GINOYA 18pcs Furniture Bumpers, Silicone Adhesive Clear Bumpers Noise Dampening for Door Cabinet Drawers

Fantastic product.I used it as a cushion for a device holder/tray. The small discs fit perfectly in the holder. Two on each side. (4) Made the fit tighter and secure and guarded against potential damage to my devise. Very easy to use just peal the backing and place it in the desired area.I placed these in 7 months go and they are still in place.The thickness it is comparable to a clip on a plastic mechanical pencil.You could even use this product to place on the bottom of various items to protect your table tops from items scratching your woodwork or glass. (Thinking outside the box)Item highly recommended

Used 2 of them as replacement laptop "feet" for originals which had fallen off. Adhesive holding very firmly. I'm sure I'll find uses for the remaining 14 pieces.

Just what I needed to keep the washing machine door from hitting the door moulding in my laundry room.

My counters seem to dip in the corner because whenever water splashes from the sink it always runs to the corner and gets everything wet. It made the space usable for a lot of things. I really wanted to put the microwave there because it would free up usable prep space and keep the microwave accessible. We were worried about the water causing problems for the microwave so I came up with a solution to solve it. I ordered these and a wood cutting board that would be big enough (I looked for shelves everywhere that would work to hold a 45-55lb microwave but they were all expensive and too tall). So, I just popped these onto the bottom of the cutting board to raise it up above any water and provide us with peace of mind about the microwave. Worked well and I have no complaints. It stays in place but is also easy to move around and adjust when needed. Sticks well and I have a ton more.

Perfect for what I needed. The wife closed the seatbelts in the doors, and I couldn’t bend it back out. Decided to get these to keep the lights from unnecessarily cutting on and off thinking that the doors were opening. So far so good as they are just thick enough and seem great quality. Highly recommend.

Exactly what I needed!

I bought and put 4 of these bumpers on a slanted surface (about 10 degrees) to support 20lbs of weight. The bumpers failed and the load slipped off the surface. Interestingly, the bumpers gripped onto the load fine; it was the adhesive that slipped on the slanted surface! The adhesive is TOO WEAK to withstand the slightest of a shear (parallel to the surface) force, such as the force of a weight slipping down the slanted surface. Note, this also means it won't work for a load that vibrates sideways a lot, which unfortunately includes most types of vibration.To be fair, it is made of quality rubber and does look good; I am keeping the rest of them to use as rubber feet for a stationary load.Again, DO NOT USE WHERE YOU EXPECT ANY SHEAR FORCE PARALLEL TO THE ADHESIVE SURFACE, INCLUDING STRONG VIBRATION.

Worked very well dampened sound also.