WYNNsky Shop Air Line Kit, 1/2 Inch OD×60 Feet PU Air Tube with Push to Connect Fittings, Industrial Type Quick Connect Coupler and Plug, 28PCS Garage Air Compressor Accessories Kit

this is a great compressed air line system it comes with ever thing that I needed for my set up no leaks as long as you don't move the connection to much you should not get any leaks. The push to connect fittings are better than the compression fittings that others use like the rapidair system dose. For the money its well worth it, if you get this system the company that makes this makes two different ones make sure you get this one even though the other one is cheaper there have been a lot of reports that it leaks so save your self some time and just get this one.

The kit needed some hangers to attach to ceiling and wall.

I spent time setting up all the fitting and running the line and the first thing,, it ruptured, I mended that and the next day it ruptured again, all the while my compressor is running continuously. so my advice,, don't but this product,, by the way, it is rated for 300 psi, my compressor only runs a max of 150 psi

I just installed the 1/2" in my new shop. Air pressure is good at the end of a 60 ft. run. Very nice to work with and easy to install. So easy I ordered a second box and added more outlets. Use the cutting tool that comes with the kit , install a "Tee" and make your new run to an outlet. Only had the system in service for six weeks , but no leaks at 130 psi. Wall mount outlets for quick disconnects a must have.

Ran air to the shop using this kit. Would have liked to have end fixtures included but got those seperately.

Very easy installation. The line comes rolled in the box and I let it sit in the sun for about an hour which made it easier to manage.Remember that your filters/water separators should be about 20 feet from your compressor to allow the air to cool and condense.Very impressed after pressure was added to the system and all the connections were leak free.

Probably OK if one shuts down the system when not in use. I was very careful to make straight cuts and make sure the tubing was properly seated in the elbow, tees, etc., but still tiny, almost imperceptible leaks would not let me keep the line pressured 24/7 without my compressor cycling. I've installed a system shut off valve and will keep this kit for the time being, but intend to go ahead and spend the $$ and install copper air line for the long term.

No good