Siless 50 mil (1.3mm) 26 sqft Car Sound Deadening mat - Butyl Automotive Sound Deadener - Noise Insulation and Vibration Dampening Material ( 26 sqft)

I was initially concerned about the size of the mats. They came folded in a box. The mats are approx 2ft x 3ft. In the pasted I've recieved similar product as a roll. The mats were much easier to handle. I simply made a small overlap at seems. This was much easier.I only did the floor so far and the sound results are very good. Next I will cover the doors.

This is one of the good ones. There are other brands just as good, and manny brands are worse, but this handles well, rolls down easily, doesn't come off at all easily, and adapts to dips and curves like a champ.Appropriately heavy and dead, I'm happy with the way it smothers panel resonances and even at muffling direct sound, like a big hand over my Uncle Harry's eternally noisy mouth. You can rip the foil but you have to work hard at doing that.Remember to buy a brayer; you can roll overlaps nice and thin. Also remember to pre-wipe the sheet metal with a decent solvent like acetone or Stoddard/Varsol. It should last forever.

Better than i expected. This stuff is very thin but that isnt a bad thing because that makes it easier to install. You dont need a heat gun but i highly recommend using one to get the best bond and get the most out of this mat. If you are looking for a plain mat with no name on it, you can use this stuff and wipe it down with acetone and the ink comes right off.

Works well and helped a lot in my Honda to lower the noise in many things, only thing I’ve noticed is it struggles a little with some road noise but definitely helps quite it pretty well

These do a great job to reduce vibrations in my trunk ..

Favorite budget dynomatt on the market

Great product.

Works amazing