

🚿 Upgrade your flush game with brass precision and silent power!
The FLUSHDADDY NJ208 is a WRAS-approved bottom entry anti-syphon fill valve featuring a robust 0.5-inch brass tail and adjustable height from 205 to 305 mm. Designed for quiet, efficient operation under pressures from 0.13 to 16 bar, it offers easy installation and reliable performance, making it the go-to upgrade for modern cisterns.


| ASIN | B0075IQQKI |
| Batteries Required? | No |
| Batteries included? | No |
| Best Sellers Rank | 26,009 in DIY & Tools ( See Top 100 in DIY & Tools ) 373 in Standard Torches |
| Certification | WRAS, BVAA |
| Colour | Brass |
| Customer Reviews | 4.6 4.6 out of 5 stars (1,696) |
| Date First Available | 4 Feb. 2012 |
| Included Components | 1 x Bottom Entry Anti Syphon Adjustable Fill Valve 0.5-inch Brass Tail WRAS Approved |
| Item Package Quantity | 1 |
| Item Weight | 250 g |
| Item model number | NJ208 |
| Manufacturer | Mark Vitow Ltd |
| Material | Brass |
| Maximum Pressure | 16 Bars |
| Measurement System | Metric |
| Number of Pieces | 1 |
| Part Number | NJ208 |
| Product Dimensions | 10 x 6.7 x 23 cm; 250 g |
| Size | 1/2" TAIL |
| Style | 1/2" Brass |
D**S
Quiet and sturdy fill valve
Bought as a replacement for a cheap generic fill valve that gave up. Slimline cistern but plenty of space, brass inlet pipe is offset and can be used with inlet hole close to wall of cistern (see pic). Measure the height from the floor of the cistern to the top of your overflow pipe and adjust the height of the fill valve accordingly, aim for the CL line/overflow nozzle to be about 1" above the level of the overflow pipe. I found it easier to adjust before install. Note: the overflow tube that runs between the fill valve and the overflow pipe is not included here, make sure to keep the existing one when installing. Hand tightening the fixing nut was enough for a good seal, the tapered rubber washer is good quality. Note that the fixing nut has side flanges to help with tightening, but they do not extend above the level of the nut, so if your fitting is inside a recess you may struggle to fit fingers between the nut and the recess wall, but as a standard size you can use the old one if it is easier to tighten. All in all, great product; simple to fit, quiet fill operation and great value, would buy again!
N**N
Excellent product which is straightforward to install for non plumbers like myself !
A very efficient and effective bottom fed cistern flush unit. It took me slightly longer than other reviews to install at nearly an hour [ which did include the removal of the existing unit ] The installation instructions [ on the box container ] were straight forward, concise and easy to follow. The I design and easy water level adjustment are quick and simple. Like other reviewers i found it better more an access point of view to adjust as near as possible before placement of the flush unit in the cistern.
D**.
Easy to fit and adjust, read the instructions
Replacement for cloakroom toilet flush which died. Know little about these things but took a punt as inexpensive and sturdy looking. In fact was easy to install though needed a couple of tweaks to ensure cistern filled to correct level and has been working without issues for about a year now. Do measure the cistern to ensure it is going to fit before purchasing!
D**S
Decent brass thread, nice price. WATCH OUT FOR INLET DUST COVER INSIDE! Add spanner, PTFE tape, sealant and don't go overboard.
Perfect, especially for the price. Brass fitting is much easier rather than my existing nylon one. The fill is nearly silent, with a semi-quiet 'donk' at when closing. Instructions were brief, but it's pretty easy to figure out how to use it. The adjustableness is a bit fiddly once in, but as there's a lot to adjust, it's really quite easy to get the level right too. Had no problems at all, I'm a total amateur and had it fitted in 20 mins. I recommend PTFE tape, and some sort of sealant, I had some LS-X hanging around. UPDATE: I've fitted two of these now (limescale problems), and they've both been brilliant. I managed to break one by tightening it up too much (no need to!) and not holding onto it, which snapped the arm to the basket. My own fault for trying to do it alone. I also had a bit of trouble with getting the water to cut off smoothly, but a washer/weight on top of the bucket solved it perfectly for me. Probably could've adjusted it, but a washer and silicon was more easily to hand :) Two warnings (Note: I am *not* a plumber!!): 1. Hold onto it as you tighten it up, so it doesn't get trapped against the cistern side. You don't have to over-tighten, don't squash the rubber too much - just nip it enough to stop water leaking out the cistern. A bit of sealant might be a good idea. 2. As other have said, watch out for the insert that blocks/covers the inlet hole! There's a small cone of clear plastic inside. Stick your finger in the brass hole and pull it out before you connect up. Otherwise you will have trouble...
T**.
Just buy this one
Don't even look at other replacement valves just buy this one. We self built our house over thirty years ago and have four loos. Every time an inlet ball valve has perished I've replaced it with similar with its little arm and float and they can be a little bit of a faff to fit and adjust and those in the two more regularly used loos never seem to last long. So when the valve in the main bathroom went again I replaced it with similar from the local plumbers merchants trade counter and in doing so, ham fisted me broke the arm mechanism. So I searched Amazon as I needed it quickly and my local trade counter was now closed for the weekend. Saw this one amongst the usual suspects and thought it looked a bit more advanced and robust but competively priced I so bought it with next day delivery. Easy to fit, easy to adjust and idiot proof. Longevity yet to be proven but it's design and build quality provides more hope than the fiddly old fashioned type.
M**N
No extra parts required
Well pleased once it arrived, quick delivery, easy to fit , working fine , nice and quiet on refilling!
✔**E
J'avoue que ce produit m'a surpris mais pas en bien du tout. Tout d'abord, je pensais prendre une grande marque à un prix un peu plus élevé que la moyenne pour ne pas avoir à le changer dans 2 ans. Sur le papier, ce produit a plein d'avantages. ✅ D'une part, il est vraiment petit et peut s'intégrer dans à peu près toutes les cuves de remplissage toilettes. Comparé à d'autres modèles, il est vraiment 1 cm de moins dans toutes les dimensions. ✅ La vis qui amène l'eau est aussi en laiton plutôt qu'en plastique ce qui devrait faciliter les montage-démontage éventuels. Cela devrait aussi permettre de pouvoir le serrer sans risquer qu'il se démolisse. Il y a un petit filtre d'ailleurs sur cette arrivée d'eau pour éviter que cela vienne boucher votre robinet. ✅ Le flotteur est dans une petite caisse ce qui l'empêche de toucher les bords si vous n'avez pas beaucoup de place. On va dans considérez ceci comme un avantage même si avec de l'eau très calcaire je me demande si ça ne va quand même pas frotter à un moment donné. ✅ Il est extensible et réglable donc vous pouvez aussi le mettre quelle que soit la hauteur d'eau désirée ou la hauteur votre cuve de chasse d'eau Sincèrement quand je l'ai déballé cela faisait vraiment propre avec du plastique de bonne qualité bien ébavuré où l'on sent la qualité. 👁🗨️Dans les détails techniques, le diamètre du filetage pour le tuyau est de 17,2 mm ce qui est un modèle 3/8 pouces aussi appelé du 12x17 ou dn10. Il y a un petit joint de fourni pour le fixer à votre tuyau existant. Il n'y a pas vraiment de règle donc vérifiez bien le diamètre de votre tuyau avant de commander ce modèle. Mais ce que l'on demande à une chasse d'eau c'est de se faire oublier. ❌ Ici le modèle est vraiment beaucoup plus bruyant que celui que j'avais avant. L'eau sort par la base uniquement par 4 emplacements et malgré le fait que ma cuve de chasse d'eau soit en céramique, on entend vraiment l'eau qui coule jusqu'aux remplissage complet. ❌ Pire que ça, le joint fourni sur la vis de montage qui sert de remplissage fuit. Il faut vraiment le serrer comme un malade alors que le boulon est en plastique. (Avec un serrage plastique sur laiton, je vous laisse imaginer qui va gagner. ❌ ❌ Et le top de la déception c'est qu'une fois sur cinq, il fuit doucement avec un petit sifflement que vous entendez très bien sur ma vidéo. La pression de ma maison est à 3,5 bars ce qui est d'ailleurs plutôt faible. Si je tapote un petit peu le flotteur, à ce moment-là elle se ferme complètement, le bruit disparaît. Mais bon, franchement, ce n'est pas possible de fonctionner de cette façon là. ❌ Impossible de contacter le revendeur car cela est vendu directement sur le site. Alors ne perdez pas votre temps avec Flush Daddy. Il est marqué comme garantie 10 ans mais je ne sais pas à qui je dois le renvoyer car il n'y a aucun contact possible. 🎁 J'ai commandé à la place ce modèle que vous pouvez voir sur le lien suivant amzn.to/3K6z8Zn que vous devez recopier dans votre navigateur Internet manuellement. Je l'ai monté immédiatement et il est à la fois plus silencieux et ferme complètement malgré son aspect bien plus plastique. J'espère que mon commentaire tiré d'une expérience réelle vous aidera à choisir le bon mécanisme de chasse d'eau. C'est franchement rageant de passer son temps plié en deux à se battre avec de l'eau pour au final avoir à recommencer une semaine plus tard.
G**O
Sostituito il vecchio in un batter d'occhio e funziona bene
L**A
prompte Lieferung - gute Qualität - einfach zu verbauen - alles top
G**I
Ottimo prezzo e Ottimo prodotto. Consiglio l'acquisto
Trustpilot
2 weeks ago
1 week ago