Eiseng Steering Wheel Cover for 3 Spokes 8th Honda Civic 2007 2008 2009 2010 2011 DIY Sew Interior Accessories 13.5-14.5 inches Stitch On Wrap Black Genuine Leather (Red Thread)

Other than the 3-4 hours I spent sewing this onto a steering wheel, this product is great. I bought a junk wheel from a yard and disassembled it so I could see this in easily. It was still an undertaking to get this sewn on and I had every advantage possible. I would not recommend doing this to a wheel attached to the car unless you’re very flexible and skilled with a needle.Quality seems good. Time will tell in the az sun. With it installed this wheel feels brand new. Spent $80 on a junkyard wheel and the cover rather than 400+ on a brand new one. It was worth the neck pain

it has a great look, feels comfy... just the stiching took longer than expected (5 hours). But else, fit perfect. Civic 2010.

I tried this product to replace the decaying wrap on my steering wheel. I ripped out the old leather and covered the bare rubber steering wheel with this wrap.Presentation:The plastic envelope it was shipped in came with the wrap, double sided tape, a pair of scissors (essentially forceps with blades at the end), red thread, instructions, and a straight needle. Nice touch on including plenty of thread.Quality:Leather isn't bad. It's not the best because it's thick but it's not too rough but not too soft. If you wanted to, you could get your own premium leather fabric and cut out the shape yourself and install it that way if you want premium leather (I don't recommend it. It's a headache. Ask me how I know.). Speaking of cut outs, this wrap had the proper cut outs to wrap around all of the edges of the steering wheel so every inch is covered. Nice touch! You can easily tuck in the leather under the steering wheel trim.Installation:Easy installation with the included instructions. There are plenty of other videos out there showing similar installations so as other reviews say, watch the videos. Make sure to align the wrap constantly and tighten the stitch to keep it lined up at all times. Take your time like others have said, even if it takes hours. It's definitely worth it and you'll be able to see any issues if it's not aligned properly then you'll have to start over.

I ordered this after watching a few YouTube videos to get an idea of the installation difficulty. I figured it was worth a shot.I used the supplied double-sided tape to line everything up as carefully as possible. Before you start stitching, make sure you've lined up the wrap perfectly with the three spokes, then tuck everything in. It will take a bit of force to get the material under the plastic, so get someone with a bit of arm-strength to help if you don't feel comfortable with that.Once everything is tucked, the rest is pretty easy. Look at youtube videos for examples, but essentially you're just going back and forth, skipping one loop every time. I threaded every loop in the "nooks and crannies" of the wheel to make it a bit tighter.One major tip I have in regards to stitching: You can do all the stitches, but don't tie off the end right away. Instead, leave the end unsecured, and start back and the beginning and pull up the thread, sort of similar to tying a shoelace. Keep pulling the extra slack up (I used the plastic tool they provided) and simultaneously use your other hand to pinch the leather together. Again, youtube is your friend here, but hopefully this makes sense.I saw someone mention a chemical smell, and I would say while there is a scent to it, it's actually quite nice. Smells like dyed leather. Almost has a new car smell, like a BMW with leather seats.All in all I'm really happy with how it came out, looks almost like it was installed in the factory.

I was originally thinking this was a bad idea but when I finished I was very pleased with results, no more ugly crusty steering wheel.

Not bad, there is a half inch gap in the seam and even had the leather tear at one point. To my knowledge my steering wheel is stock.Just know that there are after market options more expensive but you get the quality.

Don't buy this cover unless you have at least 3 hours to spend putting it in. It too 2 of us to do this. One pushing the needle into the leather and the other pulling it through with channel locks. The end result is o.k. It is not as smooth as the picture is. We have a Honda 2010 Civic and it was really difficult to push the extra leather into the gaps at the 6, 3, and 9 positions. All and all this is way too hard to put on and way too time consuming.

I was pleased with the result, and this is the main thing! I did the installation without removing the steering wheel from the car, nothing complicated, the main thing is to remember that the steering wheel is spinning) It took, as written in the instructions, 3-3.5 hours, the main difficulty was to put all the edges exactly so that the seam was evenly oriented along the seam of the old braid steering wheel. High-quality product in the set has everything you need for installation. Good luck to all!