Proxxon 27006 Table Saw KS 230, 85 W, 230 V, (L x W x H) 240 x 180 x 80 mm

Excellent small bench saw.

Bought this desktop circular saw after reading the reviews. Absolutely no faults found, does 'what it says on the can' and more. I use it for my hobby building large scale RC aircraft. Cuts well and accurately, even very light metals, anything up to 1/2 inch is OK. After three months of continuous use the blade is still sharp. Thus performance is excellent for the size, price and basic features. Recommend it thoroughly if you are seeking the basics at a good price.

used it several times now, works well, although the blade and fence are offset, this causes around 1-2mm difference and does not cut square.

I saw this reviewed in RCME Magazine and bought one. I build and fly radio controlled model aircraft and this machine gives me the power to make precision cuts in wood from balsa up through plywood to hardwood engine bearers. The angle attachment may look flimsy but it works and gives cuts at that awkward angle all models seem to have somewhere and the ability to strip balsa saves money. The machine doesn't take up a lot of space on the work top. It's early days yet so can't say anything as regards longevity but so far I am pleased.

I am in the process of building an Street Organ and have a need for various tools. But making over a hundred pipes by hand, each pipe needing between 12 and 15 parts each, is a little suicidle. So i bought this small table saw to do the job. Bad points first:- Blades are a little expensive and do go blunt quicker with harder woods. Other than that, no bad points. Good Points:- Small, easy to use and if used correctly does an excellant job. In short, a tool that will be much used and much loved. Now if only i could find..........................

I have been a modeller for many years and have always used my regular tools when I need to do work. With a major project pending, which required some precision cutting, I finally decided to invest in the Proxxon KS230. The price was reasonable and the recoomendations I read were good. It arrived very quickly and required almost no preparation. This is a great bit of kit and I use it regularly. I have been extremely impressed with the results and would recommend to other modellers and hobbyists alike.

5 stars from me for this little machine. Cuts walnut, pear, mahogany 6mm without any problems. This saw is only for light use(compact size). Not really good for oak. Very accurate and quiet. Highly recommended. Great for everyone who doesn`t wanna disturb the neighbors.

I use this bench saw regularly for my aero-modelling and more! It is easy to store easy to get out and use and that is why it is used so much. As others have mentioned the blade is the failing, However get a tungsten blade and you will never look back. they last forever. I am still using the first I bought and have replaced 5 standard blades in quick time. I use it for cutting hardwood strips, formers, firewalls. It gets used so much because it is so easy to use. If you are looking at this you are obviously interested or contemplating one, all I can say is buy it you will not regret it all, but get the tungsten blade as well.

...wenn man die Tischkreissäge von Proxxon nicht überfordert. Solange man sich an der gebotenen Leistung wie Schnittiefe und Motorkraft orientiert, ein kleines, feines Werkzeug. Sperrholz, schmale Fußleisten, Rundstäbe, alles kein Problem. Säge ist Proxxon typisch gut verarbeitet, die Konstruktion dauerhaft. Anschluss für Staubabsaugung ist vorhanden, funktioniert mehr oder weniger. Ich öffne den seitlichen Wartungsdeckel nach Gebrauch und sauge das Gerät zusätzlich aus. Anschlusskabel hat gute Länge, das mitgelieferte Sägeblatt ist OK, habe mir aber gleich die anderen, verfügbaren Blätter mitbestellt,um für Eventualitäten vorbereitet zu sein. Der Umbau auf ein anderes Sägeblatt ist sehr einfach. Benötigtes Werkzeug wird mitgeliefert. Insgesamt eine Säge, deren Einsatzbereich recht eingeschränkt ist. Für das,wofür sie gemacht ist, ist sie jedoch Top.

Pour info : Commandé le 07/05 ...Reçu ce jour le 16/05 ... ( Délai correct )... A cet instant j'ai juste éssayé la machine rapidement pour voir si elle aller couper mes panneaux de médiums en 3mm d'épaisseurs...( Au vu des commentaires j'étais scéptique !! ) Mais, les coupes d'éssais ont été un véritable bonheur !! Une coupe comme dans du beurre, pour mon Medium 3mm... La machine ne forçait pas...Elle prenait ces tours sans forcer... C'est un vrai petit jouet !! ( sans oublier que cela reste une scie circulaire, ou un accident peut vite arriver...) Maniable, Pratique ...De bonne manufacture... Rail de guidage réglable, bien fixer... Rail de coupe angulaire aussi pratique que costaud... Voilà, ca reste à tester avec le temps...Mais pour le moment, c 'est un régal !!

hızlı kargolama ve eksiksiz paketleme. Minik bir yatar testere. Maket yapım işlerinde, 1.1 mm kalınlığa kadar çıta ve levha kesim işlerinde kullanılabilir. Başka bir alış-veriş sitesindeki bu makine ile ilgili yorumda, makine üzerinde 50 mm testere (28011 kodlu) ile gönderildiğini söylemişti. Benim ki 58 mm testere (28014 kodlu) ile geldi. Buna çok sevindim. Bu testere tahminimce 1.1 mm ahşabı kesebilir. Tabla kesim siperi gönyesi bozuk hissi veriyor. Defalarca farklı gönyelerle ölçtüm gönyesinde sorun çıkmadı. Sadece ön kontrollerini yaptım. Henüz kullanmadım. Beğenmediğim özellikler: Testere üstü korumalığı tutan metal levha çok ince, sağlamlık hissi vermiyor. Açılı kesim aparatının üst kısmı metal değil, o yüzden sabitleme vidasını aşırı sıkarsanız sorun (ezilme, kırılma vs) çıkabilir. Satın alırken bildiğim ama beğenmediğim özellik: Proxxon bu ürünün ölçülerini %20-30 artırırsa, kullanıcıların daha verimli olarak kullanabileceği bir ölçü kazanabilir. Tahminimce, KS 230'ün ölçüleri artırılırsa 27070FET ile rekabet edebilir hale gelir düşüncesi ile Proxxon bunu yapmıyor. Ama büyük bir firma olmak istiyorsanız, her ürününüzde malzeme kalitesinin yanı sıra kullanıcı verimliliğini de dikkate almanız lazım. Umarım bu yorumum Proxxon'a bir şekilde ulaşır.

Do moich potrzeb pasuje idealnie. Tnie gładko bez zadziorów (nie wiem ikle ciec wytrzyma, na razie jest ich koło 100, ale zapasowe tarcze są łatwe do kupienia). Malutkie, stabilne , z odprowadzeniem na odsysanie. Dodatkowo kątomierz i miarka. Cóż więcej wymagać

This is a hobby saw is small and for small wood pieces. I'm cutting softwood and hardwoods 6mm square and all is good. It is small, light, but accurate. If you're wanting to work with large stock, get something bigger. For what it is designed for, and the price, worth it.