lormuzi Propane Forge Gas Welding Kits Double Door (Stainless Steel) Double Burner Portable Artist Hobby Knife Making Tool Making Farrier Blacksmith

Thanks

Wow, where to start. Awful build standard,Firstly, because of design flaws the steel shell becomes super hot.Secondly, insulation provided is poor, arrived sqaushed so could rigidise properly.Third, burner sockets where not as shown in details, ceramic inserts which are brittle replace the screws used to lock burners in place.Fourth, door design means hinges are going to seized and burn off.Fifth, the burners are not safe, the jet hole on each is way too big, there's no choke so it's 100% power all at once, thinks a rocket or flamethrower.Sixth, the regulator is dangerous and not fit for purposeSeventh, despite having a need to be coaoted in refractory and stating this on the ad, the instructions say its not need, total nonsense. This need rigidiser and refractory cementing.Eighth, hose connections will fail very quickly, too rigid and cheap connectors.Ninth, no mechanism to reduce gas flow.Conclusion, if this forge had a few more adjustments, a little larger, better components and burners it would be excellent, but sadly its performance is dangerous and poor

Brilliant table top forg ,highly recommended

Very solid and sturdy. Easy to assemble and use. Item arrived very well packed, so excellent start, perfect size and more important top quality looks and feels great , for the price can’t fault it, 10 out of 10 from me very happy indeed and would purchase again 👍

Got one of these as a gift. Fired it up for the first time today. The regulator is not adjustable and releases so much gas that my first ignition caused a massive fireball which burned my face, singed my hair and scared the life out of me. When I'd calmed down a bit I opened the valve on the tank a tiny bit and stood well to one side to light it. It was still quite a fireball. Heated up quickly, easy to use once lit but not easy to control the flame from the bottle valve. I shall be getting an adjustable regulator for it and probably only using one of the two burners most of the time.

I recently acquired this Forge and I've been thoroughly impressed with its performance. The durable double door design is great and allowed for a quicker heating of steel by closing both doors, thus saving time and propane. The heavy duty stainless steel construction, along with plasma surface treatment, ensures durability making it ideal for high temperature environments. With the double burner setup, I've noticed a significant improvement in heating consistency, addressing common issues of uneven heating in other forges. Moreover, the extremely high thermal insulation provided by the ceramic fiber blanket allows for quick heating and temperature maintenance. However, one drawback is the non adjustable regulator, but adding an adjustable one provides a depth of control over the flame, enhancing overall usability.

This came with very poor ventilation in the firebox. I had to purchase another regulator because the one supplied was not for calor bottles despite the ad saying they were. The supply tubes were such a bad fit that flames shot out of the entry point and shot up to the plastic pipe. This caused a problem with the flaming that seemed to pop and ignite at will. The whole system was completely unsafe. I had to make some adaptations with fire rope and a new regulator. I complained to the seller and got no answer. I complained to Amazon and that was a waste of time. Foreign call centre working from a script. Basically if you dont want your workshop garage burnt down buy a furness frome someone else. This is my first ever complaint, it will be my last. Amazon only offer a return policy. No way can you get the ting resolved with a replacement correct regulator. DO NOT PURCHASE THIS DEATH TRAP.