WaterCop LeakStopPlus Single-Point Leak Detection, 1-1/4 In. (WCLSLFA-1-1-4)

Description

LeakStop Plus 1 1/4 In. With Twin Attached Water Sensors, Auto Shut-Off, Secure Interface For water heaters or other water using appliances with 1 1/4 inch pipe, use this single appliance LeakStop PLUS WaterCop WCLSLFA 1 1/4 system. Lead free LeakStop Plus has two attached moisture sensors. Water supply is automatically shut off when one or both sensors detect moisture. At the same time, the LeakStop notifies via a light, buzzer, auto dialer or security automation system if the third party device is hard-wired to the unit's conduit. Please note this unit can not operate with other WaterCop sensors. WaterCop LeakStop Plus WCLSLFA 1 1/41 1/4 Inch Valve System: For plumbing line installations. Must be installed upstream of appliance or area to monitor. Two attached sensor probes must be placed where water is most likely to accumulate if a leak occurs. Ideal for water heaters. Nearly 8-million homeowners replace failing water heaters each year. Many fail within a few years of installation. LeakStop PLUS Specifications: Max working pressure – 125PSIG Ambient temperature – 35 degrees to 105 degrees F. Voltage – 12VDC 1 phase (includes 115V wall transformer, 20 foot cord) Valve – Full port brass NSF61G ‘Lead Free†1 1/4†NPT – 77 GPM (Gallons Per Minute), Unrestricted flow rate. Sensor wires are each 10 ft. long Requires 110VAC power: power cord is 20 ft long. The WaterCop LeakStop 1.25 inch Valve System: Constantly monitors for accumulating moisture Valve remains closed until it has been manually reset 1 1/4 inch low lead brass valve. Manually open/close the valve with soft touch buttons on the actuator Made in USA