Genie Security Accessory Intellicode Wireless Keypad, White (37224R)

The 800 number is shown as 1-800-35-GENE. This isn't even a complete number. It's I-800-35GENIEThe instructions packed with the unit are incorrect if you have an Intellicode 1 type door opener!!!! I have an opener that is just a few years old and is an "intellicode 1" system. I knew this and used the correct steps starting at step 1. However, there is a clearing step that must be completed that is in a shaded area above the instructions for setting the code. That doesn't work and so the customer service guy walked me through the proper steps, and it worked instantly. I had him email me the correct version of the instructions. It's a shame that this company risks getting a bad reputation over something so simple as packaging the proper instructions. If you have an intellicode 1 door opener, here is how you have to program the unit:Press and hold PROGRAM. While holding program, press the up/down key for 5 seconds. Release.Once this is done, follow the instructions in the shaded box that say "To Operate Intellicode 1 operators". Then you can program your PIN.Good luck.

Illuminated keys. Programable to operate up to 3 different garage doors independently.

My opener is a old Genie Intellicode, Model: IMS 1000. Purchased a Keypad via Amazon several years ago marketed by Overhead Door, which is the same as the Genie model. It suddenly stopped working; changing the battery did nothing. I ordered the Genie 37224R Keypad. Read the instructions, which are very clear and easy to understand. To get the new Keypad working only took as long as it took to enter my PIN in the Keypad (like a 4 step process); remove the plastic cover on the front of the opener that cover the bulbs; press the memory button on the opener; and, enter the PIN in the Keypad and press the Up/Down button. In total it took me about 30 minutes, and some of that time was doing a Google search and printing the owner's manual for my old Intellicode model to insure I was programming everything properly.This Keypad seems to require you to depress and hold the Up/Down button (after entering the PIN) for a second to transmit the signal and actuate the opener. Don't recall the old Keypad requiring holding the Up/Down key. Otherwise, it works perfectly.

easy to install and use

This works as expected and seems reasonably durable. This is a 'Genie' keypad; I have an Overhead Door opener (2026 = Legacy 800). Genie and OD seem to be same company but they use different numbers. The OD website shows this keypad but with different model letters. So, yes, this works with Model 2026 of Overhead Door. The programming instructions included and those pasted in the keypad cover were the same, simple enough for 1 door (I don't have multiple door), and worked. The instructions on the OD website were slightly different; I did not follow those. I think Genie-OD should get its act together on model designations. My opener says '2026' but I had to do a search to find out 2026 was Legacy 800. The screws (Phillips) included are very long and not particularly tough steel. You will need an electric drill to make holes before you try to screw them in, else you will strip the Phillips heads.

This is my second purchase. I had the first opener since 2013 and it worked great until it finally gave out. I feel like I got my money's worth from it. I was happy it was still available. If you have any issues with the instructions just look for videos on Youtube.

I really wanted to give this item a 5-star review. It works great and was pretty easy to install. The only reason for the 4 stars is that I have an older model of this garage door opener and I think that that older model is superior. It seems that the quality has dropped a bit. The older model I have uses a 9-volt battery and this one uses two AAs. The older one was also much sturdier. If I could have found a Genie Intellicode that was the same I would prefer the older model. All that said it works fine and has been hassle free since installation.

I looked carefully on amazon for a wireless keypad for my Overhead Door garage opener system. I wanted a keypad that used AAA batteries - not 9V. The info on Amazon for this keypad was great. I installed it this afternoon on my stucco exterior. One issue - the stucco required a masonry bit for the drilling, so one trip to Lowes for a masonry bit set. I was unable to use the screws provided, because I couldn't drill a deep enough pilot hole with the masonry bit. I may have run into a steel beam on my garage frame and broke two carbide coated bits trying to drill through the beam. I found a couple of shorter screws that were just right for the depth of hole I got with the masonry bit.Programming the PIN code - I thought I followed the directions, but I kept pressing program after entering the initial PIN. You only need to press Program to program the keypad. After programming just enter the PIN, then press the open/close button :)

Great product works like a charm. Will buy it again if I need another.

Programing was easy , worked well

Works great on my genie 1022 garage door opener.

Instructions were clear. Had no trouble synch'ing keypad to existing Genie door opener. Just installed, so too early to comment on how it will perform over time.

Works very well