RIIEYOCA XT60 Male to Male Connector no Wire Adapter,XT60 Connector Adapter for RC FPV Car Plane Drone LiPo Battery etc XT60 Port Conversion

that's all folks

Xt60 to xt90 important to have endless connectors in the rc hobby. These work great and connect my lipos perfectly.

These are nicely made. But Very tight fitting.

If you plug this into an XT60 port, you will have...an XT-60 port.It does not adapt male to female or female to male, to do that both ends of the assembly would have to have the same gender; either male (to connect female to female) or female (to connect male to male).I can see no situation in which this "adapter" is useful, unless you have a cable that needs to be 3/4" longer.

I took the shrink wrap off one of these and did not find them to be of very good quality. I was expecting to see some copper wire between the two connectors. All I saw was solder holding them together.I guess they would handle the current going through them. But you would want to firmly mount these in place so they wouldn't flex to keep the solder from breaking. It would be a better value and quality if you just ordered the connectors and shrink wrap to make them yourself.

This is your fix!

I needed an adapter to change the gender of a cable and these worked great. I could have soldered my own but for the low costs of these, they were a quick and easy solution.

They serve their purpose well. Anytime you need a gender Bender for xt60 connections. I used mine to power a diesel heater with a solar power battery station.

To be precise, this product consists of two connectors that have been soldered together and then sealed using shrink wrap. I've taken a closer look at all of them, and I can confirm that the soldering quality is commendable. Unlike some of the cheaper Chinese sets where the positive and negative terminals are occasionally soldered together, this one doesn't exhibit that issue.It's important to note that this assembly is somewhat delicate due to the absence of any additional plastic reinforcement between the two connectors. Essentially, it relies solely on the soldering and the shrink wrap to maintain its structural integrity. Therefore, it's advisable not to exert pressure or subject it to stress in the middle of the connectors.

This product is essentially two connectors that have been soldered together and then securely sealed using shrink wrap. Upon close examination of all the connectors, I can confirm that the soldering work is of good quality.It's important to be aware that this assembly is somewhat fragile because there's no additional plastic reinforcement connecting the two connectors. The integrity of this connection relies solely on the soldering and the shrink wrap. Therefore, it's essential to handle it gently.