all the monitors perfectly lined up as you have to align them on 3-axis. Champagne problems I suppose. Will post picture if I get to it later, but I do rest assured this is better than models with the articulating arms (and droopage, especially after prolonged use).

Para empezar, aviso para navegantes: es un paquete GRANDE y PESADO, con lo cual si te toca alguna de las preciadas agencias de transportes que no aceptan depositarlo en drop points, olvidate de salir de casa en todo el proceso de entrega. Una vez acabada la advertencia pasemos a sus puntos fuertes: - Estética: El tener tres monitores en una sola peana lo hace precioso de ver. Elegante y moderno. - Robustez: El puntal del que se sostienen los monitores transmite mucha seguridad. - Versatilidad: Puedes poner los monitores como te de la gana, todos verticales, todos horizontales o combinar. - Calidad: Los materiales muy bien escogidos, y si hay que ponerle un pero, las pinzas de sujeción de los cables yo las hubiera puesto elásticas o con juego. Al ser rígidas en mi caso llegó una rota. Por último un par de consejos a la hora de decidir si hacerte con uno de estos soportes: - Ojo la mesa en la que lo instalas puesto que la fuerza que ejerce es grande. (ojo no olvidarse de poner los topes de goma dentro de la garra o marcaréis la mesa). - Revisar bien el paquete al llegar. Me explico: carece de asa y en mi caso le hicieron un agujero al paquete para agarrarlo. Por suerte no faltava nada. Gran soporte, lo recomiendo encarecidamente.

Strong monitor stand, very satisfied, good product.