3IDEA 3D Pen Printer Filament - 16 Colors 1.75mm PLA Refills Pack - Each Color 5M Length - High-Precision Diameter Linear - DIY 3D Artist Supply Accessories for Creative Hobbies

The 3Idea Technology PLA White Filament is a high-quality filament that is perfect for 3D printing. It has a dimensional accuracy of +/- 0.03mm, which means that you can expect consistent and precise prints every time. The filament is made from high-quality materials that ensure durability and reliability. It is also easy to use and works well with a wide range of 3D printers. The filament is compatible with 3D printers that support 1.75mm filament. The 1kg spool of filament is packaged in a vacuum-sealed bag with a desiccant to ensure that it stays dry and free from moisture. The spool is also easy to load onto your 3D printer, thanks to its design. Overall, the 3Idea Technology PLA White Filament is a great choice for anyone who is looking for high-quality filament for their 3D printer. It is easy to use, reliable, and produces consistent and precise prints.

Decent filament but packing could be better. Ita not vaccum packed. Had gotten the first one replaced at it seemed loosely packed and used.. The replacement turned out similarly packed but decided to try it anyway.. Prints came out fine.

Silver Abs filament. Prints well but need more adjustments on settings. Current setup print quality is good. Current temperature 250c - 110c. Printed on Creality Ender 3. Print quality can be increased by changing settings. The material is strong with 10-15 % infill with 3 loop wall.

The filament is very bad. The print had so many bulges and lines. The parts come out very brittle, most break while removing them from the printer. The bed adhesion is the only good thing with this. Wol3d works much better for me. Wont recommend this to anyone with bambu.

Like others have stated, its main issue is inconsistency. Its stringy and doesnt matter how much you tweak the retraction, it deviates soon and you end up with a lot of stringy goop. I have had a few prints fail because of clogging and low bed adhesion as well. Bed adhesion can be improved via brim settings. end of the day, it is what you pay for. This is the cheapest filament out there, and will be good for prototyping UPDATE after using 1/4th the spool: First layer temp - 210C Print temp - 205C First layer bed temp = 60C printing bed temp = 50C Retraction 8mm I used it on my ender 3, with a custom part cooler shroud. Part cooling is important for this filament as it is quite goopy. With these settings you will get decent prints, however the moisture in the filament causes issues with finish. i bought another similarly priced spool (elegant goop) *wink* and that filament is 100x better than this for a slightly higher price.

EXCELLET FILAMENT , MAKE SURE UR HOTEND HAS PROPER COOLING , JAMMING IS NOT VERY MUCH . COLOUR SAME AS SHOWN (IN MY CASE METAL BLUE AND GOLD)

Good one but not the best worth for the money that's it ♥️👍

Nicely vacuum packed. Does have good strength as it did not break while hanging from spool to printer. Though recommended temperature for printing is 190-210., it did have problem in adhesion which was resolved by bringing bed very slightly close to nozzle and increasing extruder temperature for first layer to 205. Now perfect adhesion. I think it's probably because of higher strength of material. I would recommend this filament and will look to buy in bulk if seller gives good deal. Update : Included video of print quality. Printer is Ender 3 with skr mini e3 board, model printed is baby groot cup. Model is really smooth, nice filament. As you can see in video it is printed without supports and excellent bed adhesion with manual bed levelling only.

Kurzfassung: ordentliches Filament, mit fairem Preis , schöne Oberfläche So jetzt der längere Text.... Gesucht war ein dunkelbraunes Filament (PLA) für den Druck von Schatztruhen und Fässern für eine Schnitzeljagd. Es sollte nicht allzu teuer sein, aber auch nicht das günstigste und unter Umständen unbrauchbarste Filament sein. Die Problematik das günstiges Filament leider oftmals Mängel hat hatte ich zu oft. Im Internet waren die Bewertungen zu ICE mehr positiv als negativ, also mal ran an den Test. Und ich wurde nicht enttäuscht. Die "Schrumpfung" bei diesem Filamnt hält sich in Grenzen, gedruckte Gewinde mussten bei mir nicht nachgearbeitet werden. Verpackung: ordentlich, starke Folie, Vakuum, Trocknungsgranulat - so wie es sein soll Handhabung, Druck, Haftung: PLA standart, Wicklung sauber Temperatur PLA Standart bei mir (Hotend 195° / Bett 60°). Haftung super (auf FR4- (Blackprint) Platte). Farbe: schönes dunkles braun, mittelkräftige Farbdeckung (4 Layer a 0,15mm braucht es bis kein Gegenlicht durchkommt) zu dem Bild: Eulen von links nach rechts: Tinmorry - kaky matt - PLA XingtongZhilian - coffee marmor - PLA Janbex - wood - HolzPLA eSun - hellbraun - PLA+ M4P - Kupfer - PLA ICE - Barbaric brown - PLA

Lo uso con un lápiz 3D y va bien para 2D, no 3D, como era de esperar, por ser PLA. Tengo la sensación de que el filamento es ligeramente más delgado que los otros, pero el lápiz lo admite sin grandes problemas. A veces hay que ayudarle un poco empujándolo hasta que el motor logra moverlo, pero como con otras marcas. El color es marrón chocolate, y queda realmente bien. La curvatura del filamento (viene en bobina) no ejerce tanta tensión sobre el lápiz como otras marcas, por lo que en este sentido es estupendo.

not recommend

The filament came cut in small 5cm(!) pieces - see yellow color on the photo. Also not sure that every color is really 5m as mentioned in the description.

I got the MeDoozy 3D pen plus several rolls of extra filament for my 6 yr old granddaughter for Christmas. She loves it! I refilled her filament supply for her birthday. She asked for more again this Christmas. She loves making framed pictures to give as gifts. Great product with great value to inspire creativity.