ILLUMISHIELD Screen Protector Compatible with OnePlus One (3-Pack) Clear HD Shield Anti-Bubble and Anti-Fingerprint PET Film

I'm a little torn, but awarding 3 stars. I wanted to give it a better review, but there's one negative that's holding me back. Here's the low-down:Positive:1. Amazingly easy to install on my OnePlus One. How they have this set up is genius - you pull back a tab 2 inches revealing the sticky side, place the protector on the top part of the phone, make your adjustments and then pull downwards on the same tab (removing the rest of the backing). Boom. Perfect. Zero bubbles.2. I really can't tell a tactile difference with it on my screen. It feels pretty much the same. It isn't sticky and my finger glides smoothly over the surface.3. It's very clear and is pretty much invisible on the phone. Note: it doesn't cover the ENTIRE front glass - it's off by 1 or 2mm - I feel that this is on purpose - it allows better alignment. It really isn't noticeable.Negatives1. Camera cut out is a little off. It doesn't obstruct the lens or anything, but it's the only noticeable flaw. It would have been better if there wasn't a cut out at all.2. This is the reason for 3 stars - this screen protector IS NOT ANTI-FINGERPRINT. I actually think it picks up MORE fingerprints than the actual OnePlus One screen! It's insane and looks like I've rubbed grease all over my screen after a few hours of use. one positive is that the screen does clean easier than without the protector, but when has that ever been an issue that needed improving?

Very satisfied with these screen protectors. Kit does come with a microfiber cleaning cloth as well as a cardboard applicator for removing bubbles.I got lucky on my first attempt and was able to nail it 100 percent by lining up the front camera hole with the speaker grill. From there it's a careful lay down to the bottom and then iron out the bubbles. Removed the second protector and not a bubble was to be found. cured immediately and was ready for use. Screen protector is almost undetectable. Leaves no hue or discoloration and is for the most part anti glare. Texture was it is almost spot on glass like with a very minor resistance when swiping.Overall I am very impressed with the quality and application. Would have gladly paid the money just for one but with three it is a superb value and does not detract from the phone in the slightest. Many owners vouch for the Gorilla glass and do not use a protector but given the quality of these there is no reason not to use one.

If the air is dry such as in the mountainous west you will have to deal with static electricity. I was unable to get a good install due to the adhesive side of the shield attracting particles as I peeled back the plastic layer. The product is fine and I almost had a good install except for one little particle on the adhesive which I could not remove. I would advise you to do the install of the shield in a bathroom fresh with humidity from someone having taken a bath or shower just moments prior. That should work. Anyone who lives out here knows what I am talking about. Dry air allows dust particles to drift about and any static electricity generated by peeling away a plastic cover will attract sizeable particles to spoil the application of the shield.

No matter how much 'bubble free' they advertise, a screen protector will end up always with bubbles...The shield is extremely precise, and since the phone has a bezel around the screen, if you are not 100% precise when you start putting the screen on, by the time you get to the end, the protector is going on top of the bezel, and leaving a large area where it does not cling to the screen, leaving a bubble-like line.I had to take some scissors and cut a tiny slice off it. Then putting it was easy (and yes, it is still protect the screen, especially considering that I'm using a bumper protective case that encase the screen for a tiny bit).Another problem: I cleaned the surface perfectly, but by the time I went to put the screen protector on, a tiny speck of dist landed either on the screen or on the sheet while peeling off the protection. Result: I have a bubble I can't take it out.So, yes some of the problems might be related to my clumsiness installing it, but it could have been a bit smaller for less risk of going over the bezel.

This protector is easy to put on without bubble and is very clear and sensitive to touch. However, it does not repel fingerprints as much as I had hoped although the cloth provided is good at cleaning them off. I called customer service and they were extremely helpful and understanding. They told me the matte version would probably be a better choice for me and sent it right out telling me to call back if I had any problems in the future. I am very impressed with their customer service! They also said they are constantly working on their materials to make them more fingerprint resistant. I would definitely buy from this company again in the future thanks to their amazing customer service. I will update this once I receive my matte version.

My experience begins with the ArmorSuit screen protector for the OnePlus One (see my full review on that product's page).With the ArmorSuit, despite following the steps detailed in the install video, the screen protector turned into dust/bubble filled mess. Even though I was sitting in a dust-free environment during install, I had bubbles under the film. After the screen protector "cured", the phone traveled with me in my pocket; but collected a ton of lint. My gorgeous phone looked ugly - and performed badly ("sticky" touchscreen experience).Long story, short - I finally decided to buy the iLLumiShield screen protector instead. The iLLumiShield costs around the same as the ArmorSuit, took all of two minutes to put on, didn't/doesn't have any bubbles, hasn't change the touch experience, and also looks great (glossy)! If all of that wasn't enough - iLLumiShield sent me three protectors in the pack (vs. ArmorSuit's one at a time).If you want my advice - get the iLLumiShield.

One of the best screen protectors around. Not necessarily the cheapest, but the best. The instructions are clear and accurate. the package comes with three screen protectors, a cloth and a plastic card. The screen protector was very easy to apply

iLLumiShield - OnePlus One Screen Protector claims that it is "Anti-Fingerprint" . It is a false claim there are finger prints left on the screen after use. I bought it specifically because it would reduce the finger prints left on the screen after use. Kindly dont buy it if that is the same reason you are looking at the same reason.

Really poor screen protector in my opinion. I've gone through 2 of these in quick succession, and I am very careful with my phone (OnePlus One) it seems that somehow the screen protector catches on my pocket and comes loose, which splits the protector. Very disappointing.

good but it is not anti finger print

Good...