Draft Warehouse Easy Beer Line Cleaning Attachment

I had the deluxe KegCo cleaning kit where you detach the beer line from the coupler and then attach the cleaning kit to the beer line so you can clean the line and faucet at the same time. It’s always a pain to clean the coupler, although other than that it does a decent job.The”Easy Beer Line Cleaner” advertises that it attaches to ‘most’ line cleaner kits. However it does not fit the coupler end cleaning kits, only faucet end kits. Despite this it was a simple matter to run my KegCo fitting under hot water and remove the line from the pump to the fitting, and then remove the Sankey end of the Easy Beer Line Cleaner. The I/D isn’t identical, but with a couple of small zipties the cleaning line attached directly to the sankey end, and it works like a charm. So much easier and faster to clean coupler, line, and faucet all at the same time. Now it’s no big deal to clean every keg, whereas before I’d get lazy and maybe do it every other keg, or every third if I was drinking them quickly!So in short, doesn’t fit my cleaning kit, but was able to make it work - and when it works it’s brilliant.

No more having to bust out the wrench when I want to clean my beer lines, as this little device simplifies the whole process. It twists right on to my sankey couplers and doesn't leak during use. I've been recommending it to anyone I know who has draft beer at home.

Clean beer lines are important to ensure good beer tastes good.I coupled the Draft Warehouse Easy Beer Line Cleaning Attachment with the KegWorks Deluxe Beer Line Cleaning Kit - w/ 32 Ounce Liquid (https://www.amazon.com/KegWorks-Deluxe-Beer-Line-Cleaning/dp/B0002EAJZK)This attachment allows you to clean your tap, lines, and faucet all while keeping your faucet attached to the tower!All you have to do is connect the end of KegWorks kit to the Draft Warehouse Attachment then the Draft Warehouse Attachment to your tap. Engage the tap, pump the KegWorks pump bottle (filled with cleaning solution, of course) and open the faucet to let the cleaner flow through your keg system into a suitable vessel. Close the faucet when half of the bottle is empty and let it sit for a bit to allow it to deep clean the system. Once you're done, flush with the remaining cleaner then fill the bottle up with water and flush the system until the cleaner is gone. Easy-peezy and no mess!

Overall worked well....once I figured out how to get it connected.Like another person mentioned, it fits some keg cleaning kits. I have a kegco and the fittings didn't match. What worked for me is taking the Sankey connection off and connecting it to kegco line directly as pictured. The tube and small end piece were not needed.Once I figured that out, worked perfectly. Easy to connect and disconnect making the cleaning process easier.

Cleaning beer lines isn’t on the top of anyone’s list. Good beer is though. Prior to purchasing this product, I dreaded the whole process. I just wanted to hookup my new keg and have a beer! Disassembling all the components and soaking etc. simply took too much time, a necessary evil. Now, things couldn’t be simpler. Get a pump and some good beer line cleaner, hook this up to your keg coupler and backflush your coupler, lines and faucet in one shot! I do it every time I change my kegs. Takes 20 minutes... 15 of those minutes is letting the beer line cleaner do it’s thing. Easy. Done.

Why do you say in the description it will fit with the kegco line cleaning pump. You send it with an attachment that fits the faucet not the pump. Its doesn't attach to the pump kit like described.

Yeah. Do you love having your kegerator but absolutely hate having to disassemble the entire faucet and run your solution through from the top every single time you want to clean it? That's how I was until I bought this and a deluxe cleaning kit that you pressurize the liquid and it gets sent up and out the faucet. This thing connects easily to the Sanke connector and to my bottle's hose. I haven't had any problems with it and it's the only one that I've seen that you can do this so ... This was an easy decision for me to make.

I hoped this was what I needed, but with 4 taps its not so slick. I'll switch to a different cleaning system.