TIMco PIF110 Plastic Insulation Fixing M8 x 110 - Zinc (Bag of 100),Silver

Perfect for installing 62.5mm insulation plasterboard

Bought these to fix insulation boards on to wood battens, not their original purpose which is to fix to block work directly. Probably my own inexperience found them difficult to drive home correctly and not removable if not in far enough, needed to cut head off and redrill hole. Changed to using screw and washer to secure which was a far easier method. Probably a good product when used correctly however not a great loss as good value for money.

Easy instalatiion and impossible to pull out from the wall if used with appropriate glue. Good price too.Recomended++++

Bought for a job at work, does what I wanted

Fixings don't sit flush no mater how deep the hole is. 8mm hole drilled, air dusted to clear hole. Fixings either bend or sit proud of the surface. Tried to use them to mount 37mm insulated plasterboard. Returned for a refund after having to cut 8/10 attempts free from the board.

Used these to put up 37 mm insulation boards,used bond it form and used these as a mechanical fixing, drill with a 8 mm drill. But most importantly clean out the hole with drill bit or these will bend or get stuck in half way ,then you find it difficult to pull out the plugs as they will get stuck

Easy to use, just drill and hammer in

actually used it for fixing weed barrier cloth to ground, before laying stone chips. Does the job quicker, easier and better than pegs.