Popsicles Molds, MEETRUE 12 Pieces Silicone Popsicle Molds Easy-Release BPA-free Popsicle Maker Molds Ice Pop Molds Homemade Popsicle Ice Pop Maker with 50PCS Popsicle Sticks+Cleaning Brush

Love this popsicle molds! I use them for my left over smoothies, or when I want sugar free Popsicles. Cleans easy, no leaking, and easy removal of Popsicles.

I have been making so many different popsicles since getting this. I had a flat popsicle mold that makes 4 at a time but has a large foot print. This takes up about as much space but makes 3 times as many popsicles and is less likely to spill or get stuff dropped in it while in the freezer. I keep a black plastic tray I got from a Quick Meal lunch and makes transferring to the freezer easy. It's easy to clean. I love the lid, which also makes holding the sticks PERFECTLY in place. People say to run water over it, but I don't need to do that. I just take it out and twist it a bit and then push up from the bottom. It's SILICON. It's Flexible. I don't need to tug on the handle, I just twist it till the surfaces pop away from the mold, and push from the bottom to force the popsicle up and out. I save the popsicles in quart sized freezer bags, I can get 5-6 in the bag at a time stacked like books. I leave the mold in the freezer , ready to use, in its carry tray because then I alway have a space for it to go for my next popsicle project. Flavors I've made: Pickle Juice Chamoy Tajin, Blueberry Kefir Pops, Fresh Strawberry Tajin, Yogurt Apple Pie, I'm looking forward to trying many more new flavors because of how easy it is to fill, and remove and reuse. I despise my old hard plastic one, it cracked and the plastic sticks were terrible. I use wooden and acrylyc popsicle sticks. Wooden for the ones I give away and acrylic for my personal stash. The acrylic sticks are not too thick to fit within the lid. I just have to wiggle it a bit and it fits in just fine, no tearing or forcing, and it slides right out for the finished product. Note: getting the lid off may be a bit difficult at first. because you are trying to lift the lid off of all the sticks at once, it will stretch and bind as it tries to pull up. What you should do is take something long like a wooden spoon handle and work it under the lid and slide it up just a bit on the sticks, but not too high, then move over to the next gap and slide that up a bit, and then the end, and work it up bit by bit across the entire mold till you can tease one end off, and then it will slide easily off the rest of the sticks. I'll post a video when I get a chance to make a new batch.

I would love to give these a 5 star, but I tried to make chocolate covered Ice cream bars but the chocolate sticks to the mold. There is no weird smell or taste to the food, and the size is perfect. I had no problem filling them and made regular frozen yogurt bars . The quality is great well made. I never had any kind of leakage after filling it and placing in the freezer.

Easy to fill and includes lines to prevent overfilling. SUPER easy to get popsicles out when they are frozen. Easy to clean and store.

These work great! While I recommend placing a tray under them when moving to the freezer after filling them, they are sturdy and easy to clean. We eat a lot of Popsicles and this allows me to save money on the fresh fruit frozen desserts we love. And a great way to use up extra fruits. I recommend getting a book or two with other popsicle recipes, as these are quick and easy to use. And you're going to want to try all kinds of flavors.

OMG. I’m gonna regret this day the rest of my life. My faith in my strength and my hand capabilities were truly tested today. Do NOT buy this popsicle holder if you do not have the strength of 10 men, nimble and dexterous fingers and very strong teeth. The links I had to go to to get these popsicles out were extraordinary. Only the love for my grandchildren kept me going past the finish line. I would liken it to being in the ocean in a strong riptide. You cannot get out. The waves keep sucking at your feet and keeping you in the water. You fight and fight because you know this is potentially a fight for your life.. that was me. I was the popsicle and the holder was the wave. I finally had to resort to using my teeth to pull them out while simultaneously pulling down on the holder. Put it this way: if you’re a little grandmother… your average grandmother who’s not like me an ex bodybuilder, your grandkids would be screwed. The only bonus I would say is I feel like I’ve had an arm workout today. Buy a different set. And the people who wrote that you just pop it out from the bottom, I’m clearly living in a different universe than you. They are too close set to be able to do that. So buy at your own risk. Know that your limits of strength, agility, hand, strength, and teeth are going to be tested. Good luck, soldiers.

I absolutely love this MEETRUE 12-piece silicone popsicle mold set! It’s perfect for making healthy, homemade popsicles for my family. The silicone material makes it super easy to release the popsicles without any cracking or hassle. I’ve had issues with plastic molds in the past, but these pop out effortlessly every time. It comes with 50 wooden sticks, a cleaning brush, individual popsicle bags, and even gold twist ties—everything you need to make and store popsicles. The molds are sturdy, BPA-free, and easy to clean, which is a huge bonus. I’ve already made fresh fruit juice pops my toddler, and they’ve turned out great. Highly recommend for anyone who loves a fun, DIY treat at home!

I made my first batch of strawberry and cream paletas and this mold was perfect. The popsicle sticks provided were nice and smooth and were held in place well while freezing. The plastic bags are a little thin and I tore a couple of them sliding the popsicle into them, but now that I'm aware how delicate they are I have been able to manage not tearing anymore. I do like that they have a seal. I store each bar in their own bag and then take all of them and store them together in a freezer bag. I've made a couple of batches now and already have more bags and popsicle sticks on order. I plan on stocking my freezer with lots of flavors in preparation for the upcoming heat this summer.

Perfektes Material. Dass der Deckel nicht fest abdichtet, ist zwar ein bisschen unpraktisch, aber für Produkte mit solchen Dimensionen und Materialien auch eher üblich. Dafür sind die Form sehr platzsparend, was im Tiefkühler für mich ein ausschlaggebendes Kriterium ist. Tipps: * Beim Rausziehen natürlich unbedingt das Silikon leicht mit der Hand wärmen und jedes Eis einzeln nach oben drücken. Wer am Stiel rauszieht, legt's drauf an, ihn zu verlieren. * Vorher schon planen, wie man den mit Flüssigkeit gefüllten Block dann am besten in den Tiefkühler bekommt; ggf. vorher die entsprechende Lade rausnehmen. * Ich habe ungefähr einen Liter verbraucht. * Stiele als Erstes reinstecken kann nicht schaden; falls die Masse dann nicht reicht, kann man ja welche rausziehen. Der Block hält aber auch sicher dem Druck stand, wenn man die Stiele in den befüllten Block reinsteckt, solange man's nicht sehr ungeduldig macht. * Ich würde zum Lagern nicht die mitgelieferten Sackerl verwenden, sondern einen Beutel für alle fertigen Stieleise. Sie frieren kein bisschen zusammen (solange man sie nicht zu lange auftauen lässt), hab's getestet. Im ersten Durchlauf hatte ich trotz einigem Fett (Soja-Kochcrème) in der Masse sowohl in gemischter Beerenmasse als auch in reinem Sahneeis sehr feste Eiskristalle. Hat sicher auch was mit der Gefriertemperatur zu tun, aber ich werd's nächstes Mal mal mit 1-2 Esslöffeln Stärke probieren und mich dann nochmal melden. Wobei die Eiskristalle auch einen Anreiz bieten können, zu lutschen statt zu beißen, wenn man länger was davon haben will.

I'm getting the product earlier and it's very good quality!

ottimo prodotto testato e facile da usare pratico per la pulizia per fare uscire i ghiaccioli dallo stampo aspettato 1 minuto usciti dal frezeer premendo nella parte inferiore usciti con estrema facilita'

Product as described and works well. Easy to remove being silicone. Stands up sturdy in the freezer. I like it.

The lid, needed for the wooden sticks to stay put, freezes solid to all the popsicles therefore it is impossible to remove the lid. You need to defrost the lid with lukewarm water. You can’t take out one popsicle at a time. You have to immediately defrost them all. I threw it away. I stick to the plastic singular ones.