Art3d 10-Sheet Peel and Stick Subway Backsplash, 12 in. x 12in. Black Marble Design

1- This product is SO EASY to apply. I used 3M adhesive spray (74 I think?) to ensure it would stick forever, we have lightly textured walls, I sanded them first, but they still had a little bit of texture. So far, no issues with peeling, and I'm not anticipating any. 2- It's really pretty! There's a slight metallic sheen to the light gray, which looks super nice. We ordered some samples of tile before we decided to do this. In a direct comparison of tile, it's thinner obviously, but looks just as nice. And considering no grout-work is needed, I'm so happy. It's also considerably cheaper than doing actual tile as well. Recommendations- get a good straight line paper cutter, it makes cutting straight lines easier and faster than using a straight edge and a blade. Definitely use some sharp scissors and have a good utility knife, especially for outlets. Extra adhesive is probably required, the sticky back didn't feel as sticky as I would have expected. I made sure to also spray along the edge that overlaps the previous piece so it wouldn't risk peeling up. It went so much faster than I expected, and was much easier than I anticipated. Even with kids bugging me every 5 seconds, I got 17 linear feet done in half a day, including the sanding I needed to do first. Tip: I cut one row to do vertically for edging, and it looks a lot cleaner than just cutting a straight edge where it ends. I didn't see any pictures of that, but that's how I've always seen the tile done, so I figured I should do it with this as well. I'll definitely be using this product again, and I really want to try the paintable textured wall panels sometime too!

These look beautiful, if you can get them to stick. The glue on the back is absolutely garbage. I bought my first set and put them on an unpainted recently drywalled wall and they failed to stick, so I assumed it was because the surface had not been painted. The next time I used them was on a newly painted surface that had cured for a week and they still did not stick. Absolute trash adhesive on the back. After having no luck getting the tiles to stay on the wall, as a last resort, I sprayed them with 3m Adhesive, the wall as well as the tiles. They still failed to stick. As a last resort I am going to reglue, then cover them with clear contact paper. Hopefully this will solve the problem but I STRONGLY RECOMMEND that you do not buy these they are totally trash.

Great quality item. The tiles are 3d so they do not look cheap. I live in a rental apt and did not use extra glue. These peel right off when needed so i don’t have to worry. They look like real tiles Im hooked on them. Applying them was very easy but I would suggest watching the video tutorial in this listing. You have to patch some spots to fit so it will take you some time. I added photos here of what I used from the ten pack. I have only one left and will need more to finish this wall. I would buy again

Adhesive is very strong. The look on flat surfaces is deceptively good at appearing to be real tiling. Large flat surfaces are simple to install this product, but be patient in any location where installation requires cutting to meet angled (anywhere not 90 degree) edges.

Tile was definitely not going to work on this curved surface- nor did i have that in the budget! These actually look really nice and I applied them myself. I see tons of flaws that would naturally come with installing something straight onto a curved surface, but none of my customers even notice- even if i point out the mistakes! I would absolutely order again for an inexpensive way to update a space. They go on like a sticker, and the "tile" is sort of a rubber texture. I found them decently easy to remove if I made a mistake, but the surface on which i applied them was a smooth, metal like surface. would absolutely recommend. Just have some patience in applying!

This is the second kitchen I have added these sticker backsplash tiles to. This second time I decided to use this brand because I liked the darker grout color that the other brand didn’t offer and I have SO much regret. I did them the exact same way, cleaned the walls followed exactly, the cheap foil sticker part on the back should have been my first clue. I installed them all, with the normal difficulty. They’re very sticky on both sides oddly enough. Like the tiles themselves are sticky. After 2 days they’re completely falling off all over my kitchen. Some ripping the paint off with it. So so frustrating and so disappointing

These were easy to use. I have an old house so some walls are textured. This wall impartial use to have old tiles and was sanded and painted. They stick well, easy to clean and easy to use. Looks nice.

Cute but doesn’t stick on the walls literally kept falling off. Maybe with some sort of sticky solution would help! They’re very very easy to clean tho