Seesii Brushless Cordless Impact Wrench 1/2 inch Max Torque 479 Ft-lbs(650Nm), 3300RPM w/ 2X 4.0 Battery, 6 Sockets,9 Drill,6 Screws, High Power Impact Wrench for Car Home, WH700

"This impact driver boasts excellent quality and power, effortlessly loosening my van wheel nuts. However, the screw bits are a bit soft, wearing out quickly even after minimal usage. After just one screw into wood, the bit head showed signs of wear. Despite this issue, overall, it's a reliable impact driver that performs well."

Used it when changed clutch on the car and was impressed how it can help you to do job faster . Has no problems when removing suspension bolts or wheel bolts .Great tool for me

Took wheel bolts out with no issues at all 125nm. Completely dismantled the front hub within 5 minutes once the wheel was off. The centre hub bolt is torqued to 285nm this gun took very little effort removing the bolt (that did surprise me) Let's see if it stands the test of time.

I decided to buy an impact driver as I seemed to spend so long undoing nuts with my socket set. Researched lots and lots of these over about 3 weeks. Looking at youtube reviews, reading amazon reviews, etc. Finally decided on Seesii as they seemed to be about the best budget version. I decided not to go too cheap (they do get ridiculously cheap) as all reviews on these were disappointing. I also like quality in any item. I was immediately impressed when the item arrived. Sturdy toolbox. Well packed. If you use socket sets already, like me, don't worry about the quality of the accessories as that doesn't matter. The tool itself is sturdy and very solid. Tried immediatly to remove the wheelnuts on my car and all loosened with ease. Now I have some wheel bearing to replace and having done this before I know this will save me a lot of time. Be careful with tightening some buts as this can be very strong and there is still a place for the manual socket set!All in all I fully recommend.

Watched some you tube vids on this product and it looked good, I've used it for multiple tasks now and I absolutely love it, it's a beast, comes with a great bundle also, my best buy for a while.

Seriously, torquing and removing lugh nuts or rusty bolts was always a hassle and required a lot of effort... But this bbbbrrrrrrrtttta and in 3 seconds it's out... BRO HOW is it this powerfull????? And the advertised torque IS REAL, it's kind of scary to have tbh. I worked in a car manufacturing company and as a mechanic .. no airtool hold a candle to this... Well they were 20 years old but still, I'm so happy with this 💞The battery life lasts 3 hours of nonstop work and it charges in 2... But you get 2 batteries and a Makita type hardcase and very handy laptop charger so I'm not complaining, keep in mind it is very beefy and heavy so smaller hands might like something else.

The product overall feels very well built and sturdy.When I received the product I put the batteries on charge straight away. Although the LEDs showed fully charged, the charger took around 2.5 hours to indicate that the batteries were charged.I bought this impact wrench to aid with home vehicle MTX and servicing.The first test - removing wheel lug nuts from my BMW E90. Factory torque setting should be 120-130Nm - much like other users it failed to budge all but 1! HOWEVER - it’s important to remember that most mechanic shops will wizz these nuts on with a pneumatic Impact Wrench with much higher torque settings and with little care for factory figures. I also can’t remember the last time I removed these bolts.I used my breaker bar (as most auto shops also do) to initially loosen the bolts and then used the gun to finish them off. Once removed, I re fitted the bolts and then used a torque wrench to get them up to 130nm. I then re-attempted removal and it took less than a second to re-break and remove the bolts (success! - But I am not sure of the 600nm+ breaking torque claim!)Overall, for £100, think the tool will be a brilliant addition to my collection but as the title explains - don’t expect miracles. If you want something that is going to easily spin off rusted and seized bolts with huge amounts of torque, buy a compressor and a pneumatic wrench!No issues with delivery, items included or packaging.2 batteries which is excellent!Lots of accessories - 6 impact sockets, a number of drill bits and a number of screwdriver heads.Looks like it will be versatile as an electric wrench / screwdriver and hammer drill too with the included accessories.

Found this product, very poor! Fully charged both batteries before use, but Couldn’t undo wheel nuts set at factory torque setting! (120nm) Email seesil but got no response! Understand price point, but this is well below stated specs!! Save your money..So returned it.

I waited a long time before buying a so called off brand high power impact tool, I found this one after studying YT reviewers doing pro type testing. Right to the point, first tried on my POV sedan with lug nuts at 100’lbs in low power mode-no problem, then on my truck lug nuts at 150’lbs still on low power-came off with no problem! I’m only a shade tree type of mechanic so I can’t speak to everyday heavy use but with two 4.0AH batts I’m sure you’re gonna get thru a lot of work. Considering the price point and the very impressive build quality and to mention two batts along with numerous deep well sockets a drill/chuck adapter and a hard shell case, this is a no brainer to buy! Only Con if you want to call it is the slow plug in type charger but if you’re not turing wrenches all day, not an issue, at least for me.

5/23/2023-THE NITTY GRITTY:-Maximum fastening torque is 295 foot pounds, (400Nm).-Maximum nut-busting torque is 332 foot pounds (450Nm).-No-load speed in LOW= 0-2200 rpms, in HIGH= 0-2600 rpms.-Impacts per minute in LOW= 0-3000/min, in HIGH= 0-3500/min.-The price is right. Comparable HFT impact driver would cost $185. w/only 183ft. lbs of torque-3 year warranty and 24/7 email customer service. Very attentive.-Feels good and solid in the hand with a quality motor sound & feel.-Rubberized molded grip and also in blunt force areas.-Approximately 45º of free play in final gear at anvil.-Decent variable speed trigger feel, but not the best.-Choose Auto Stop Brake in reverse or normal reverse. Tool remembers which reverse mode last used.-Non-fan 2.0Amp charger is UL listed (not fake, I looked it up).-SeeSii's Amazon ad claims a 2 hour charge for the 4.0Ah battery (not tested yet).-Real time 4-segment LED manual battery meter on battery. Each LED fades as power is depleted.-The 21v 4.0 Ah battery has Overload, Overheat, and Over discharge protection.-No feet on battery or rubberized protection.-SeeSii battery model SE5000D.-Makita batteries may fit SeeSii.-Comes with 4 commonly used deep Impact sockets of ok quality.-Bright LED work at base, light is activated by trigger. Stays on 10 seconds after trigger is let go.-You can depress the trigger just enough so the tool comes out of sleep mode w/o motor activation.-English owner's manual is completely legible, however, it's a bit vague on battery care and feeding.-Decent blown-molded case. Tool, charger & battery fit tight. Sockets are loose in compartment.TIP: HAVING A TOUGH TIME GETTING SOCKETS ON AND OFF?Assuming there is nothing damaged with the anvil, hog ring or there aren't any burrs inside the socket, the best way to get sockets onto the anvil is to twist while pushing them on til they mate with the anvil, NOT push them straight on. Wiggle and pull the socket straight off to remove. Wiggling it helps sockets and anvils with machining anomalies (like metal burrs and clearance issues) clear each other during removal. It also help burrs smooth out. A little oil or light grease on the anvil may help to break it in but don't let dirt build up under the hog ring and periodically wipe the anvil and hog ring clean. This is only pertinent when first used. As you use the tool more and more, the anvil should loosen up. If it doesn't and you think the hog ring simply has too much sprung diameter, carefully try to squeeze it closed with the smoothest jawed pliers you have. DO NOT chew up the hog ring or anvil with vice grips. If you have any sockets that have burrs inside from machining, it's best to file them smooth or acquire better sockets. The sockets that come with it are okay for minor projects but cleaning up any poor machining and finish coating will make them EZ on-off.I did a lot of homework looking at sub compact cordless 3/8" impact wrenches / impact drivers, and I was just about to buy the Harbor Freight Tools Hercules new Model HCB81K1 Impact Driver kit for $97.99. The Hercules driver only has 183ft. lbs (2200 inch lbs) of torque UNFORTUNATELY, it turns out that the Hercules kit only gives you a tiny 2.0amp battery and the included charger "looks" identical to their 5 amp fast charger but is actually only a 1.5 amp slow charger. Oddly, they no longer sell either of these underwhelming item individually in the stores. They only come with the kits to give you a more perceived/deceived value (boo, hiss HFT!). If you wanted to get a decent Hercules 4.0Ah battery and 5 amp fast charger with their driver, it would cost you about $185.00 total and you'd still have the useless slow charger and low-tech under powered battery to dispose of (which BTW, small batteries DO inhibit the torque of the tool).COMPACT CORDLESS IMPACT WRENCH vs. AN IMPACT DRIVER?I'm actually surprised I have not heard anybody talk much about this, but in my opinion, I believe an impact wrench is best used for automotive repair and an impact driver is for woodworking and construction projects. Sure, either one can be turned into the other using adapters. If you plan to mostly work on your car, it makes more sense to get a compact impact WRENCH than a compact impact driver. With square drive, you simply attach your sockets which keeps the profile of the tool as small as possible. This is good for tight spaces. On the other hand, if you buy a compact impact DRIVER and want to use sockets, you'll need to use a hex to square drive adapter that will increase the length of the tool, making it harder to get into tight spaces under the hood. You can always turn an impact wrench into a driver with the plethora of adapters they sell on Amazon. So the question is, what will you primarily be using this tool for?I hope this helps. Guitartec

No esperaba que tuviuera la suficiente fuerza para quitar los birlos de una camioneta, pero me quede sorprendido con la facilidad que los quita y los aprieta.excelente producto se siente de muy buen material.

Wow what a gun did not realize how much torque gun had bought on gun before Christmas with one battery bought another gun after chromas with two battery’s and 25% coupon very happy with this product you will not be disappointed

I work as an auto mechanic and figured I would try this 3/8 impact I took it to work used a few times seemed a little weak SEESII customer service contacted me and asked me what was wrong, and they decided to help me out with a stronger impact wrench and let me tell you they did just that they have some great customer service the kit I received not only is strong but its good enough to use at work. Used it all day and battery life is great, I recommend you buy this if you need a cordless impact wrench