NFHK Oculink SFF-8612 SFF-8611 to PCIE PCI-Express 16x 4x Adapter with SATA Power Port for Mainboard Graphics Card

This works great. It has a power switch on the board but i discovered that if you leave it in the off position it will automatically power on when the Win 4 turns on and switch off when shut down :-) I now have my RTX 4070 setup in an external oculink enclosure running straight off the Win 4 Pro. Note: You will need to download the nvidia error 43 fixer script if you plan to use a nvidia gpu with this board like i did, just google it ;-). Also, I bought a 90 degree atx 24pin adapter to allow this to work in my enclosure because as standard the 24 pin power cable comes straight out the side and would not fit.

Useless without the cable

Works as it should. Getting crazy perfomance on 19 13950hx laptop. Had to use a different nvme oculink adapter tho. So gpu does not shut down with the laptop. But it does shut down is you use the small once it came with. Unfortunately it sticks out wrong way for me so had use another adapter. Works good

Good PCI-E 3.0 PCI-E 3.0 M.2 M-key

indispensabile per fare trasferimenti dati da hard disk ssd

CUDAが必要なときにやむなく外付けで旧型のGeForceを接続するのに使っています。

Using it with a Minisforum UM780XTX. Started out with a Palit RTX 4080 Jetstream. Worked like a charm. However. It seems there is a bit of bottlenecking (to be expected since it's just pcie x4 instead of x16). As an example: CyberPunk 2077 in 4K all settings at Ultra. No RT or resolutionscaling I got about 50 fps. In a x16 slot with an i9 it should be able to get up to about 58 fps with the same settings. So quite a significant loss in performance. However! I did the same thing with an Asrock RX7900XTX Taichi. Same settings it should be able to render about 65 fps in an x16 slot. I got about 63,5 fps with this! And with a quick OC I got 68 fps! This is only one example but it seems to be an indication that AMD cards have a lower need for the higher bandwidth of an x16 slot and works better with a solution like this. Further testing is required but all in all a nice and cheap way to build a tiny system. If I could make one wish it would be a couple of more layers in the PCB to make a bit more rigid. It's a bit soft and bendy but just handle with care and it shouldn't be a problem.

Pues eso que tiene que tener una placa y un adaptador y el caradura que lo vende solo incluye un cable cutre como se ve en la foto, menuda cara tonto se me ha quedado, si compro otro quien me asegura que no pase lo mismo, muy descontento estoy pues lo necesitaba.

I specifically ordered the one with the cable and I did not receive it. Wasted a lot of time waiting for an international delivery and I cannot even use it