🔧 Elevate Your 3D Printing Game!
The Mudder Hardened Steel Nozzle is a high-performance 0.4 mm MK8 nozzle designed for 3D printing enthusiasts. Made from durable hardened tool steel, it offers exceptional heat and wear resistance, ensuring long-lasting use. Compatible with a wide range of 3D printers, it delivers precise extrusion with minimal error, making it ideal for both standard and advanced filaments.
J**E
Good tips
Used for Ender 3….worked well, no complaints. Value pricing was nice.
G**L
Good product
It performes as described.
C**2
These work, but buy spares!
After reading some of the other reviews that complained that the nozzle size was inconsistent, I ordered the 10 pack instead of the 5 pack. I'm glad I did. I ran a cleaning needle through each nozzle and half of them wouldn't fit the nozzle. So there's something going on with manufacture quality there. That's why I didn't give these 5 starts.The ones that were sized appropriately work fine. I loaded up some PA6-CF filament from Polymaker, dialed in my settings, and was printing in no time. Buy some extras, test them with a cleaning needle, and you should be fine.
P**D
They were ok.
For the price you can’t ask for too much. They were doing the job, but I felt that they were getting clogged easy.Good for spare backup.
J**S
These work great for abrasive filament
This install pretty easily. The only "gotcha" is that there are only two flats on the nozzle instead of being a hex shape. This means that your wrench only goes on two ways, and you can't really use a socket to tighten the nozzle. It has been working great for a bunch of glow in the dark prints that I have done though. I haven't tried any fiber infused filament though. I didn't need to make any changes to the temperature to get it to print well.
D**.
Does not print for crap
I could not get anything but underextrusion with one of these nozzles. I cranked the heat up to 230 and dropped the speed way down, but the only thing that would come out of the nozzle was little spurts like it was clogged. I did a cold pull and still no dice. I put a normal brass nozzle back on and immediately printed like a dream. I think the issue was, like others have said, inconsistent nozzle diameter.
D**N
Great Nozzles
These nozzles have been great for me. No complaints.
M**M
Made my extruder hop
I'm not an expert, but here's my experience:Installed on ender 3. Could not get it to print either matte PLA or standard white petg at any temperatures (tried up to 230 for PLA and 250 for petg). Extruder would squeeze out a little material but kept hopping and underextruding. Switched back to brass and everything working fine. ¯\_(ツ)_/¯Your mileage may vary
Trustpilot
1 month ago
3 days ago