Tokatuker 12V DC Wired Water Detectors Water Leak Alarm Module Leakage Flood Sensor with 10A NC NO Relay Output Control, Turns Off Flood Source (White)

Tokatuker 12V DC Wired Water Detectors Water Leak Alarm Module Leakage Flood Sensor with 10A NC NO Relay Output Control, Turns Off Flood Source (White)

Q: Not able to adjust the sensitivity, the alarm is always on. Any recommendations.

Yes I had the same problem. However as a electronic Tech. I could make a a slight change in the circuit to Rectify that. However I could not submit the cure For other than personal use. Call the company that made it. They might just replace it.

Q: Can this be wired to turn on a bildge pump instead of the siren?

In a bilge application and underway, you would need two of these to trigger the pump to turn on and off when the water has not gotten deep enough to require the bilge pump to turn on. I would put one low enough so that it stays submerged, signal lost if uncovered by water. Then when the higher sensor detected water a latching relay that is tripped would keep the pump running, use another relay for the pump, and when the lower sensor becomes uncovered the pump shuts off. You need two of the devices, you can have more than one sensor, I have 6 on each devices monitoring area.

Q: Using on a bilge pump. issue is once the bilge was pumped out any slight amount of water kicks the pump on and immediately off. do i need delay relay?

Use a back flow preventer in the pump output hose to keep water returning to the bilge which then restarts the pump after the pumps first shuts off.

Q: Will this detect cat urine? Cat will pee along a certain wall, want to hide 2 wires in the carpet edge, alarm scares cat and alert me

I would think that it would, I am using it for detecting spills in water stores that refill 5 gallon cooler bottles, and it works perfectly on the city water, however the Permeate, low TDS water has to have a really large contact area to trip the sensor. The long wires version should work the best. I even had to add some salt crystals near the sensor to get the product water to become conductive enough. My recommendation is to buy it, use your wires to try it, if it doesn't work return it becuase you did not use their sensors. Strip your wires and place them near each other and cover the whole length where the pee pools on the floor you need the liquid to conduct the signal.

4.5/5

Product ID: 416748399

Secure Transaction

Details

Connector type
Screw
Contact material
Silver
Contact type
Normally Open
Current rating
10 Amps
Mounting type
Surface Mount

⚡12V DC power for seamless integration

🔄10A NC/NO relay output for automated control

🔔80dB built-in buzzer for instant alerts

Frequently Bought Together

12V DC Wired Water Detectors Water Leak Alarm Module Leakage Flood Sensor with 10A NC NO Relay Output Control, Turns Off Flood Source (White)

Floor Water Sensor for Flood and Leak Detection (6 ft)

Wired water sensor Relay dry contact signal output Water level sensor DC12V power water detector Applicable to the equipment room and base station

Description

💧 Stay dry, stay ahead — never miss a leak again!

PLUG PLAY SETUP - Compact, wired design with surface mount profile for easy installation in any home or office.
CUSTOM SENSITIVITY - Adjust detection sensitivity to avoid false alarms and ensure reliable monitoring.
SMART RELAY CONTROL - 10A relay output lets you automate shut-off valves or sirens, stopping damage before it spreads.
INSTANT FLOOD DEFENSE - Detects leaks immediately and triggers an 80dB alarm to protect your space.
PEACE OF MIND ALWAYS - Continuous 12V DC power ensures your water safety system never sleeps.

The Tokatuker 12V DC Wired Water Leak Detector combines precise water sensing with an 80dB buzzer and a powerful 10A relay output, enabling automated flood prevention. Designed for easy installation and adjustable sensitivity, it integrates seamlessly into security or standalone water monitoring systems to protect your home or office from costly water damage.

Specifications

Manufacturer	Tokatuker
Item Weight	91 g
Product Dimensions	8.2 x 5 x 3.2 cm; 91 g
Color	White
Power source type	Corded Electric
Voltage	15 Volts
Noise Level	80 dB
Measurement System	Imperial
Plug Profile	Surface Mount
Batteries Included?	No
Batteries Required?	No

Have a Question? See What Others Asked

Not able to adjust the sensitivity, the alarm is always on. Any recommendations.

Can this be wired to turn on a bildge pump instead of the siren?

Using on a bilge pump. issue is once the bilge was pumped out any slight amount of water kicks the pump on and immediately off. do i need delay relay?

Will this detect cat urine? Cat will pee along a certain wall, want to hide 2 wires in the carpet edge, alarm scares cat and alert me

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Anita G.

Good experience, but the tracking updates could be better.

2 months ago

Zainab N.

Fantastic and great service. Shipping was faster than expected.

1 week ago

View all Trustpilot reviews

Shop Global, Save with Desertcart

Value for Money

Competitive prices on a vast range of products

Shop Globally

Serving over 300 million shoppers across more than 200 countries

Enhanced Protection

Trusted payment options loved by worldwide shoppers

Customer Assurance

Trusted payment options loved by worldwide shoppers.

Desertcart App

Shop on the go, anytime, anywhere.

€ 39.90

Duties & taxes incl.

Irelandstore

Free Returns

30 daysfor PRO membership users

15 dayswithout membership

Secure Transaction

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Sneha T.

Received my product in pristine condition. Great service overall.

1 month ago

Anjali K.

The product quality is outstanding. Exactly what I needed for my work.

1 month ago

View all Trustpilot reviews