WEILEITE 4WD Transfer Case Shift Motor Actuator Assy Compatible With Toyota 4RUNNER 2012-2017 Toyota Tacoma 2005-2016 Toyota Tundra 2000-2006 Replaces Toyota 36410-34015 3641034015

--2001 Tundra with push button 4WD--I only used parts of it. Replaced the plastic gear with shaft, and and outside cover with the contacts on mine. Working great. Had trouble originally just replacing the outside cover, so I used the plastic gear and internal shaft as well. Had to manually turn the gear once installed to get it back to 2wd, after that, worked like a champ.Came quick in the mail, and quality was good.Would recommend.

When you attempt to remove the existing you'll need to access the the screw and gear inside the triangular plate. Remove screw and gear leaving the rod. You'll need to do the same to the new one. You'll want to plug in the new one and engage 4wdand disengage. This will give relief to the gear on the new part so you can remove that shaft. Mount the new part on the old shaft and your good. The old shaft has to stay unless you want to drop the entire transfer case.

The product seems to be good quality and our 4WD on our Toyota Tundra now works

This transfer case actuator did not work. When plugged into my 2006 Tacoma wiring harness it just caused the indicator on the dash to flash. The actuator did not move. Since I had a lot of time invested in this replacement, I took off the cover to look inside. The photo shows what I found. The inner circuit ring was partially covered in the plastic potting material which prevented the wiper from making electrical contact. This unit could never have passed if it was factory tested - which obviously it wasn't.I repaired the unit by dremeling off the excess plastic.

It appears to be made well.

Installed on a 2009 Tacoma with 234000 miles works perfect only took 30 minutes to install no need to remove transfer case.

works good, have 4wd again alot cheaper than oem part

Not strong enough