SlipX Solutions Microban-Infused Square Adhesive Anti-Slip Safety Treads, Reliable Grip for Bathtubs, Showers, Stairs & More, Power Grip Floor Grips (21 Count, White) Design Your Own Pattern

Cleaned the tub, rinsed with rubbing alcohol, just as the directions stated. I placed them (with the backing still attached) until I was satisfied with how it looked. I used a plastic putty knife to smooth them out, remove air bubbles, etc.The directions say to wait 12 hours before using. I've used SlipX decals before. They lasted almost 5 years. I was impressed with the longevity.

We love our SlipX Solutions Adhesive Squares and they look amazing! We read the reviews and followed the directions of: 1. Clean & remove any film or residue from the shower floor;2. Let it dry completely;3. Using a hair dryer, heat the floor of the shower for a few seconds (I even heated the decal for a second to warm the glue on the back); then immediately remove the backing from the decal and lay it flat-making sure all of the bubbles are out from under the decal, pressing down as you move out the air underneath.4. Repeat for each decal.It’s not hard work but it does take some time so prepare for it so you don’t rush. We used two sets and it was just enough.Hint: lay out the pattern you want first when the decals still have backing, move them around, find the pattern you love THEN take a picture of it so you can refer to the original pattern as you are working. Believe me, that will save you a lot of time.We have had the decals on for several months and no problems at all! I would buy these again!

My shower floor is not completely smooth and these stick great. No complaints. Ordering more for my other shower tub.

I would have rated these a 5 star but, the center decals where the shower water hits them curl up. Could be my husband taking very Hot showers. They do discolor over time. This is my second package due to replacing the curled up peices. But I have to say cleaning products might be part of that. Otherwise they work very well and look nice.

UPDATE: AUGUST 2019I am thrilled to report that it is now 8 months since I first applied these SlipX Safety Treads in our bathtub and they are as pristine as the day I put them down. Not a one has moved or started peeling up and there is absolutely no sign of any mold or mildew whatsoever. It truly surprises me that there are still so many negative reviews being written but I guess it all depends on the surface of the individual tub or in the application. For me, I am beyond pleased!ORIGINAL REVIEW: JANUARY 2019I was tired of the usual bathmat nightmares - mildew, having to rinse and hang to air dry after every shower. Yuck! You all know the drill and misery so I took a chance on these SlipX Solutions Adhesive Square Safety Treads as an alternative.I used two packs of these safety treads to create the "bathmat" full coverage design you see in the picture I have attached. The length of our tub bottom is 47".I noticed that when I put them down by hand, with just pressing the squares down with my fingers I couldn't really apply enough pressure to get all of the bubbles out from underneath the treads. Part of the problem is that the treads are rough and it is tough on the skin of your fingers to try to press any harder to get better adhesion. So, I looked for something solid that was close to identical of the width of the thin sided treads and came up with the flat top of the cap of a bottle of nail polish. With the tightly closed, inverted bottle of nail polish in hand (and this is where the "elbow grease" part of the application comes in), I went over each and every inch of each and every tread pressing down hard with the plastic nail polish cap until 98% of the bubbles were gone (you can see the difference in the 2nd photo I attached). After a few minutes, a couple of bubbles reappeared under some of the treads but I was diligent in making sure that I had every outer edge of each tread completely pressed down. I will admit, it wasn't easy but I was determined to make these treads work.In conclusion, the treads have been down for a month now and not a one has moved or loosened and I had feared that where some rare, small bubbles had reappeared under some of the treads that mildew would start growing under the treads but so far, no problem at all. It was, admittedly a lot of work to secure each one individually as I did but, let me tell you, it was sooooo worth it! I now have a totally maintenance-free bathtub - we shower and get out of the tub and don't give a second thought to the "bath mat". Hallelujah! I really do believe that, if you are willing to put in the extra time and work at the point of installation, these treads could be a dream come true for you too.

Looks wonderful

Thanks

These look nice and are easy to put down in the shower however the suction doesn’t last too long and the adhesion has come undone already after two or three showers. And yes I cleaned the tub and it was completely dry when I applied the stick ons.

Not pleased with these. Installed them correctly but they began to discolor underneath after a couple of months. I’ve tried cleaning the tub every which way, including soaking it in a bleach solution for hours, but the creepy mold remains. Will have to remove and replace ASAP.

Bought these for secure footing in the shower (post car accident physio and rehab--cannot afford a slip or fall, hence why I bought them). Surface was clean and dry when I applied them. I had a shower the next day. Next night they had dis-adhered and were sitting by the drain. Collected them up this am before getting in the shower and upon stepping in the shower had them sliding around under my feet. TERRIBLE PRODUCT!!! WASTE OF MONEY.

I followed all the installation instructions, cleaned floor with alcohol, waited till dry, sticked it firm and didn't touch the sticky side, allow them to sit for 24hr.Hilariously, anti-slip stickers, half of them came off one by one during my shower and it actually very slippery when water is between it and the surface!! How can I trust these things can protect the elderlies and children in my home from slipping? Luckily that was me having the first shower after installation. I can't imagine what can happen if an elderly trust this thing to help him anti-slip!!!Totally wasting my time and effort!Returning them.Rather pay more for 3M, don't ever try safety things with low price.

For the most part these are great! I bought them for my mom because she is elderly and worried about slipping in the shower. She had an old rubber mat in there, but it attracted mildew and was kinda gross. In fact, she's having the bathroom redone to get the tub replaced later in the year (so please excuse the grime and overall icky nature of the tub in the photos), but we wanted something to keep her from slipping in the meantime.She loves the color teal, so these are a good match for her shower curtain (teal), and her bath mat (teal), and her shower puff sponge thing (teal), and virtually everything else in her house because she is all-in on the teal concept.They have individual backing paper on them, so you can test out your pattern on the shower floor before sticking them, and they were relatively easy to adhere. They are roughly textured on the top for your feet to grip in the shower, but a word of warning.... use a glove or something when pushing these down to stick them to the tub, since that grip texture will chew up the palm of your hand if you're trying to push them down bare-handed. Learn from my mistakes folks, I took that one for the team.The instructions say that after sticking them you should leave them for 12 hours to set. I left them for about 15 hours or so before getting them wet, and so far they have stuck on very well. I bought 2 packs so that we could line the whole bottom of the tub (don't want mom slipping and cracking her head open just because she wandered into the wrong end of the tub during her shower), so you can see in the picture how much space they cover. That tub is a pretty standard size, and I think 2 packs was perfect for it.The only complaint I have about them is that the material is translucent instead of opaque. There were a few chips and scuffs in the enamel of the tub that I was hoping these could help to hide. Instead, those chips and scuffs would be permanently highlighted and protected under the adhesive of these stickers. I didn't notice the translucent nature of the material until it was too late, and I was like "Oh no!" So I tried to line them up with the edges so as not to attract attention to them (not that anyone besides mom or close family are ever IN the tub area to see them... but I still strive for the best even if there will be no public acclaim!) Anyhow, it's not a life-or-death thing, but something you should know when buying these.All in all though it's a very good product, and well worth the purchase price. Feel free to copy my design if you like, or go out on your own creative limb. The world is your burrito!

Terrible product. I cleaned the tub the day before, washed it really good. The next day I used the alcohol swabs to clean the area. Used a blow dryer to make sure all was good and dry afterwards. Placed the stickers all inside the tub, walked on top of them for 5 - 10 minutes. Then waited another 24 hours before using the tub. After 2-3 showers from the family, they peeled off faster than a hookers pants on pay day !!! I wouldn't buy these unless you're using them for looks and don't use your shower or tub 😉