UV Resin 500g -Bulk Upgraded Crystal Clear Hard UV Fast Curing Epoxy Resin Supplies for Craft Jewelry Making

The media could not be loaded. I bought this UV epoxy to do a fake sun tea with ice. It's a reasonable price but don't expect it to dry super fast. It took 4 hours in the sun of 98° to completely cure. I placed it on a hot stepping stone to cure completely the 4 hours. I added the pigment color that's made for epoxy to get my tea shade I wanted to achieve. I have used another UV epoxy brand and it was cured in 8 minutes in the sun. If you need it or expect it to dry fast it doesn't. Expect LONGER! I did pour the 500g all in the glass. It may of took longer because of how much all at once was used. It has no oder, which was good. It poured out of the bottle by making a pin hole in the aluminum seal on top. It mixed well with the pigment also. I bought the pigment here on Amazon. It was epoxy resin pigment 12 colors for $7.99. The ERCorArt Store has it for sale. It mixed well with this epoxy. It's good epoxy if your patient to wait for dry time or use a super high UV light. I don't see a UV light drying it fast. The sun works best and waiting 3-4 hours. Would I buy it again. Yes, because I now know what to expect on dry time.👍

I recently tried this UV resin and I am very impressed with its performance. Initially, I bought the smaller amount to test it out, and I was so pleased that I decided to purchase the larger size.This resin does not bubble and has a very mild odor, which is a significant plus compared to other resins I’ve used. It is super clear and has never given me any issues with under-curing. It cures perfectly under my 48W UV nail lamp every time.I would highly recommend this product to anyone looking for a high-quality UV resin. I will definitely be buying it again!

This was a great resin for the price. I didn’t experience any problems and everything cured very well.

Awesome product! Very easy to use. Lots of work time. Will not harden until you cure it with UV lamp or sunlight. I work with it in a limited sunlight room. I have used it to 1) pour into molds for jewelry. (You have to cure it on 1 side then flip the mold and cure it on the other. Do NOT recommend for making Jewely with a solid back like a metal tray etc. since you cannot cure the back side with UV so it will not cure. However, works great to seal the top of the piece of jewelry, to dome it, or add top embellishments. You CAN use it in trays, etc. IF you pour and cure it in LAYERS!! Then it works GREAT!) 2) Used it to seal both vertical and horizontal planes of dioramas. (Is a bit this so I use a paintbrush in thin layers. Works great!) Super clear with very few bubbles, VERY LOW ODOR(I have asthma, and this causes me no issues), suer fast shipping and great price|! Overall, an awesome product at a great value!

Was bought for mom because was at a good price and it's ratings but she's not crazy about this brand... 1st no nozzle tip comes with the 500 g size so if working with small mold is hard to control [yet instructions say for 1st use to attach nozzle tip] and must use a silicone cup with spout which also means more likely to get more bubbles than if using a nozzle tip. 2nd everything she cured stayed sticky on back and sides no matter how many times she turned and flipped the pieces... only additive was very small amt of glitter and cured in layers as well. Other resin she usually uses rarely had an issue with stickiness. She even scanned the code and followed those suggestions most of which she already knew from working with uv resin.... the only new suggestion for her was the one about putting it in water and curing again to remove stickiness. Lastly.... will stick with usual resin brand....

This uv resin dries shiny and clear! I’ve tried a few brands that had a dull appearance but this one always dries clear and perfect!

El secado es súper rápido

Firstly, this resin has a lot of positive aspects. It is lightweight, the bubbles are very easy to get rid of, the viscosity is low, and it does not seem to yellow. It would be perfect for me if not for one thing: the smell.I am not someone who takes resin lightly. I use a strong respirator, gloves, and all other safety precautions when using resin. While I cannot smell it through my respirator, I *can* smell it *strongly* when I am finished with my project. Everything I have made with this resin takes days to stop putting off an awful smell, and basically needs a bath in rubbing alcohol, no matter for how long I cure them. None of my molds have stopped smelling like noxious fumes, either, and no amount of washing or alcohol soaks has taken the awful smell away.This is a very nice resin with a lot of upsides, but the odor is completely inexcusable, and I will not be buying again.