eXtremeRate Scarlet Red Replacement Buttons for Xbox One Elite Series 2 Controller, LB RB LT RT Bumpers Triggers ABXY Start Back Sync Profile Switch Keys for Xbox Elite Series 2 Core

Was not expecting these buttons to come with a whole installation kit, too! A pry tool, spare screws and both required screwdrivers. Really great bit of kit.The buttons look great and have a brilliant colour to them, and fit great, too. And the company even has a video on youtube showing how to install them which I followed.The hardest part of the installation is the initial removal of the faceplate which is held on with clips and glue. Be sure to warm up the front of the controller with a hairdryer to loosen the glue, the clips are easy to pop off, but forcing the glue will cause you to scuff or gouge the edges of your controller if you aren't careful.I found the included pry tool wasn't enough on it's own to shift the face plate. So I also used an old credit card wrapped with a microfiber cloth to help wedge the faceplate off. Use the hairdryer in bursts and take it slowly, the pry tool can damage or scuff the edges, so use it to get the initial gap wide enough to wedge the card in, and then take it slow as you go around the edges.Be careful not to gouge the rubberized grips around the sides, as well. But if you avoid using the pry tool on the sides and focus on wedging it open from the top, you'll be fine.I was able to perfectly remove the faceplate without a speck of damage with this method.The hairdyer tip applies to unscrewing the thumbsticks, too.

Perfect fitting buttons as always from Extremerate.I only use these for my custom creations 👏👏

Acceptable product replacement for existing buttons on Elite controller. Nice colour. Easy to fit if you view online videos first to find out how it’s done.

I got a button set and a faceplate and I'm soo glad with how it looks now, easy to install if u follow a yt video witch the company who supplied them have, recommend to anyone

The product was fine. It didn’t fit perfectly but for the price I paid I didn’t have high hopes. I ended up returning the product as it wasn’t brilliant. Bought as a replacement for a broken bumper but it didn’t fix anything.

I had to carry out some analogue stick repairs, so I thought I might as well change the colour scheme of my elite 2 controller since I was opening it up. I got this replacement button kit, but unfortunately the bumper button, trim and the trigger buttons are not moulded very well, so they don't fit properly, the triggers became sticky once fitted, one of the bumper buttons stuck in whenever pressed, the sync button too was a terrible fit. In the end I had to settle for the front facing buttons only, even they rattle in the controller a bit. I really don't recommend this button kit at all.

Got me out of a spot with a damaged controller, fit perfectly. Hardest part was opening the controller but that's nothing to do with the seller of this, that's how microsoft build them! A lot cheaper than sending it away to be repaired.

Like others have said there is a slight wobble with the AXYB buttons but its not something to write home about. I'm still very happy but the seller should try to make these buttons ever so slightly bigger. This would make all the difference and make a perfect product.Easy to install

I have installed all buttons, and they all work fine, except the bumpers. The left side does not click anymore and I cant press it. I have reverted back to the original bumpers and now they work again. Due to the face buttons being more difficult to remove, I have decided not to return it, but be wary of that before you buy.

The media could not be loaded.  I'll start off by saying these aftermarket replacement buttons look beautiful. The Scarlett red is absolutely gorgeous and has a nice deep red with a hint of an anodized look!As far as installation goes. For the most part it's pretty straight forward. The only hard part for me was the bumpers as the USB-C port hole wasn't big enough and literally scrapped away the paint as I pushed it into place.As far as functionality goes my sync button will no longer press at all now and is stuck in place, I'm guessing because the space tolerance is too tight. My LB button also feels very stiff now and barely clicks when I press it. The A X Y B buttons all work, however they fit somewhat loosely now and rattle around quite a bit, especially the X button. Triggers and middle buttons are all great and feel and work just fine! (Included a video for this)I'm going to try them out for a couple weeks and update the review at a later day to see if anything loosens up. As it stands right now, I'd only give a 3 stars for the value of what you're getting. I could've got a bad batch, but for the price I don't think I'll be trying my luck again any time soon!**Update**ExtremeRate reached out to me over email to address the issue personally and they ended up sending me a replacement set of buttons and the buttons fit much better. Minimal rattle and feel much more crisp! Definitely bumping this up to 5 stars for customer service and the effort made to make sure I got a quality fitment for my controller. I do highly recommend giving these replacement buttons a try because once they're good, they're amazing!**Update 2**I purchased another set of the replacement buttons. This time in the chrome gold set. And they are great. No fitment issues. They feel and look good and everything functions perfect! Happy I pulled the trigger on another set. Again highly recommend!

Serán muy bonitos, pero no funcionan bien, son un timo, he tenido que poner los del mando original,, incluso llevándolo a una tienda de electrónica no funcionan bien, no los compreis

La verdad no lo recomiendo. La calidad es mala y no son fáciles de instalar, además de que las herramientas que trae no son suficientes para instalarlas. Dejen su control cómo está ya que se ve y se siente mucho mejor que con estos botones.

Super Qualität, gerne wieder und endlich ein Unikat (auch wenn ich es eigentlich erst nach der Garantie machen wollte, habe ich es jetzt vorgezogen da meine original LT Taste leider nach einem leichten Sturz kaputt war) naja dafür gab es dann jetzt wenigstens ansprechenden ersatzt