MSI MAG CORELIQUID 240R V2 AIO CPU Liquid Cooler - Rotatable ARGB Blockhead, Integrated Radiator Pump, Split-Flow Water Cooling, Evaporation-Proof Tubing, Easy to Install - AMD & Intel Compatible

An excellent piece of kit, very easy to fit as the fans are pre fitted to the radiator and it requires only a single connection instead of the jumble of wires normally associated with AIO coolers. The infinity mirror looks very impressive and is just the right amount of cool and bling. Cooling seems very good and my temps are low, not really taxed it yet but I am confident it will deliver. The ambient noise is low, but will tweak the fan curves if required under heavy load. All in all very happy with this purchase.

Purchased this cooler to compliment my MSI MAG X870 TOMAHAWK WIFI. I have been using this for 2 months now and it performs fantastically.System was a breeze to fit and comes with all the mounts you could want ( also includes AM5). The fans came pre attached and wired in sync to separate fan and ARBG cables which made things so much easier.It keeps my CPU temps below 38C in general use and below 70C under maximum stress testing.After a little bit of tinkering with the fan bios it runs ultra quiet.The ARGB on the radiator and pump casing run seamlessly with the system using the MSI Centre and the infinity effect on the CPU cover is pretty cool.

I purchased this cooler to use with a new build based around an Intel i7 12700k processor, and they work really well together.My temperatures rarely (if ever) go above 64 degrees with normal use, and also when gaming or photo editing.I did have to tweak fan profiles on my new system to get acceptable noise levels, and have now achieved what is for me a decent compromise with fan noise (the whole system, not just the radiator) and performance/temperatures.Fitting the radiator was straight forward. Fitting the cooling block to the processor was equally as simple, using the very good LGA1700 fitting kit supplied in the box. The hoses are quite stiff, so care must be taken to find the best alignment when fixing the block, but for me all went well.I did find initially that there was a quite noticeable whine from the otherwise silent pump. I subsequently found that if I altered the settings for the pump speed in the fan profiles (found in the motherboard BIOS - in my case an MSI MPG Edge Wifi) to slighly less than the 4000 rpm the noise disappeared.Also, and this is purely my preference, I later replaced both of the MSI fans that came with the radiator with a couple of Noctua fans (which are in my opinion the best fans around for noise/cooling). There is nothing wrong with the supplied fans, but when they rev up they do create a bit of noise. The Noctuas spin more slowly and are therfore quieter.Everything required for fitting to a range of processors is included in the very substantial box. Instructions are so-so, which seems par for the course nowadays, but the assembly of this kit is fairly simple if care is taken.So far I am really pleased that I purchased this cooling set up. I found it to be very comprehensive, easy to fit and very efficient when it comes to doing it's job. The fact there is no added bling with fairy lights and all sorts (which keeps costs down) is a huge plus for me.I most certainly recommend this set up to anyone who is looking for a straight forward, capable cooler.

Great CPU cooler! It has a very premium feel, with high-quality materials, and the LCD screen is a lot of fun to customize - I didn't even miss RGB lights thanks to it. With that in mind, I'd say it was worth the price and would recommend it to anyone who wants a great CPU cooler and likes to have everything customized.One thing that I wish the manual told you is that, while screwing the 3 fans into the base, you shouldn't do it one fan at a time, but instead have all 3 fans in position with the screws right above their holes, and then alternate between tightening each of them little by little. If you do it one by one, you'll find that the rubber from one fan will end up covering the screw hole for the next fan due to pressure from the screws.Connecting the cooler to my AM5 CPU was quite easy, but you might want to use some cable ties for the cables that power the 3 fans, as they can be a bit awkward to manage and are quite a bit longer than they needed to be. While that's better than having cables that are too short, it would be nice if the fans plugged into each other magnetically so you only needed to connect a cable to one of them. But this is only a minor annoyance during installation, so the cooler still deserves 5 stars.