SIQUK 40 Pieces 3D Printer Nozzle and Cleaning Needles Kit MK8 Nozzle Specification Colour: gold Material: brass Hexagon diameter: 6 mm Screw thread: M6 Input diameter: 1.75 mm Output diameter: 0.2 mm, 0.3 mm, 0.4 mm, 0.5 mm, 0.6 mm, 0.8 mm, 1.0 mm Quantity: 24 pieces in total Nozzle Cleaning Needles Specification Material: stainless steel Bit diameter: 0.15mm, 0.25mm, 0.35mm, 0.4mm, 0.5mm Compatibility: compatible with most of 3D printers extruder nozzles offered from E3D Makerbot, MK8 Makerbot RepRap. Quantity: 16 pieces in total Note Don't use the needles to clean until the nozzle is heated over 200 degrees. Sharp accessories, please keep them away from children. Package included 2x0.15mm drill bit 2x0.25mm drill bit 5x0.35mm drill bit 5x0.4mm drill bit 2x0.5mm drill bit 2 x 0.2 mm MK8 Nozzle 2 x 0.3 mm MK8 Nozzle 12 x 0.4 mm MK8 Nozzle 2 x 0.5 mm MK8 Nozzle 2 x 0.6 mm MK8 Nozzle 2 x 0.8 mm MK8 Nozzle 2 x 1.0 mm MK8 Nozzle 1 x Plastic box
P**T
Be careful when choosing the size
These were the wrong nozzles but I was able to use them on a different application.Happy enough with them
W**Y
Definitely worth getting for more control and range of prints
After using my Creality Ender 3 v2 for a few weeks I wanted to try different size nozzles so brought the 24 piece nozzle and cleaning needle kit to be able to print a range of different things, smaller sizes for detailed prints and bigger sizes for not so detailed prints.Comes with sizes 1.0, 0.8, 0.6, 0.5, 0.4, 0.3, 0.2 So far I've tried sizes 0.2, 0.5, 0.6 and 0.8 the smaller sizes definitely makes for a more detailed print but it can take a bit longer to finish we're as the bigger sizes it's not so detailed, still good but finishes the print quicker.I recommend this kit to give you more control over what your printing and if you need more detail or not.The kit comes in a plastic box with the nozzles in little bags so I decided to print out a dedicated Nozzle holder seen in the picture.
G**S
Fits my Huafast Mini S
Nice set of nozzles in a handy box, perfect fit and great printing on my Huafast printer
R**E
Good value for money,
Grate product everything you need in one box have used with no problems good value for money
P**N
Nice selection
This little set comes in a nice little box to keep it all together. The nozzles work well and its an easy swap to change them. Just make sure that you change your slicer settings for the different size nozzles. I've not had need for the rods to clean the nozzles as of yet but you get a rod for each of the nozzle sizes.
B**I
Not all cleaning needles supplied
It's a simple set, you get what you paid for. The only issue is that not every supplied nozzle size has a corresponding cleaning needle in the box.
A**K
Great tool kit
Great little tool kit. I've used a few different sizes of these nozzles and they have all printed out perfectly. No issues with blocking etc. They heat up just fine.
A**E
Nice little set
I bought this for my ender 3 mainly as it included the cleaning needless. The nozzles seem of decent quality and the needles do the trick
Trustpilot
1 day ago
2 weeks ago